CITY OF INDUSTRY, CA (12.19.2017) – The North Hall at CES will see a spectacular new Cadence on the show floor.

Enrique Avalos, Sales and Marketing Manager, commented “We made great strides in 2017 with the Cadence brand with new dealers and distributors coming on board. We plan for 2018 to be even better as we unveil a strong lineup of new products in a spectacular new booth.”

In addition to Cadence products, the latest from the Logic and OnCore brands will be on display in the North Hall booth 3702.

From the Cadence sales side John Velez stated, “We are working on some strong CES Show Specials plus a few surprises to excite everyone.”

To set an appointment at CES 2018 please call 626-465-3383 or email This email address is being protected from spambots. You need JavaScript enabled to view it. or This email address is being protected from spambots. You need JavaScript enabled to view it.

FullVue™ replaces Rear View Mirror with 9.8" or 8.5" Touch Screen Display featuring Digital Rear Camera with user adjustable angle, 1080P Dash Cam and GPS...

January 2, 2018... Houston, TX -- DriveAssist Technologies, premier supplier of safety and convenience products for the automotive aftermarket, will begin shipping their FullVue™ Rear View Monitor to select 12 volt specialists in the US and Canada this month. FullVue™ eliminates obstructions such as headrests, luggage and passengers and increases the field of vision by an estimated 300% over traditional rear view mirrors.

"The FullVue™ mirror represents the state of the art in rear vision and comes in 2 High Definition sizes that display 1080P streaming video captured from a rear mounted digital camera and a built-in 1080P Dash Cam. FullVue™ employs a Quad Core CPU that allows recording from both cameras to an included SD card. The integrated Dash Cam has a G Sensor built in and features GPS for vehicle tracking and incident archiving even when parked overnight said Bob Goodman, Vice President of Sales & Marketing. The touch screen allows the user to move the image up or down to adjust the view angle for parking and towing use. The DVR recording is continuous with resolution up to 1080P, the built in G-Sensor initiates event archiving in case of an accident or other incident and is stored on the supplied 8GB Micro SD Card with a maximum of 64GB. Included is a universal mount and vehicle specific mounting solutions for those requiring it are available separately. The user may also easily toggle between mirror and video display when desired", says Goodman.

FullVue Press 010218
FullVue Mirror Functionality
Vehicle Safety and Driver Assistance is the fastest growing category in the Automotive Aftermarket industry. DriveAssist's parent company Cybcar America brings 10 plus years of history supplying leading edge products that seamlessly integrate into the vehicles design. markets and we have already begun signing up high profile 12 volt specialists and expeditors in the United States and Canada", says Goodman. To accommodate our resale partners we offer an aggressive Freight Policy including deeply discounted expedited shipping, all DriveAssist Products include a Lifetime Warranty", added Goodman.
The FullVue™ Monitor will be available this month with an MSRP of $549.95 & $579.95.
About DriveAssist…
DriveAssist is a leader in Advanced Vehicle Solutions and can be reached at
Cybcar America
4930 Dacoma Street Suite F
Houston, TX 77092
830.267.8868
This email address is being protected from spambots. You need JavaScript enabled to view it.
http://www.driveassist.us

Holly Hill, FL - January 2, 2018 – Axxess® by Metra Electronics® is reintroducing improved technology for thirteen vehicle-specific radio replacement interfaces in their AX-Series at CES booth #5211 in the North Hall. The AX-Series features proprietary, built-in steering wheel control technology, now with new and improved features. The patented Axxess auto-detect technology provides an easy to install solution with one interface that will do it all. A new reset button improves the initialization process, located between the two Micro-Fit™ connectors. This placement prevents the button from accidentally being pressed, but also provides a much easier way for installers to reset the interface, when needed.

The AX-Series provides accessory power for 12-volt, 10-amp, retains R.A.P. (Retained Accessory Power) and retains audio controls on the steering wheel. Depending on the vehicle, SYNC or OnStar may also be retained. The interface can be installed in both amplified and non-amplified models, and provides NAV outputs for parking brake, reverse and speed sense. The interface is updatable by Micro “B” USB. All harnessing is cloth taped for a clean installation. Additional interface features will vary by vehicle application, available for Chrysler, Ford, GM, Hyundai/Kia, Mazda and Toyota/Lexus models for select years.

AX-Series Radio Replacement Interfaces for Chrysler

Axxess has two solutions for Chrysler, both which provide high level speaker input. The AX-CH013-SWC is for Chrysler models from 2004 and up*. The AX-CH5-SWC is for Chrysler models from 2013 and up*. This specific interface also retains the factory backup camera if it is through the factory radio, and the factory 3.5mm auxiliary input (AUX-IN) jack.

AX-Series Radio Replacement Interfaces for Ford

Two interfaces for Ford vehicles will be at CES. Both provide high level speaker input. The AX-FD1-SWC is for Ford models from 2007 and up*, and can be used in non-amplified, amplified, and Sony/THX amplified systems. The AX-FD2-SWC is for Ford models from 2011 and up*.

