Mobile Electronics Magazine

Switch to desktop

Holly Hill, Fla. – February 22, 2023 –iBEAM Vehicle Safety Systems by Metra Electronics® is now shipping new safety and surveillance solutions that debuted at the SEMA show in November. These new products include a 9" Live View Streaming Rearview Mirror, a 4K Dual-View Dash Camera With DVR, a Universal Hardwire USB, and a variety of vehicle-specific Rearview Mirror T-Harnesses. These items are designed to increase safety for an assortment of vehicles and are easy to install.

9" Live View Streaming Rearview Mirror

The TE-LVM9 from iBEAM provides full protection for the area surrounding the rear of a vehicle. This monitor can display a live stream of the rear camera when driving so that the driver has a clear view of what is behind their vehicle on the road. It can also display a standard reflective mirror, and when the driver switches the vehicle into reverse, the built-in 9" monitor will automatically switch to the rear camera to provide guidance when reversing. A G-sensor triggers the camera to begin recording if it detects an impact, so the vehicle is even protected when parked. A memory card (not included) of up to 64GB is supported so that video recordings can be saved and any accidents or incidents behind the vehicle are documented. This product is ideal for trucks, vans, RVs, and other large vehicles with rear blind spots.

4K Dual-View Dash Camera With DVR

iBEAM's TE-DVR-DL4K captures and displays a 140° wide-angle field of view to protect drivers from liability and increase safety. It quickly and easily mounts on the windshield to view and record the area in front of and inside a vehicle. One lens can be directed toward the front windshield to view what is ahead of the vehicle, and one toward the vehicle's interior, or out the rear window to capture the view directly behind the vehicle. Both angles can be displayed simultaneously on the built-in 3-inch viewing screen that sits atop the two camera lenses. The front dash camera features 4K HD recording, the interior camera features 1080p recording including audio which can be stored on a micro memory card of up to 128 GB (not included).

Universal Hardwire USB

The TE-UNIV-USB is an innovative solution that allows installers to conveniently and safely connect and power a vehicle camera or any other USB device. It connects directly to a vehicle's 12-volt power source to provide an alternative to the factory auxiliary power outlet.

Rearview Mirror T-Harnesses

iBEAM has also begun shipping plug-n-play rearview mirror T-harnesses that make connecting a vehicle safety and security camera, DVR, Dash cam, speed detection device or other accessory powered by a USB input easy without cutting your vehicle's factory wiring. These vehicle-specific T-harnesses include a 2-amp, 5-volt USB, which accommodates both USB "A" to Mini "A" and USB "A" to Micro "B" connections. Also included are 6" extension cables for easy installation. Vehicle applications for these new TE-MTH Series T-harnesses include:

  • Toyota 2014-2022 and Lexus 2010-2022
  • Nissan 2005-2022 and Infiniti 2014-2021
  • Dodge 2014-2022, Jeep 2014-2022, and RAM 2014-2022
  • Acura 2004-2018 and Honda 2010-2021
  • Nissan 2005-2022 and Infiniti 2014-2021
  • Ford 2012-2022
  • Toyota 2014-2022, Honda 2016-2022, and Subaru 2016-2022
  • Mazda CX5 2017-2021 and Mazda CX9 2016-2021 with frameless mirrors

            Visit MetraOnline.com for up-to-date vehicle-specific applications.

These new products are in stock and shipping now. Visit iBEAMusa.com for more details.

At Metra, 12-volt installation and integration is our passion. We strive to continuously offer the highest quality products to meet the fluctuating technological challenges of the automotive world. We actively listen to our customers’ requests and invest resources in developing the highest quality dash kit and harness solutions. We make dash kits for more vehicle applications than anyone else in the world. That’s why we’ve been known as “The Installer’s Choice” ® for 75+ years. Our other brands include: Axxess®, T-SPEC®, The Install Bay®, Heise LED Lighting Systems®, iBEAM Vehicle Safety Systems®, Shuriken High Performance Batteries®, Raptor®, Ballistic®, AmmoTenna®, Metra PowerSports®, Saddle Tramp®, Metra Marine®, and Daytona Lights®. For ordering information and pricing, visit Metra Electronics online at MetraOnline.com or call 386-257-2956.

Holly Hill, FL – October 25, 2023 –iBEAM Vehicle Safety Systems by Metra Electronics® will display new safety and surveillance solutions at the 2023 SEMA show, October 31 to November 3 at the Las Vegas Convention Center. On display will be an adjustable spare tire camera kit, a universal multi-mount camera system, and a window-mounted 2K DVR. These products are designed to increase safety for a wide assortment of vehicles. Metra's main SEMA Show booth will be #10539 in the North Hall of the LVCC, and its off-roading and powersports products will be on display at booth #60031 in the West Hall.

Adjustable Spare Tire Camera Kit

Show attendees will have the opportunity to see the new TE-ASTCAM, an adjustable spare tire camera kit designed to provide drivers with a clear view of their surroundings while parking or reversing. The kit includes a multi-adjustable bracket, high-quality camera, and wiring to ensure a hassle-free installation. The versatile bracket of the TE-ASTCAM is specifically designed to mount securely to the factory studs of the spare wheel with over 200 vehicle applications. It offers an impressive range of adjustability, allowing drivers to position the camera exactly where they need it. The bracket's camera stem can be adjusted both side-to-side and up-and-down, providing drivers with optimal flexibility and customization options. Additionally, the head of the bracket is bendable to achieve the perfect angle adjustment for each vehicle.

Equipped with high-quality metal housing, the included camera delivers durability and longevity. Its 170-degree field of diagonal view ensures a wide coverage area, minimizing blind spots and providing a comprehensive perspective of the vehicle's surroundings. The camera also features parking guidelines, enabling drivers to accurately gauge distances and maneuver their vehicle with ease. With an IP67 rating, this camera is designed to withstand inclement weather, ensuring reliable performance even in challenging environments. Additionally, the TE-ASTCAM boasts excellent low-light capabilities with its 0.6 LUX night vision, allowing drivers to navigate safely in dimly lit areas or during nighttime parking.