AX-Series Radio Replacement Interfaces for GM

            Axxess will reintroduce four solutions for GM vehicles that retain chimes, OnStar and OEM Bluetooth®. All four interfaces support adjustable volume for OnStar in addition to providing NAV outputs for parking brake, reverse, mute and speed sense. Additional features and specifications vary between the interfaces:

AX-GMCL2-SWC is for GM vehicles from 2000 to 2013

AX-GMLAN11-SWC is for GM vehicles from 2006 to 2012

AX-GMLAN29-SWC is for GM vehicles from 2006 and up*

AX-GMLAN44-SWC is for GM vehicles from 2011 and up*

Visit AxxessInterfaces.com or reference the Axxess New Product Guide to see additional information for each part.

AX-Series Radio Replacement Interfaces for Hyundai/Kia

            Two new AX-Series interfaces for Hyundai/Kia vehicles will be available from Axxess, both which work with non-amplified systems, or amplified systems when used with the AX-HYKIA-SPDIF. The AX-HYKIA1-SWC is for Hyundai/Kia 2012 and up* models and the AX-HYKIA2-SWC is for 2013 and up* models.

AX-Series Radio Replacement Interface for Mazda

            The AX-MAZ1-SWC is for Mazda vehicles from 2007 to 2015. It retains the balance and fade controls and also retains the ability to change the clock with a service harness. It can be used with either amplified or non-amplified systems.

AX-Series Radio Replacement Interface for Toyota/Lexus

            The AX-TYAMP1-SWC is designed for amplified systems for Toyota and Lexus models from 2002 to 2015. The AX-TYAMP2-SWC is designed for JBL amplified systems for Toyota and Lexus vehicles from 2012 and up*. Both interfaces retain balance control.

*Visit AxxessInterfaces.com to up-to-date, vehicle specific applications and additional instructions and specifications for the improved AX-Series. See all of the new products from Metra’s 12 volt brands at CES booth #5211 in the North Hall. CES is held January 9 - 12 at the Las Vegas Convention Center.

1-2-2018 -- The two new Massive Audio “BOA” subwoofers offer no “Restrictions” designed for audio fanatics that keep listening for something better than the ordinary. 

The BOA151N 15 Inch ‘SPL’ subwoofer uses a low mass 3” High Temperature BACCAR Dual 1 Ohm, 6 layered Copper & Aluminum Flat Wire Voice Coil that’s bonded to a Kevlar Fiber Enhanced Non-Press Cone. The custom computer designed low mass woven fiberglass dust cap reinforces the cone and helps prevent cone “flex” when pressured under maximum conditions. The long throw EROM Foam surround is controlled by 12 high intensity NbFeB High Powered Neodymium Magnets that encircle the coil. The surround is heat bonded to the cone and frame and floats on precision laser cut mirror image triple poly cotton black spiders. This helps balance and control the linear excursion that’s needed to produce high acoustic output without losing cone control. The RMS power range is CTA 2006 compliant at 4,000w - 6,000 Watts with a staggering 8,000 peek power for momentary frequency bursts. 

The BOA151 15 Inch ‘Low Frequency / Sound Quality’ Subwoofer uses a 4” Dual 1 Ohm, 4 Layer Round Wound CCAW voice coil with a Conex 6pc damper that’s bonded to a Kevlar Fiber Enhanced Non-Press Cone. A low resonance aluminum die cast basket holds all its components in place assuring no mechanical resonance interfere with playback. To help control the precise magnet gap needed in the voice coil, to extend extreme linier power strokes, it utilizes four stacked 500oz Ferrite 250 x 140 x 20mm Y35 Magnets that are kept cool by a 240 x 32mm T-Yoke with a Black Anodized Finish. This helps maintain a safe voice coil operational temperature. The RMS power range is CTA 2006 compliant at 4,000w - 6,000 Watts.

BOA151 FEATURES:

• 4" Four-Layer round CCAW Ohm Voice Coils
• Dual 1 Ohm Impedance
• Die Cast Basket with Black Textured Finish
• Kevlar Fiber Enhanced Non-Pressed Paper Cone with Textured Black Paint Finish
• EROM Foam Surround with Red Stitching
• Fiberglass Woven Dust Cap
• Direct Cooling Design T-yoke with Black Anodized Finish
• Triple Black Poly Cotton Spiders with Mirror Image Layout
• 10 Gauge Power Cable with Direct Lead Connection
• Magnet: Y35 ~ 250*140*20mm X 4pc, 500oz
• Washer: 240*32mm
• T-yoke: 240*32mm

BOA151N FEATURES:

• Ultra High Powered Neodymium Magnets
• 3" BACCAR  Dual 1 ohm
• 6 layers Copper & Aluminum flat wire
• Die Cast Basket with Black Textured Finish
• Kevlar Fiber Enhanced Non-Pressed Paper Cone
• Textured Black Paint Finish
• EROM Foam Surround with Red Stitching
• Dual 1 Ohm Impedance
• Fiberglass Woven Dust Cap
• Direct Cooling Design T-yoke with Black Anodized Finish
• Triple Black Poly Cotton Spiders with Mirror Image Layout
• 10 Gauge Power Cable with Direct Lead Connection
• Magnet: NdFeB ~ 50X40X20 N52H (12pcs)
• Washer: 200*24mm
• T-yoke: 200*20mm

For more information please contact Massive Audio: This email address is being protected from spambots. You need JavaScript enabled to view it. or visit our Website: http://www.massiveaudio.com

12-28-2017 Mobile Electronics -- With the new year just around the corner, there are plenty of things worth remembering about 2017. Among them are stories about the people that help make the 12-volt industry so great. Here are the top three most read articles of 2017:

1. May 2017 Bird of Prey – Osprey Boston Truck & Van : https://issuu.com/mobileelectronics/docs/17me_may_for_digital/30

2. October 2017 Partner for All – Automotive Data Systems: https://issuu.com/mobileelectronics/docs/17me_october_new/40

3. April 2017 Rebel Monarchy – KingPin Car & Marine Audio:  https://issuu.com/mobileelectronics/docs/17me_april_for_digital/28 

12-28-2017, STILLWATER, USA – KICKER® has developed and perfected two revolutionary marine tower products:  the KMTC11 and KMTC9 Horn-Loaded Systems. These massive enclosure pairs, available in white or charcoal, will be unveiled during CES 2018 and available for purchase at Authorized KICKER Dealers in-store and online by second-quarter 2018. KMTC Systems will also be available at www.kicker.com.

Designed to generate concert-level volume with exceptional clarity, these oversized 11- and 9-inch, horn-loaded drivers utilize a proprietary Tractrix® compression-horn design with a titanium-dome tweeter. Listeners hear incredibly smooth sound up-close or at a distance, without the harsh “glare” commonly associated with an inferior design. Included in the speaker is a selectable 12dB crossover, which allows dialing in the tweeter attenuation by removing the rear plate. The embossed back plate can also be rotated to match the desired orientation.

The woofer features an aluminum basket and UV-treated polypropylene cone, which is co-molded to a Santoprene® surround for added durability and sound quality. The result is a speaker that delivers concert levels of volume, without harshness or distortion. It is a highly durable speaker that is made to last for years in salt and fresh water.

The thick, ABS plastic enclosures utilize an integrated UV-resistant inhibitor that allows them to maintain original color over years of use on the lake or the ocean. In fact, every KMTC driver meets or exceeds ASTM industry standards for humidity* and UV exposure**.

Matching acoustic performance with an extraordinary level of convenience, KICKER engineered a revolutionary way to mount the KMTC. Made of 316L stainless-steel and ABS, the innovative clamp design fits a wide range of tube sizes, anything from 1-1/2 to 3-1/4 inches without additional inserts, and mounts vertically or horizontally with ease. The through-clamp wiring design and integrated speaker/LED connectors create a clean look without the need for binding posts.

The clamp’s locking cam/toggle system enables a 359˚ swiveling design for easy rotation of the speaker without tools – an industry first. The clamp also houses all midrange, horn and LED wires in a single, convenient location.  This specialized mating socket is used to join the wires to the speaker, and also allows for easy installation, removal and re-attachment of the speaker with a single Allen wrench at the end of the cruise, without removing a single wire from the speaker. The included mounting hardware for the speaker is also forged from rustproof, 316L stainless steel.

The KMTC also comes with matching LED grilles. Seven vibrant LED colors let the listener match the speaker lighting to a boat’s theme, or upgrade to 20 colors and 19 lighting modes with the optional KMLC LED remote controller (sold separately).

*ASTM B117 200 hr. Salt Fog Test

**ASTM G154 400 hr. Accelerated UV Test

KICKER KMTC Marine HLCD Tower Systems Specifications

Model                                                           KMTC11               KMTC9

Woofers (in, cm)                                         11, 28                    9, 23

Horn Driver (in, cm)                                    1, 25                      1, 25

Horn Driver Type                                        titanium dome      titanium dome

Horn Style                                                    Tractrix                 Tractrix

Impedance (Ohms)                                     4                            4

Max Rec Amplifier Power (watts peak)      600                        600                     

Max Rec Amplifier Power (watts RMS)      300                        300                     

Sensitivity (dB 1w/1m)                                93                          92                       

Frequency Response (Hz)                         20-20k                   20-20k                

High Pass (dB), at Frequency (Hz)            12dB @2.5kHz     12dB @2.5kHz

Low Pass (dB), at Frequency (Hz)             12dB @2.5kHz     12dB @2.5kHz

High Freq. Attenuation                               0 or +3dB              0 or +3dB