Universal Multi-Mount Camera System

The TE-5MSC universal multi-mount camera system allows installers to choose the most suitable camera installation method, location, and viewing angle for their vehicle. This multi-mount safety and security camera system is a high-quality eyeball camera with five mounting options: a license plate bracket, rubber mount, angle mount, square mount, and flush mount for unmatched versatility. The TE-5MSC delivers exceptional image quality with the camera's PC7070D 1/4 CMOS sensor and an impressive pixel resolution to ensure sharp visuals. This durable camera is rated IP68 to withstand harsh environments and operates reliably in a wide range of temperatures. Its DC power source features a minimum requirement of 6V and a maximum of 16V, allowing for flexible powering options and easy integration with existing systems. With conservative power consumption and a low current draw, this camera ensures minimal power usage while providing superior performance. Drivers can switch between the video image and reverse image display to adapt to different scenarios, while selectable parking lines assist with parking and maneuvering.

Window Mounted 2K DVR

iBEAM will display a new TE-DVR-30 window-mounted 2K DVR that can conveniently capture potentially vital information related to traffic collisions or other incidents. The 2K video quality ensures that a vehicle's driving history will be recorded with license plates and street signs displayed legibly. This device can help protect drivers from liability in cases where video evidence needs to be presented in a court setting or for insurance purposes. This window-mount DVR plugs into a standard 12V outlet that is universal to most vehicles and can be installed forward or rear-facing. It supports up to a 128GB micro memory card (not included) to provide ample storage capability. Once the memory card is full, this DVR is designed to loop back to the beginning of the feed and start recording over the oldest content. This prevents users from manually deleting their old content to free up space on the memory card. A built-in G-force sensor detects collisions and automatically locks the stored video to prevent recordings from being overwritten once an incident has occurred.

More information about these products will be available at iBEAMusa.com soon after the SEMA Show.

At Metra, 12volt installation and integration is our passion. We strive to continuously offer the highest quality products to meet the fluctuating technological challenges of the automotive world. We actively listen to our customers’ requests and invest resources in developing the highest quality dash kit and harness solutions. We make dash kits for more vehicle applications than anyone else in the world. That’s why we’ve been known as “The Installer’s Choice” for 75+ years. Our other brands include: Axxess®, T-SPEC®, The Install Bay®, Heise LED Lighting Systems®, iBEAM Vehicle Safety Systems®, Shuriken High Performance Batteries®, Raptor®, Ballistic®, AmmoTenna®, Metra PowerSports®, Saddle Tramp®, Metra Marine®, Daytona Lights®, and Tsunami®. For ordering information and pricing, visit Metra Electronics online at MetraOnline.com or call 386-257-2956.

2018 SEMA Show New Product Rollout

Holly Hill, Fla. – October 4, 2018 – iBEAM Vehicle Safety Systems® by Metra Electronics®, the leading manufacturer of aftermarket automotive solutions, introduces its first power-operated lift gates that open with the press of a button. Life just got a little easier with these vehicle specific plug-n-play kits that are quick and easy to install, designed for select Toyota RAV4, Honda CRV, Ford Escape, Chevrolet Equinox and GMC Terrain models. The iBEAM lift gate kits include a button for both front and rear, in some vehicles, allowing the lift gate to be operated from either location. Additionally, it adds the ability for the factory keyless remote to open and close the tailgate.

The built-in intelligent safety design, called smart avoid pinch, prevents the lift gate from closing once it has touched anything in its path. The lift gates have the ability to have the opening height adjusted and also have a safety alarm that sounds when the lift gate is in operation. All mounting hardware, the vehicle specific brackets and harnesses are included with each kit. For a completely hands-free solution, add the iBEAM Foot Control Automatic Opener (TE-ATO) to work with one of the new power-operated lift gate kits. These new kits will be on display at the 2018 SEMA Show, from October 30 - November 2 at booth 11639 in the North Hall of the Las Vegas Convention Center.

iBEAM Vehicle Specific Lift Gate Kits - Now Shipping:

  • TE-PLGRAV

Fits Toyota RAV4 2015-2018

  • TE-PLGCRV

Fits Honda CRV 2017-2018

  • TE-PLGESC

Fits Ford Escape 2016-2018

  • TE-PLGEQN1

Fits Chevy Equinox 2012-2017

  • TE-PLGEQN2

Fits Chevy Equinox 2018-2019

  • TE-PLGTER

Fits GMC Terrain 2015-2017

iBEAM Foot Control Automatic Trunk Opener

TE-ATO Product Specifications:

• 2 sensor detection design

• Simple kick action to engage trunk opener

• Built-in integration for positive and negative trigger systems, or directly to the trunk switch

Compatible with vehicles equipped with motorized trunk openers

At Metra, 12-volt installation and integration is our passion. We strive to continuously offer the highest quality products to meet the fluctuating technological challenges of the automotive world. We actively listen to our customers’ requests and invest resources into developing the highest quality dash kit and harness solutions. We make more dash kits for the most vehicle applications than anyone else in the world. That’s why we’ve been known as “The Installer’s Choice”® for more than 70 years. Our brands include: Axxess®, T-Spec®, The Install Bay®, Heise LED Lighting Systems®, iBeam Vehicle Safety Systems®, Shuriken High Performance Batteries®, Raptor®, Ballistic® and AmmoTenna®.  Metra’s expertise in connectivity solutions is also applied to its division of premium home theater and surveillance products, Metra Home Theater Group®. For ordering information and pricing, visit Metra Electronics online at MetraOnline.com or call 800.221-0932.

Even More Cameras, Monitors and Kits Round Out the Comprehensive iBeam Product Line for Safety Essentials

Holly Hill, FL - October 2017 – iBeam Vehicle Safety Systems®, a brand by Metra Electronics, expands its consumer solutions at the 2017 SEMA Show in Las Vegas from October 31 - November 3. A wide range of front, rear and side view cameras, with many different backup camera options will be showcased on working displays. New consumer vehicle solutions also include video screens, replacement mirror monitors and kits. All of iBeam’s new products will be at Metra’s main booth #11639 in the North Hall. Products specifically for the off-road, powersports and truck accessories market will be on display at booth #35227 in the South Hall. A three year warranty is included with all iBeam products.