Height from bottom of roll bar (in, cm)      13-5/8, 34.6           11-9/16, 29.4

Diameter (in, cm)                                         11-7/8, 30.2           9-13/16, 24.9

Depth (in, cm)                                              12-11/16, 32.3       10-7/8, 27.7

LED Grilles                                                   Yes                        Yes                     

ASTM B117 Salt/Fog Certified                    Yes                        Yes

ASTM G154 Ultraviolet Exposure Certified                             Yes      Yes

December, 2017 -- Henderson, NV – Retro Manufacturing has awarded Crutchfield with the Dealer of the Decade award for 10 years of commitment and sales growth. 

"It gives me great pleasure to announce that Crutchfield has been chosen as our Dealer of the Decade – a period spanning 2007 to 2017," said Steve Harrington, President of Retro Manufacturing. "During this time, Retro Manufacturing has experienced tremendous growth from our humble beginnings until now.  Crutchfield has been a very important part of this success."

"We looked at many aspects when making our selection; including sales across categories, commitment to keeping current with our models and finally a knowledge of our products. I am extremely pleased with how Crutchfield has taken the time to learn about the classic car category."

"This unique award is our way of recognizing the entire staff at Crutchfield for their hard work and exceptional sales effort. We wanted to do something extremely special – something that stands out from everyone else – so we had an acclaimed artist create a hand-drawn piece of art to show how much we appreciate Crutchfield's commitment to business."

For more information, visit www.crutchfield.com and www.retromanfucturing.com.

STILLWATER, USA – KICKER® has developed the KMA-Series of marine amplifiers, made to be as versatile as they are affordable. These four new amplifiers will be unveiled during CES 2018 and will be available at Authorized KICKER Dealers in-store and online by early first-quarter 2018. KMA-Series Amps will also be available for purchase at www.kicker.com.

Every KMA-Series Amp (KMA150.2 stereo; KMA300.4 4-channel; KMA450.6 6-channel; KMA600.1 mono) comes with marine-grade speaker terminals, stainless-steel hardware, conformal-coated circuit boards and ABYC/NMMA/NMEA-compliant power connections. The amplifiers are also equipped with the KickEQ™ variable, 12dB bass boost, as well as a 12dB crossover.

Specifically with boat owners in mind, KICKER created the KMA450.6 6-Channel Amp to power up to three independent full-range boat zones simultaneously. This six-channel, 450-watt amp provides an easy way to get the perfect volume levels on the deck, in the water, or inside the cabin at the same time. Boaters can control the volume of one zone with the receiver, and then the second zone can be dictated with the included remote level controller, which can be mounted on (or under) nearly any flat surface.

Additionally, the KMA600.1 Mono Amplifier comes with a remote level controller for increasing volume from anywhere on the boat. The subwoofer amp also includes a 24dB subsonic filter ensuring efficient subwoofer performance by actively filtering out damaging ultra-low frequencies during playback.

KICKER Performance Audio products, a division of Stillwater Designs and Audio, Inc.®, are available for the mobile and home audio aftermarket at authorized retailers worldwide, and also as Original Equipment for automobile manufacturers. Consumers seeking more information on KICKER or Livin’ Loud® may call the Consumer Information Line at 1-800-256-5425 or visit the brand website at www.kicker.com. Follow KICKER socially at Facebook.com/kickeraudio, Twitter.com/kickeraudio, Instagram.com/kickeraudio, or Pinterest.com/kickeraudio.

KICKER KMA-Series Marine Amplifiers Specifications

Mono/Stereo/Multi-Channel Models (at 14.4V)                         KMA600.1       KMA450.6       KMA150.2       KMA300.4                                             

Power (watts/ch) 2 Ohm Stereo:                          -                       75 x 6              75 x 2              75 x 4                             

Power (watts/ch) 4 Ohm Stereo:                          -                       40 x 6              40 x 2              40 x 4

Power (watts/ch) 4 Ohm Mono Bridged:             -                       150 x 3            150 x 1            150 x 2

Power (watts/ch) 2 Ohm Mono Sub Ch:              600 x 1            -                       -                       -

Power (watts/ch) 4 Ohm Mono Sub Ch:              300 x 1            -                       -                       -

Frequency Response (Hz):                                  25-200             10-20k             10-20k             10-20k            

Remote Level Controller Included:                      yes                  yes                  -                       -
Dimensions (in, cm):

    (all models 2-5/16”H x 7-1/8”W x …”L,            8-1/16,             13-15/16,         8-1/16,             12-7/16,

    5.9cmH x 18cmW x …cmL):                              20.5                 35.3                 20.4                 31.5

Common to all Models

Input Sensitivity:  High Level 250mV-10V, Low Level 125mV-5V

Signal to Noise Ratio:  >95dB, a-weighted, re: rated power

Active Crossover (KMA.2/KMA.4):  12dB/octave, variable 50-200Hz, HP, LP or all pass

Active Crossover (KMA.6):  (Amp 1 and 2) 12dB/octave, 0-200Hz, HP only; (Amp 3) 12dB/octave, variable 25-200Hz, HP, LP or all pass

Active Crossover (KMA.1):  12dB/octave, variable 50-200Hz, LP only

Subsonic Filter (KMA.1/KMA.6 amp 3 only):  24dB/octave HP fixed at 25Hz

KickEQ+™ Bass Boost (all models/KMA.6 amp 3 only):  variable to+12dB, centered at 40Hz 

Holly Hill, FL - December 27, 2017 – iBeam Vehicle Safety Systems® by Metra Electronics® will debut a new Foot Control Automatic Trunk Opener at CES 2018. The TE-ATO is a universal, aftermarket solution that works with any vehicle equipped with a power liftgate.

Once the two sensors are installed, the trunk can be opened hands free by a simple kick action near the vehicle. This versatile trunk opener is integrated for positive trigger systems (common on GM vehicles), negative trigger systems (common on Ford and imports), or it can be connected directly to the trunk switch.

“The 2-sensor detection design allows the trunk to open with a little kick near the rear bumper,” says Jon Osborne, product director for iBeam Vehicle Safety Systems at Metra Electronics. “This added convenience will make daily tasks much easier for loading up the trunk - especially when your hands are full,” Osborne added. It is recommended for vehicles also equipped with proximity key unlock for a fully hands free experience.

This product is currently in stock and shipping. See the TE-ATO, along with more than 50 new safety products for 2018, on display at the Metra Electronics CES booth #5211 in the North Hall. CES is held January 9 - 12, 2018 in the Las Vegas Convention Center. Learn more about iBeam Vehicle Safety Systems at iBeamUSA.com. 

Clearwater, FL (December 27, 2017) -- Blind spots are one of the leading causes of preventable auto accidents around the country. It’s been estimated around 840,000 accidents are caused by blind spot-related issues every single year, leading to thousands of injuries and hundreds of deaths.

By providing drivers with a simple, easy-to-use aftermarket blind spot detection system, EchoMasterprovides additional visibility opportunities to larger vehicles.

The latest in EchoMaster’s line of advanced aftermarket safety technologies is the comprehensive integrated blind spot detection and lane change assistance system for Ford F-150 trucks.

Available in two options: FCTP-FD1501 works with a F-150’s OE radio.  FCTP-FD1504 was engineered to work with any aftermarket monitor that has an RCA video input. Built to integrate seamlessly into Ford F-150 trucks, these kits provide extra functionality, without added complication.

The camera solutions effectively assist in safe lane changes and eliminate blind spots, protecting your truck, passengers, and other assets from potential liabilities, without adding bulk to the truck’s exterior.

The primary technology used in both systems is the EchoMaster’s side blind spot and lane change assist system.  The proprietary designed mirror cap inserts with integrated cameras are responsive to driver behavior; the camera view is triggered on using the turn signals, eliminating side blind spots. The FCTP-FD1501 includes everything needed for a plug-and-play installation including camera harnesses, adapters and interface module. The FCTP-FD1504 includes the camera harnesses, adapters and video switcher for universal applications.

For more information regarding Integrated Safety Solutions, contact your EchoMaster sales representative. If you are interested in becoming an Authorized EchoMaster dealer, visit our contact page to reach AAMP Global. 

December 26, 2017 - VAIS Technology has released two new satellite radio integrated solutions specifically designed for 2018 Honda Accord Sport and 2018 Ford F150 Sync 3 models. This solution allows owners of Honda Accord Sport and Ford F150 vehicles, 4.2” LCD screen to add SiriusXM® satellite radio to their existing factory stereo, without compromising any functionality.

“Since 2003, VAIS Technology has been developing satellite radio adapters for vehicles that aren’t equipped from the factory with SiriusXM® tuners,” Dennis Hopper, Vice President of Sales, says. “While satellite radio is more popular than ever, many new vehicles still don’t come equipped from the factory with satellite tuners. Our company develops simple, easy to install integrated solutions that add satellite radio but preserve factory functionality.”

The new GSR-027 integration kit provides coverage for the 2018 Honda Accord Sport. The new GSR-042 provides coverage for the 2018 Ford F150, w/ 4.2” LCD screen (Sync 3 infotainment systems). Both models can be flashed using the GSR-U01 Universal integrated solution.

These adapters connect directly to the original Honda and Ford factory stereos and allow the vehicle owner to listen to satellite radio through the existing factory stereo system. The VAIS integrated adapter kit also allows for full control of satellite radio functions - changing stations, setting presets, etc. - with the standard factory radio controls.