Front, Rear and Side View Cameras

iBeam’s massive product line expansion includes 24 new waterproof cameras for consumer applications, including backup cameras with options for active parking lines, LED night vision, or both. Additional options include surface mount, hole mount or behind the license plate cameras, with fixed angle or adjustable designs, wide viewing angles and defeatable parking assist lines. Backup cameras without night vision LEDs are also available in flush, plate or surface mount options.

Video Screens

New color LCD video displays are available in 3.5 inch, 4.3 inch, 5 inch and 7 inch models. The 7 inch screen (TE-7VS) has a dashboard mount base and includes a rear-view camera and secondary input. The 5 inch screen (TE-50VS) and 4.3 inch screen (TE-43VS) are dashboard or windshield mount displays for a rear-view camera and secondary input. The 3.5 screen (TE-35MV) has a single input for the rear-view camera, and it’s multi-view function allows the image to be rotated to match the dashboard or windshield mounting orientation.

Replacement Mirror Monitors with Integrated Color LCD Screen

 A variety of universal replacement mirror monitors offer solutions for any preference or budget, with an integrated color LCD screen. A replacement mirror monitor (TE-RM45) displays a 4.5 inch feed for up to two camera inputs and includes the most widely used windshield mounts. Optional, vehicle-specific mounts are available. This mirror monitor is also available with Bluetooth® 4.1 (TE-BTM45) to integrate for hands free calling, voice dialing and displaying the incoming phone number. This model also streams audio for navigation prompts. The replacement mirror monitor also includes an option for temperature and compass display (TE-CTM45), to show the vehicle’s direction and interior and outside temperatures integrated into the top right mirror monitor.

A cost effective clip-on mirror monitor solution (TE-CM43) clips over an existing mirror and displays a 4.3 inch feed of the rear-view camera when the vehicle is in reverse. It allows for easy, universal installation.

Each of the four mirror monitor models can be purchased as a kit, with iBeam’s butterfly mount camera, flush mount camera, license plate mount camera or heavy duty night vision and microphone camera. See all of the new iBeam products in the 2018 Catalog, which will be released on 10/31/17 at iBeamUSA.com.

Holly Hill, FL – July 25, 2019 – Metra Electronics®, the leading manufacturer of aftermarket automotive solutions, is excited to announce that iBEAM Vehicle Safety Systems has released a new Tailgate Handle Camera for Ford F-150 (1997-2005) and Super Duty (1999-2007) trucks. This unobtrusive rearview backup camera with a CMOS ¼” sensor provides a sharp, clear picture during the day or night with 0.1 lux night vision. With a wide field of view and defeatable parking lines, it allows the driver to maneuver their larger vehicle with confidence when backing up. The TE-FDFTG is in stock now and iBEAM is one of the few companies to offer a tailgate handle camera for these models.

TE-FDFTG Product Specifications

  • Replaces OEM handle
  • CMOS ¼” sensor
  • Resolution: 400 TV lines
  • Field of view: Diagonal 168 degrees, Horizontal 136 degrees, Vertical 100 degrees
  • 0.1 lux
  • IP69 rated
  • Defeatable parking lines
  • 26ft. extension cable included
  • 3-year warranty

Visit iBEAMusa.com for up-to-date, vehicle specific information.

At Metra, 12-volt installation and integration is our passion. We strive to continuously offer the highest quality products to meet the fluctuating technological challenges of the automotive world.  We actively listen to our customers’ requests and invest resources in developing the highest quality dash kit and harness solutions. We make dash kits for more vehicle applications than anyone else in the world. That’s why we’ve been known as “The Installer’s Choice” ® for more than 72 years. Our other brands include: Axxess®, T-Spec®, The Install Bay®, Heise LED Lighting Systems®, iBEAM Vehicle Safety Systems®, Shuriken High Performance Batteries®, Raptor®, Ballistic®, AmmoTenna®, Metra PowerSports®, Saddle Tramp® and Metra Marine®. Metra’s expertise in connectivity solutions is also applied to its division of premium home theater and surveillance products, Metra Home Theater Group®.  For ordering information and pricing, visit Metra Electronics online at MetraOnline.com or call 386-257-2956.

 

Holly Hill, Fla. – December 30, 2019 – Metra Electronics®, the leading manufacturer of aftermarket automotive solutions, is excited to announce two new universal replacement rearview mirror monitors from iBEAM Vehicle Safety Systems® launching at CES. An OE-style auto-dimming mirror with a 4.3” built-in screen and a full 9” touchscreen live streaming mirror monitor and camera kit will be on display and available soon. These new solutions provide drivers with the ability to upgrade to better technology with quality aftermarket safety products.

iBEAM’s OE style auto-dimming mirror with a 4.3” built-in monitor (TE0AD43) reduces the glare on a bright sunny day or from headlights at night. The mirror automatically adjusts the mirror and monitor screen based on the lighting environment to allow the driver a visual that’s easier to see in any lighting condition. Sensors on the front and rear of the mirror adjust the brightness of the mirror and the monitor as they detect weak or strong light sources from headlights, oncoming traffic or sunlight. The mirror has two video inputs for a backup camera and an additional camera view, controlled with a reverse trigger. An optional setting for parking lines can be adjusted in distance and pitch from the mirror itself or the included remote. The TE-AD43 can be paired with any of iBEAM’s universal cameras for a complete solution.

TE-AD43 Product Specifications:

  • Automatic brightness adjustment for mirror and monitor
  • OE style auto-dimming mirror
  • 2 video inputs                                                
  • Reverse trigger input
  • Adjustable parking lines via remote (included)
  • Cameras not included

Drivers can remove obstructions to see the rear and front view of the vehicle in real-time with iBEAM’s touchscreen mirror and camera kit (TE-SM9). This large 9” color LCD touchscreen mirror features no lag with 1080p resolution at 30fps for the rear and front cameras. A built-in dual-channel DVR captures the front and rear video feeds simultaneously to prevent liability in case of an accident and has a G-sensor to prevent video from being overwritten.