“We design our satellite radio adapters to seamlessly operate just like factory satellite radio systems,” Hopper explains. “While it takes more work on our part, our customers really appreciate the fact that they can control their satellite radio just like they would regular FM radio - the same knobs and buttons, the same steering wheel controls, etc. That’s what really separates VAIS products from the rest of the industry.”
To learn more about the new GSR-027, GSR-042 and GSR-U01 from VAIS Technology, visit http://www.vaistech.com

ADAS supplier ships large screen head unit upgrades for Toyota and Honda...

December 26, 2017... Houston, TX -- DriveAssist Technologies, premier supplier of safety and convenience products for the automotive aftermarket, announced it will begin to ship its initial Connected Car solutions to select Retailers and Expeditors in the US and Canada. 

Honda CVR with Factory Head Unit Honda CVR with Connected Car Head Unit

"Our Connected Car head units are designed to replace the standard small screen factory radios in various Toyota & Honda vehicles while maintaining the factory appearance and retaining all factory settings such as steering wheel controls and factory camera said Bob Goodman, Vice President of Sales & Marketing. "All units feature a 9" or 10" Touch Screen, built-in Navigation w iGo Primo™ mapping, easy Smartphone connection for iPhone and Android devices with Android Auto™ and Car Play™, built in WiFi, phone mirroring, and Bluetooth with audio streaming. Also included is a wireless controller, similar to those found on BMW, Audi and manyluxury vehicles.

This is the ideal solution for 12 volt specialists and expeditors with customers requesting infotainment options not available in older or lower trim level vehicles", added Goodman. Current applications include Honda & Toyota 2013 - 2018 model year vehicles and will be available at select Retailers beginning in January with an MSRP of $1,199.00. To accommodate our resale partners we will offer an aggressive Freight Policy including deeply discounted "Expedited Shipping". All DriveAssist products have a Lifetime Warranty. "ADAS" Advanced Driver Assistance Systems is the fastest growing category in the Automotive Aftermarket industry. DriveAssist's parent company Cybcar America brings 10 plus years of history supplying leading edge products that seamlessly integrate into the vehicles design. markets and we already have commitments from many high profile 12 volt specialists and expeditors in the United States and Canada", says Goodman.

12-26-2017 -- At CES 2018, AudioControl will be showcasing a complete lineup of car audio products designed for ultimate performance aftermarket systems of any size or for systems based upon the factory head unit (OEM integration).

Those interested can visit AudioControl at CES North Hall, Booth 5016. 

For booth appointments, press materials, artwork, review samples please contact Micah Sheveloff @ WIRC Media (727) 258-4770 / This email address is being protected from spambots. You need JavaScript enabled to view it..

CLEARWATER, FL – (December 19, 2017) PAC, a Power Brand of AAMP Global, will exhibit their latest products at the upcoming CES 2018 in Las Vegas on January 9-12.

PAC informs that their AmpPRO product line will be featured at CES 2018. This factory sound system upgrade solution has allowed many PAC customers to dramatically improve the sound in vehicles while retaining the factory radio fit, finish, and features. Ford, Toyota, GM MOST, and Chrysler AmpPRO solutions will be displayed in the AAMP Global booth, number 5220.

PAC has chosen to display their two Toyota solutions for the first time at CES. One of these products is expected to be launched by the end of the year and the other will be introduced in the first quarter of 2018. An AmpPRO GM MOST solution, another product expected to be launched in 2018, will also be showcased at CES 2018. AmpPRO Ford solutions cover a broad range of vehicles for Ford with Sony and Lincoln with THX. At the CES, PAC plans to introduce a speaker connection harness for these vehicles to simplify the installation process. Amongst the existing products, PAC will also exhibit their existing Chrysler solutions. 

Some other PAC solutions to be seen at CES 2018 include

• Safety integration solutions, which enable an installer to add safety cameras for collision avoidance
• RadioPRO Advance – PAC’s next generation of radio replacement solutions that saves even more time with more features
• New high-quality dash kit solutions

“We will be introducing 5 new dash panels at CES. A large double DIN panel for 1999-2002 GM trucks and SUV’s that has a factory like texture. Also 4 double DIN panels for the 2005-2007 Chrysler 300 and Dodge 2006-07 Charger/2005-07 Magnum available in Black and Silver, they are the only panels available on the market that trim out the radio and do not use a dash kit” says Sam Hunt, the Product Manager of Integration Products.

In addition to PAC, AAMP Global will also exhibit their Autoleads, EchoMaster, iSimple, Phoenix Gold, and Stinger brands at CES 2018 in booth number 5220. 

DriveAssist Does The Heavy Lifting ADAS supplier readies Lift-EZ Power Liftgate Systems. 

December 14, 2017... Houston, TX -- DriveAssist Technologies, premier supplier of safety and convenience products for the automotive aftermarket, announced it will begin to ship its initial Power Liftgate solutions to select Retailers and Expeditors in the US and Canada. Initial applications available include various Toyota models and the Tesla Model S.

Lift-EZ Power Liftgate System
DriveAssist presents the latest in vehicle convenience options, Lift - EZ™. Lift - EZ™ adds the convenience of a power assisted Liftgate system seamlessly and without altering the vehicle", says Bob Goodman, Vice President of Sales & Marketing for DriveAssist. Typically, this feature has only been available in the highest trim levels or in the most expensive vehicles, DriveAssist will offer a wide selection of Lift - EZ™ systems for many popular vehicles. Our system integrates with the vehicles keyless entry system and may be operated multiple ways. Lift-Ez™ kits also feature adjustable height settings plus built in protection when opening or closing. Installation is "plug & play" and each vehicle specific kit includes all required hardware. Exclusive to Lift-EZ is our Soft Close latch feature™ that insures a proper seal when closing.

Lift-EZ Press 121417
Lift-EZ with Factory Key FOB

Operation can be accomplished using the factory key fob, cargo area or cabin mounted switch. Additionally, an option for hands free operation using foot swipe gesture is available. To insure safe operation "Smart Close" prevents opening or closing when persons or obstacles are present. To accommodate our resale partners we will offer an aggressive Freight Policy including deeply discounted expedited shipping and all DriveAssist Products include a Lifetime Warranty.
Vehicle Safety and Driver Assistance is the fastest growing category in the Automotive Aftermarket industry. DriveAssist's parent company Cybcar America brings 10 plus years of history supplying leading edge products that seamlessly integrate into the vehicles design. markets and we have began discussions with high profile 12 volt specialists and expeditors in the United States and Canada", says Goodman
Lift-EZ Systems are available now and have an MSRP of $1099.95.

New Pro Commercial DVRs from iBeam Vehicle Safety Systems® will Debut at 2018 CES

Holly Hill, FL - December 18, 2017 – iBeam Vehicle Safety Systems® by Metra Electronics® is expanding their Pro Commercial line with two new DVRs, launching at 2018 CES. Fleet owners can record and store potentially vital video footage related to traffic collisions or other incidents, from up to four channels simultaneously.  iBeam’s TE-CDVR-4 and TE-CDVR-G DVRs are designed for commercial use, with the microSD card concealed behind a key-locked security door to prevent tampering with video evidence. The DVRs support up to a 256GB microSD card and video files can also be backed up via USB, offering a secure solution for fleet owners.

The TE-CDVR-G has a built-in GPS feature, which provides a location stamp on the video feed to ensure a comprehensive account of the vehicle whereabouts. It works with camera resolutions up to 720p. Both DVRs include 4 Pin DIN inputs for four camera feeds and video output for setup and video playback. iBeam’s 16GB MicroSD card, the TE-16SD, is sold separately.

See both of these new DVRs on display at the Metra Electronics CES booth #5211 in the North Hall, from January 9 - 12, 2018 in the Las Vegas Convention Center. Learn more about iBeam Vehicle Safety Systems at iBeamUSA.com. 

Holly Hill, FL - December 14, 2017 – iBeam Vehicle Safety Systems® by Metra Electronics® is introducing a new 360 degree 3D view camera system at 2018 CES. This 3D camera system, the TE-360-3D, is a step up from their latest 360 degree camera system, the TE-360, with its new virtual 3D view feature. This feature allows the driver to see different angles of their vehicle at a bird’s eye view for ultimate visibility.

Four cameras mount to each side of the car and are custom calibrated by the installer for image fusion. The innovative control processor blends the feeds into one seamless 360 degree panoramic view. An additional virtual 3D view on the right shows the vehicle from an overhead perspective, allowing the user to pan in their desired direction. This added 3D feature gives the driver complete coverage, with an aerial view of the vehicle similar to what you’d experience in a video game or virtual reality.

Integrated turn and reverse triggers provide instantaneous displays of side or rear camera feeds when changing lanes, parking or reversing. This cutting-edge system provides an unobstructed view of vehicle surroundings, while recording all four channels simultaneously. Drivers can also toggle through multiple camera views for maximum guidance. For security surveillance purposes, the camera system can also record while the vehicle is parked.

The TE-360-3D uses tape (included with the system) for fast calibration. The tape is placed on the floor around the vehicle for an easy and more precise calibration method. SD cards (TE-16SD) are sold separately. See this exciting new technology at the Metra Electronics CES booth #5211 in Las Vegas, from January 9 - 12, 2018.

Miramar, FL—December 13, 2017—JL Audio, an innovator in high-end audio solutions, has partnered with AVIDWORX Productions to create a series of dedicated in-store displays for authorized dealers to showcase and demonstrate JL Audio’s automotive, powersports and marine audio products.