This camera system includes ADAS features built into the mirror monitor touchscreen. The split screen mode shows a visual of both front and rear views, with optional lane detection watch and forward collision warnings for the driver with audible alerts. The camera can also capture still photos and be used in parking mode for additional surveillance. Settings are adjusted through the mirror’s touchscreen.

TE-SM9 Product Specifications:

  • 9" full color LCD touchscreen with no lag, real-time rearview image
  • Built-in front and rear cameras with 1080p resolution at 30fps
  • Dual-channel DVR captures front and rear feeds simultaneously
  • Split screen visual available
  • ADAS visual for lane detection watch and forward collision warning with audible alerts available when in split screen
  • Ability to take snapshots of the camera feed with self timer and adjustable photo quality settings
  • Loop recording with adjustable G-sensor settings to prevent video from being overwritten in case of impact
  • Parking mode available for recording video when the vehicle is not in motion
  • Supports a maximum 128GB micro SD card (sold separately)
  • If windshield bracket is not a universal D-shaped bracket, iBEAM’s TE-M06 (sold separately) will be required for installation

Both of these solutions will be on display with Metra Electronics at booth 5211 in the North Hall at CES from January 7-10, 2020. Visit iBEAMusa.com for additional details.

At Metra, 12-volt installation and integration is our passion. We strive to continuously offer the highest quality products to meet the fluctuating technological challenges of the automotive world. We actively listen to our customers’ requests and invest resources into developing the highest quality dash kit and harness solutions. We make dash kits for more vehicle applications than anyone else in the world. That’s why we’ve been known as “The Installer’s Choice” ® for more than 72 years. Our other brands include: Axxess®, T-SPEC®, The Install Bay®, Heise LED Lighting Systems®, iBEAM Vehicle Safety Systems®, Shuriken High Performance Batteries®, Raptor®, Ballistic®, AmmoTenna®, Metra PowerSports®, Saddle Tramp®, Metra Marine® and Daytona Lights™. Metra’s expertise in connectivity solutions is also applied to its division of premium home theater and surveillance products, Metra Home Theater Group®. For ordering information and pricing, visit Metra Electronics online at MetraOnline.com or call 386-257-2956.

2018 SEMA Show New Product Rollout

Holly Hill, Fla. – October 3, 2018 – Metra Electronics®, the leading manufacturer of aftermarket automotive solutions, introduces its first iBEAM Vehicle Safety Systems® dual lens high definition dashcam, the TE-DVR-DL. This low profile 1080p digital video recorder offers a camera for forward facing recording and a camera for recording the interior of the vehicle. This dashcam is available now and will also be on display at the Metra Electronics booth 11639 (North Hall) and 37011 (South Hall Upper Level) at the 2018 SEMA Show in Las Vegas.

The iBEAM dashcam plugs directly into a standard 12volt outlet and is capable of recording 1080p video. A built-in G-force sensor will detect collisions and automatically lock the captured video to prevent it from being overwritten. It is easily mounted and also easily removed from the windshield with a sliding 3M tape mount. The TE-DVR-DL also has the capability to take a photo with the press of a button and supports up to 32GB of storage via an SD card. The built-in screen allows for viewing while recording but can also be used to view playback of the recordings. It can also connect via Wi-Fi to an app for remote viewing from a smartphone or tablet.

In the event of a collision, interior footage can provide critical video evidence to show if a driver was alert at the time of an accident, while forward facing footage will show what happened and if another vehicle was at fault. This is also valuable for commercial drivers or fleet owners in the event of a crash and lawsuit. According to a recent article in Overdrive, the National Transportation Safety Board “has been pushing for video recording devices in CMVs since 2010, including them as a recommendation on the board’s ‘Most Wanted’ list, even calling for regulators to mandate the devices in recent years.” The NTSB went on to say that “driver-facing video can be invaluable when investigating a crash..” and that “in addition to helping investigators determine fault in crashes, some larger trucking companies are using dashcams to help coach drivers – even those with exemplary safety records – on being safer drivers.”

Additional instructions and information about the TE-DVR-DL are available at iBEAMusa.com.

At Metra, 12-volt installation and integration is our passion. We strive to continuously offer the highest quality products to meet the fluctuating technological challenges of the automotive world. We actively listen to our customers’ requests and invest resources into developing the highest quality dash kit and harness solutions. We make more dash kits for the most vehicle applications than anyone else in the world. That’s why we’ve been known as “The Installer’s Choice”® for more than 70 years. Our brands include: Axxess®, T-Spec®, The Install Bay®, Heise LED Lighting Systems®, iBEAM Vehicle Safety Systems®, Shuriken High Performance Batteries®, Raptor®, Ballistic® and AmmoTenna®.  Metra’s expertise in connectivity solutions is also applied to its division of premium home theater and surveillance products, Metra Home Theater Group®. For ordering information and pricing, visit Metra Electronics online at MetraOnline.com or call 800.221-0932.

Giving Drivers Optimum Views

Holly Hill, Fla. – July 12, 2018 – Metra Electronics®, the leading manufacturer of aftermarket automotive solutions, announced today micro-cameras are being rollout by iBeam Vehicle Safety Systems®. The TE-MICM, TE-MIIRB, TE-MIIRW and the TE-MIFM are used primarily as reverse cameras, but can also be used in multiple locations including front and side, providing drivers with optimum views. In most installations the video is shown on an aftermarket screen, but they can be paired easily with an Axxess interface to allow images to appear on an original factory installed screen.

Micro is an accurate description for these cameras as they add zero ‘bulk’ to the profile of the vehicle. Three of the models are not a flush mounts, but have the ability to be mounted in two different directions. Each has a 180 degree vertical view with a switchable image, and is able to be mounted under the lip of a trunk lid or on a high-vantage point on the back of a work van. The micro-cameras also offer selectable parking lines and have the ability to mirror an image.

“Having the confidence to drive knowing you are covered from all angles provides the next level in safety. Installing iBeam micro- cameras removes the dangers of backing up blindly or awkwardly trying to parallel Park in a tight space,” said Stephanie Carver, director of iBeam product development.

Product Specifications:

TE-MICM

  • 8mm threaded bolt for mounting
  • Black housing
  • ¼ CMOS image sensor
  • Water Resistant: IP68
  • Resolution: 500 TV lines
  • Mirror/Normal Image: Switchable
  • Parking line on/off: Switchable
  • Viewing angles
  • Horizontal – 138
  • Vertical – 108
  • Diagonal - 178

TE-MIIRB, TE-MIIRW

  • 8mm threaded bolt for mounting
  • .75” inches height of camera housing
  • IR LEDs
  • Black housing (TE-MIIRB)
  • White housing (TE-MIIRW)
  • ¼ CMOS image sensor
  • Water Resistant: IP68
  • Resolution: 500 TV lines
  • Mirror/Normal Image: Switchable
  • Parking line on/off: Switchable
  • Viewing angles
  • Horizontal – 138
  • Vertical – 108
  • Diagonal - 178

TE-MIFM

  • ¼ CMOS image sensor
  • Minimum illumination: 0.1Lux /F1.2
  • Water Resistant: IP68
  • Resolution: 500 TV lines
  • Mirror/Normal Image: Switchable
  • Parking line on/off: Switchable
  • Diameter:  .50 inches
  • Viewing angles
  • Diagonal - 178
  • Horizontal - 135
  • Vertical – 105

At Metra, 12-volt installation and integration is our passion. We strive to continuously offer the highest quality products to meet the fluctuating technological challenges of the automotive world. We actively listen to our customers’ requests and invest resources into developing the highest quality dash kit and harness solutions. We make more dash kits for the most vehicle applications than anyone else in the world. That’s why we’ve been known as “The Installer’s Choice®” for more than 70 years. Our brands include: Axxess®, T-Spec®, The Install Bay, ® Heise LED Lighting Systems®, iBeam Vehicle Safety Systems®, Shuriken High Performance Batteries®, Raptor®, Ballistic® and AmmoTenna®.  Metra’s expertise in connectivity solutions is also applied to its division of premium home theater and surveillance products, Metra Home Theater Group®. For ordering information and pricing, visit Metra Electronics online at MetraOnline.com or call 800.221-0932.

Holly Hill, Fla. – October 15, 2018 – iBEAM by Metra Electronics® is introducing new vehicle safety products at the 2018 SEMA Show, designed to improve driver visibility, add convenience and install easily. Vehicle-specific solutions include factory-style third brake light cameras for Ram, Nissan and Ford commercial vans and a wide range of factory-style tailgate handle backup cameras. New universal products include a dual-lens dash cam and DVR and large replacement mirror monitor. iBEAM’s recently introduced micro-cameras, power lift gates and high-tech touchscreen mirror monitor kit will also be on display at the show.

High-Resolution Third Brake Light and License Plate Commercial Van Cameras:

The TE-3BNV2 and TE-3BDP2 cameras use the factory brake light and expand it to add the camera, allowing for a clean install keeping the OEM style, but with the added safety and security of a reverse camera. iBEAM’s TE-FDPL is a replacement license plate light camera which also maintains the OEM look and feel. Each camera offers a CMOS ¼ sensor, 580 TV line resolution, selectable parking lines and a 170 degree viewing angle. Available soon.

Product Specifications

  • CMOS ¼ sensor
  • Resolution: 580 TV lines
  • Viewing angle: 170 degrees diagonal
  • Selectable parking lines
  • IP67
  • 23’ of extension cable

TE-3BNV2 - Nissan NV200 2010-Up* Commercial Brake Light Camera

  • Extends the third brake light to allow camera addition

TE-3BDP2 - Ram Pro-master Van 2014 to 2017 Commercial Brake Light Camera

  • Extends out the third brake light to allow camera addition

TE-FDPL - Ford Transit 2010 to 2016 License Plate Light Camera

  • Replaces one of the license plate light covers to accommodate a camera

Tailgate Handle Backup Cameras:

iBEAM is introducing nine new vehicle-specific tailgate handle backup cameras that maintain the factory look and feel of the vehicle. These solutions replace the OEM tailgate handle to provide a non-obtrusive reverse camera. Specifications vary for each model. Available soon.

Solutions will be available to fit:

  • 1999-2006 Chevrolet Silverado / GMC Sierra (TE-GMSH)
  • 2002-2008 Dodge Ram Truck (TE-RMH)
  • 2001-2016 Ford F-150 / Superduty (TE-FDEM, Emblem Camera)
  • 1992-up* Ford Econoline (TE-FDEH)
  • 2013-up* Nissan Frontier (TE-NFH)
  • 2016-up* Toyota Tacoma / 2014-up* Toyota Tundra (TE-TATUH)
  • 2012-up* Ford Ranger / Mazda BT50 (TE-FDRH)
  • 2015-up* Toyota Hilux Revo (TE-THH)
  • 2015-up* Nissan Navara D23 (TE-NAVHC)

Dual Lens Dashcam and DVR:

iBEAM introduces its first dual-lens high-definition dashcam, the TE-DVR-DL. This low profile 1080p digital video recorder offers a camera for forward facing recording and a camera for recording the interior of the vehicle, with a built-in DVR that supports up to 32GB of storage via SD card. The built-in screen allows for viewing while recording but can also be used to view playback of the recordings. It can also connect via Wi-Fi to an app for remote viewing from a smartphone or tablet, and is portable, connecting to a standard 12v outlet for operation. It quickly mounts to the windshield and is easily removed with a sliding 3M tape mount. Now shipping.

TE-DVR-DL Product Specifications

  • Digital video recorder with dual camera recording
  • One camera for forward facing recording
  • One camera for interior of the vehicle recording
  • Plugs into standard 12v outlet for operation
  • Capable of full 1080p dual recording
  • Built-in g-force sensor detects collisions and locks the captured video to prevent being overwritten
  • Take photos with the press of a button
  • Built-in screen, also connects to Wi-Fi enabled app
  • iBEAM SD card (TE-16SD) sold separately
  • Max 128GB SD card

7.3” Replacement Mirror Monitor:

The TE-RM7 boasts 1280x480 resolution to display up to three different camera inputs in a factory-style rearview mirror. It has three analog triggers for each input and includes the most widely used windshield mount for easy installation. (If the vehicle does not have a universal footprint on the windshield, use the TE-M06, sold separately). Available soon.