AVIDWORX has integrated switching capabilities into the displays which are available in three different configurations: The JL Audio Extreme (shown below), The M3-7 Sound Stage, the M3-5 Sound Stage, and the M3-3 Sound Stage.  More information on the displays and program are available at www.avidworx.com/jl-audio

 “We are excited to be able to offer this program to our customers, and to work with one of the most innovative brands in the industry,” said Marcel Newell, president of AVIDWORX. “We know customers are going to love the educational and interactive experience, and that retailers will appreciate a modular approach that makes it easy to update the showcase over time.”

Carl Kennedy, V.P. of Sales for JL Audio said, “The most important part of any emotional purchase is the demonstration experience.” Carl continued, “Attractive, high-performance displays like these great new designs from AVIDWORX do precisely this. By partnering with AVIDWORX, we are able to bring this great resource to our retail partners to help them – Sell Great Audio.”

Clearwater, FL (December 4, 2017) – Today, Phoenix Gold, manufacturer of high end car audio components, announced the release of its enhanced line of Ti3 amplifiers. With this launch, the Ti series will take its place at the top of the Phoenix Gold range, as the preeminent audiophile-class amplifiers, powering studio quality car audio systems. True Full Range Class D and flexibility with Strappable or Linkable Monoblocks; the Ti3 line is the beginning of a new legend in mobile audio reproduction. Stunning chassis design with integrated control panels, illuminated Tri-light status display and end panel connections all add to the breathtaking design and attention to detail Phoenix Gold has applied to this new series of amplifiers. Encompassing a line of monoblocks, 4-channel and 6-channel amplifiers Ti3 offers the right amplifier for any system where pure sound reproduction and effortless power delivery are the objectives.

“Following the huge success of the introduction of the new SX2 line of amplifiers, we are thrilled to deliver an enhanced, premium range of amplifiers to Phoenix Gold with Ti3,” explained Kevin Kuenzie, head of Phoenix Gold product development. “These amplifiers are ushering in a new era for Phoenix Gold, with bold designs with an old school flavor combined with cutting edge features, system flexibility plus lots and lots of power. If the SX2 is any indication of what to expect; our production, purchasing and sales departments are going to be very busy keeping up with demand!”

The full line of Ti3 amplifiers feature Phoenix Gold innovative and proprietary technologies: Power Shift and Bass Shift. Power Shift allows you to direct power where it is needed. Active system design has never been easier. Why waste output power when it can be redirected to the channels that can better utilize it. Insane amplifier efficiencies and output are achieved with Power Shift. A Precision Signal Control Center with 24dB Linkwitz-Riley crossovers for precise frequency control, matched input level for (Phase) compensation of vehicle acoustics and subwoofer placement, and 24dB adjustable subsonic filter to optimize speaker and enclosure efficiency. Bass Shift can be adjusted from the listening position via the included controller.

Available now from Authorized Phoenix Gold dealers, the revolutionary Ti3 lineup includes:

Ti3 1300.1

1300W Monoblock Amplifier

Full range capable Class-D Topology

Power Rating: 1300 x 1 @ 1 ohm | 1000 x 1 @ 2 ohm | 750 x 1 @ 4 ohm

Ti3 1200.4      

1200W 4 Channel Amplifier

Full range capable Class-D Topology

Power Rating Standard Mode:  300 x 4 @ 2 ohm | 225 x 4 @ 4 ohm | 600 x 2 @ 4 ohm bridged

Power Rating Power Shift Active:  ch1&2 200 x 2 + ch 3&4 400 x 2 @ 2 ohm | ch1&2 150 x 2 + ch 3&4 300 x 2 @ 4 ohm

Power Rating Power Shift Active – 3ch mode:  200 x 2 @ 2 ohm + 800 x 1 @ 4 ohm | 150 x 2 @ 1 ohm + 800 x 1 @ 4 ohm                 

City of Industry, CA. 12/01/2017 -- Cadence Sound has announced the QSA-PR88 Double 8-inch Compact Bass Enclosure 1+1 System. The QSA-PR88 units can be mounted under the front seats of today’s smaller vehicles or in the trunk area and deliver that extra cleaner and deeper bass that factory systems cannot reproduce.

The Package includes 1-8-inch Active unit and 1-8-inch Passive unit that you connect to the Active unit with a simple 1 wire installation. MSRP for the QSA-PR88 is $699.99.
• MosFET PWM (Pulse Width Modulated) Power Supply
• Thermal, Overload, and Speaker Short Protection
• Auto Power On
• Soft Turn-On Circuitry
• Remote Turn-On / Turn-Off Circuitry
• Variable Input Gain Control
• Variable Low Pass Crossover
• Variable Bass Boost
• Variable Phase Shift
• RCA Low Level Inputs
• High Level Input
• LED Power and Protection Indicators
• Remote Subwoofer Level Control
• Dimensions: 11.4”x 9.6”x 2.8” each unit.
For Additional information contact Cadence at (626) 465-3383 or visit www.cadencesound.com