TE-RM7 Product Specifications

  • Replacement mirror with monitor built-in for viewing multiple cameras
  • Large 7.3" monitor
  • 3 separate inputs for 3 individual cameras
  • 3 analog triggers for each input
  • Includes most widely used windshield mount, if vehicle does not have universal footprint on windshield, use TE-M06, sold separately
  • Resolution: 1280x480

A three year manufacturer’s warranty is offered with iBEAM products purchased from authorized resellers. See all of iBEAM’s latest safety solutions at SEMA, in the Metra Electronics main booth 11629 (North Hall). Off-road, truck and powersports accessories will be at booth 37011 in the South Upper Level, which will include iBEAM’s dashcams.

*See iBEAMusa.com for up-to-date, vehicle specific information.

At Metra, 12-volt installation and integration is our passion. We strive to continuously offer the highest quality products to meet the fluctuating technological challenges of the automotive world. We actively listen to our customers’ requests and invest resources into developing the highest quality dash kit and harness solutions. We make more dash kits for the most vehicle applications than anyone else in the world. That’s why we’ve been known as “The Installer’s Choice” ® for more than 72 years. Our other brands include: Axxess®, T-Spec®, The Install Bay®, Heise LED Lighting Systems®, iBEAM Vehicle Safety Systems®, Shuriken High Performance Batteries®, Raptor®, Ballistic®, AmmoTenna®, Metra PowerSports®, and Metra Marine®. Metra’s expertise in connectivity solutions is also applied to its division of premium home theater and surveillance products, Metra Home Theater Group®. For ordering information and pricing, visit Metra Electronics online at MetraOnline.com or call 800.221-0932.

Holly Hill, FL - December 27, 2017 – iBeam Vehicle Safety Systems® by Metra Electronics® will debut a new Foot Control Automatic Trunk Opener at CES 2018. The TE-ATO is a universal, aftermarket solution that works with any vehicle equipped with a power liftgate.

Once the two sensors are installed, the trunk can be opened hands free by a simple kick action near the vehicle. This versatile trunk opener is integrated for positive trigger systems (common on GM vehicles), negative trigger systems (common on Ford and imports), or it can be connected directly to the trunk switch.

“The 2-sensor detection design allows the trunk to open with a little kick near the rear bumper,” says Jon Osborne, product director for iBeam Vehicle Safety Systems at Metra Electronics. “This added convenience will make daily tasks much easier for loading up the trunk - especially when your hands are full,” Osborne added. It is recommended for vehicles also equipped with proximity key unlock for a fully hands free experience.

This product is currently in stock and shipping. See the TE-ATO, along with more than 50 new safety products for 2018, on display at the Metra Electronics CES booth #5211 in the North Hall. CES is held January 9 - 12, 2018 in the Las Vegas Convention Center. Learn more about iBeam Vehicle Safety Systems at iBeamUSA.com. 

Holly Hill, FL - December 14, 2017 – iBeam Vehicle Safety Systems® by Metra Electronics® is introducing a new 360 degree 3D view camera system at 2018 CES. This 3D camera system, the TE-360-3D, is a step up from their latest 360 degree camera system, the TE-360, with its new virtual 3D view feature. This feature allows the driver to see different angles of their vehicle at a bird’s eye view for ultimate visibility.

Four cameras mount to each side of the car and are custom calibrated by the installer for image fusion. The innovative control processor blends the feeds into one seamless 360 degree panoramic view. An additional virtual 3D view on the right shows the vehicle from an overhead perspective, allowing the user to pan in their desired direction. This added 3D feature gives the driver complete coverage, with an aerial view of the vehicle similar to what you’d experience in a video game or virtual reality.

Integrated turn and reverse triggers provide instantaneous displays of side or rear camera feeds when changing lanes, parking or reversing. This cutting-edge system provides an unobstructed view of vehicle surroundings, while recording all four channels simultaneously. Drivers can also toggle through multiple camera views for maximum guidance. For security surveillance purposes, the camera system can also record while the vehicle is parked.

The TE-360-3D uses tape (included with the system) for fast calibration. The tape is placed on the floor around the vehicle for an easy and more precise calibration method. SD cards (TE-16SD) are sold separately. See this exciting new technology at the Metra Electronics CES booth #5211 in Las Vegas, from January 9 - 12, 2018.

Holly Hill, Fla. –  October 8, 2019 – Metra Electronics®, the leading manufacturer of aftermarket 12volt installation solutions, will introduce new automotive cameras from iBEAM® at the 2019 SEMA Show. As more drivers see the value in upgrading their vehicles to reduce blind spots, prevent a collision, and in the event of an accident, protect themselves from liability with recorded footage, installers have an opportunity to provide quality aftermarket solutions from iBEAM that rival high-end OEM options.

Universal 360-Degree Interior View Cameras

iBEAM will introduce two new camera systems that record everything going on while driving - both inside and out. The difference between the kits is that one displays video on a replacement rearview mirror monitor and the other has a built-in DVR and displays video on an LCD monitor that mounts to the dash or windshield.

The TE-360M45 replacement rearview mirror with a built-in 360-degree dash camera mounts onto the windshield to simultaneously record the driver's view of the front of the vehicle and the interior of the vehicle. The TE-DVR360 dash camera and touchscreen LCD monitor is mounted onto the windshield for a complete 360-degree view from the driver's perspective, including the interior of the vehicle. Both systems allow the user to pan left or right on the touchscreen for a wider field of view and also offer a split or quad-screen view. The camera kits also include a rearview camera that mounts outside on the back of the vehicle for a 130-degree diagonal field of view when in reverse. Both cameras have an interior audio recording and snapshot capability that is ideal for rideshare or commercial drivers looking to document both the interior and exterior vehicle events with high-definition 1080p video recording. Both the TE-360M45 and the TE-DVR360 come complete with a universal mount for any car model and easy installation. The TE-360M45 comes with 480x845 resolution on a 4.5” touchscreen monitor that displays within the replacement rearview mirror, while the TE-DVR360 comes with 480x800 resolution on a 4” LCD touchscreen with a built-in DVR. 

Owners can choose to record while driving and also when they are away from their vehicle. The parking mode features are equipped with built-in collision lock G-sensors that begin to record with a shock to the vehicle when it is turned off and parked. This built-in collision lock ensures that video is recorded and files are locked in case of an accident to avoid overwriting. Footage is stored on a microSD card that can support up to 32GB of space. Storage management is automated with the loop recording feature that is continually deleting old footage in minute segments to record new footage.

TE-360M45 Product Specifications

●      360-degree front camera view: 1440x1440/H360 @ 24fps (includes driver’s view of the front of the vehicle and interior of vehicle)

●      Users can touch the video screen to pan from one side to the other to see a wider field of view from the front camera

●      Rear camera view: 1280x720 @ 15fps

●      Rear camera field of view: diagonal 130 degrees, horizontal 90 degrees (+ or - 5 degrees), vertical 52 degrees

●      Interior audio recording

●      LCD 4.5" touchscreen built into replacement rearview mirror

●      Maximum 32GB microSD card (class U1 or U3) (sold separately)

●      Resolution: 480x845

●      1080p

●      Luminance: 400 nits

●      Parking mode and monitor

●      Collision lock support

●      Universal mount, if vehicle does not have a universal footprint for mirror windshield mount than it requires a TE-M06 mount (sold separately)

●      3 year warranty

 

TE-DVR360 Product Specifications

●      360-degree front camera view (includes driver’s view and interior of vehicle)

●      130-degree rear camera included for rear of vehicle recording

●      Rear camera field of view: diagonal 130 degrees, horizontal 90 degrees (+ or - 5 degrees), vertical 52 degrees

●      Interior audio recording

●      480x800 resolution on LCD 4" touchscreen monitor for viewing

●      1080P

●      Luminance: 400 nits

●      Loop recording in minute segments

●      Built-in DVR with collision lock support

●      Maximum 32GB microSD card (class U1 or U3) (sold separately)

●      Parking mode feature to record while the vehicle is off

●      Voltage protection

●      Mounts to the windshield using double-sided tape (included in the kit)

●      3 year warranty

 

Replacement Third Brake Light Cargo Camera for Ford® 

iBEAM is introducing a new solution to replace the factory third brake light with a rear-facing camera designed for the 2015-2019 Ford F-150, the 2019 Ranger and the 2017-2019 F-Series Super Duty models. The camera allows the driver to keep an eye on any cargo in the bed of the truck with a 170-degree rear camera view. This unobtrusive camera is complete with a black-out lens, matches the OEM style and has easy installation.

TE-FDCC1 Product Specifications

●      LED third brake light replacement  

●      Built-in camera with black-out lens 

●      Resolution: 480 TV lines 

●      Field of rear camera view: diagonal 170 degrees, horizontal 130 degrees, vertical 92 degrees

●      Min. illumination: 0 lux

●      Selectable parking lines 

●      32 foot /10 meter extension cable included

●      22 inch /.55 meter camera cable included

●      IP68 rated

●      Rear mounting

●      3 year warranty

Metra Electronics® will showcase these new products from iBEAM at the SEMA Show in Las Vegas from November 5th - 8th at booth 11639 in the North Hall. iBEAM will also have its new Motion Detection Camera (TE-MDC) and Tailgate Handle Camera for Ford (TE-FDFTG) on display, which were both released earlier this year. iBEAM’s new products will also be featured in Metra’s 2019 New Product Guide, released on the opening day of the show and available for download at MetraOnline.com. Additional vehicle safety solutions can be seen at iBEAMusa.com.

At Metra, 12volt installation and integration is our passion. We strive to continuously offer the highest quality products to meet the fluctuating technological challenges of the automotive world.  We actively listen to our customers’ requests and invest resources into developing the highest quality dash kit and harness solutions. We make dash kits for more vehicle applications than anyone else in the world. That’s why we’ve been known as “The Installer’s Choice” ® for more than 72 years. Our other brands include: Axxess®, T-SPEC®, The Install Bay®, Heise LED Lighting Systems®, iBEAM Vehicle Safety Systems®, Shuriken High Performance Batteries®, Raptor®, Ballistic®, AmmoTenna®, Metra PowerSports®, Saddle Tramp® and Metra Marine®. Metra’s expertise in connectivity solutions is also applied to its division of premium home theater and surveillance products, Metra Home Theater Group®.  For ordering information and pricing, visit Metra Electronics online at MetraOnline.com or call 386-257-2956.

Holly Hill, Fla. – April 11, 2019 – iBEAM Vehicle Safety Systems® by Metra Electronics® is now shipping an Advanced Driver Assistance System motion detection camera that provides cross path alerts, shows hidden objects and more. The TE-MDC is a universal solution that requires no calibration and can be mounted to the front or rear of the vehicle. It includes an audible alarm and built-in control module, without the need for an additional control box.

Using the TE-MDC driver assistance system, the overall visual range is increased to help minimize the blind spot areas around the vehicle and warn the driver of potential collisions. This adds value and safety to the vehicle by reducing accident rates and the risk of hitting unseen objects in the most common situations. Depending on the location of the installation, this versatile camera can provide a variety of safety features for drivers. One product provides installers with the ability to customize different safety solutions for their clients, depending on their needs.

Moving Object Detection System

The TE-MDC system gives the driver a completely seamless view of moving objects and provides a detection warning for potential objects in the path of the vehicle. The Moving Object Detection (MOD) assistance system helps alert the driver of unseen risks in situations like parking, maneuvering or driving with a trailer.

Side and Rear Detection and Alerts

If installed in the back of the vehicle, the TE-MDC provides drivers with a rear cross traffic alert, a backward vehicle approaching alert, blind spot detection and also an open door warning. The Rear Cross Traffic Alert (RCTA) is used when backing out of a parking spot or driveway. The system is triggered and provides both a visual and audible alert to warn the driver if it detects any cross traffic or objects in the vehicle’s path. This includes hard to see pedestrians, motorcycles and bicycles. The Backward Vehicle Approaching Warning (BVAW) system detects potential rear-end collisions and triggers an alarm for the driver. The Blind Spot Detection (BSD) system helps drivers by providing peace of mind and increased safety when changing lanes. The BSD technology monitors the traffic area behind and next to the vehicle and warns the driver if an object is located in the blind spot.

TE-MDC Product Specifications

●        Single camera that can be mounted in the front or rear of the vehicle

●        Provides visual with motion detection overlay for cross-path alerts

●        Audible alarm included

●        Built-in control module with no additional control box required

●        No calibration required for setup

●        Water-resistant IP68 rated housing

●        180-degree sensing angles with 160-degree horizontal field of view

The iBEAM TE-MDC is available now from Metra Electronics. Additional information can be seen at iBEAMusa.com. 

At Metra, 12-volt installation and integration is our passion. We strive to continuously offer the highest quality products to meet the fluctuating technological challenges of the automotive world.  We actively listen to our customers’ requests and invest resources in developing the highest quality dash kit and harness solutions. We make dash kits for more vehicle applications than anyone else in the world. That’s why we’ve been known as “The Installer’s Choice” ® for more than 72 years. Our other brands include: Axxess®, T-Spec®, The Install Bay®, Heise LED Lighting Systems®, iBEAM Vehicle Safety Systems®, Shuriken High Performance Batteries®, Raptor®, Ballistic®, AmmoTenna®, Metra PowerSports®, Saddle Tramp® and Metra Marine®. Metra’s expertise in connectivity solutions is also applied to its division of premium home theater and surveillance products, Metra Home Theater Group®.  For ordering information and pricing, visit Metra Electronics online at MetraOnline.com or call 800.221-0932.

 

Holly Hill, FL – July 8, 2021 – iBEAM Vehicle Safety Systems by Metra Electronics® has two new commercial safety products in stock and shipping. A wireless 7-inch monitor and high-definition camera package, the TE-WMCE, and a 9-inch quad-view monitor, the TE-9VS-4. Both universal solutions feature heavy-duty construction and are designed for the demands of larger vehicles like commercial work vans, RVs, and more.

Wireless Digital Rearview Monitor and Camera System

The TE-WMCE is a wireless rearview system featuring a wide-angle, high-definition camera and 7-inch LCD screen monitor. It has a 90-meter/300-foot range that is ideal for larger vehicles where running wires may not be an efficient option. The monitor has a universal lip mount and connects to the included DC/cigarette socket power plug for an easy setup. The power plug has an on/off button for easy activation of the monitor.

TE-WMCE Product Specifications:

  • Wireless HD camera and monitor kit
  • 7-inch color LCD screen
  • 90m / 300ft wireless range
  • DC socket for monitor power with on/off button for easy activation
  • Camera – Rated IP67
  • Camera visual angle – 70 degrees horizontal
  • Camera has IR LEDs for 0 lux minimum illumination at night

Commercial Multi-View 9-Inch Monitor

iBEAM’s TE-9VS-4 is a 9-inch color LCD screen that shows up to four cameras simultaneously with multiple display layouts. It has a removable sun shade, a built-in speaker for camera audio, four 4-pin DIN camera input connectors, and includes a remote for easy operation. This monitor features heavy-duty construction with a tilting bracket mount that can be adjusted up to 30 degrees forward or backward for an optimal viewing angle.

TE-9VS-4 Product Specifications:

  • 9-inch color LCD screen
  • Heavy-duty tilting bracket mount
  • Displays 1 to 4 cameras simultaneously with multiple display layouts
  • Includes remote
  • Built-in speaker for camera audio

These solutions are in stock now. Visit iBEAMusa.com for additional product information.

At Metra, 12volt installation and integration is our passion. We strive to continuously offer the highest quality products to meet the fluctuating technological challenges of the automotive world. We actively listen to our customers’ requests and invest resources in developing the highest quality dash kit and harness solutions. We make dash kits for more vehicle applications than anyone else in the world. That’s why we’ve been known as “The Installer’s Choice” ® for more than 75+ years. Our other brands include: Axxess®, T-SPEC®, The Install Bay®, Heise LED Lighting Systems®, iBEAM Vehicle Safety Systems®, Shuriken High Performance Batteries®, Raptor®, Ballistic®, AmmoTenna®, Metra PowerSports®, Saddle Tramp®, Metra Marine® and Daytona Lights®. Metra’s expertise in connectivity solutions is also applied to its division of premium AV and surveillance products from MetraAV®. For ordering information and pricing, visit Metra Electronics online at MetraOnline.com or call 386-257-2956.

Holly Hill, Fla. – November 23, 2021 – iBEAM Vehicle Safety Systems® by Metra Electronics® is now shipping new cameras and accessories launched at the 2021 SEMA Show. Two new tailgate handle cameras designed to fit older model Dodge Dakota or Chevrolet C/K pickup trucks provide an OE-style replacement handle with a high-quality backup camera. iBEAM is also now shipping a new universal micro camera that can be used to add a side, front, or rear-view camera to almost any vehicle. A new universal mount is also available for mounting iBEAM’s square-style cameras to the interior rear window. These are just a few of the many new safety solutions introduced from iBEAM at the 2021 SEMA Show.

Tailgate Handle Cameras

iBEAM’s new TE-DDTG replacement tailgate handle camera is designed to fit 2005-2011 Dodge Dakota trucks and the TE-GMPU is designed to fit Chevrolet’s 1988-2002 C/K pickup trucks, providing a modern upgrade for older models. Both tailgate handle cameras are rated IP69 and have a resolution of 400 TV lines with a high-quality sensor for nighttime viewing.

TE-DDTG and TE-GMPU Product Specifications

  • Resolution: 400 TV lines
  • Field of view: 186° diagonal, 150° horizontal, 112° vertical
  • Minimum illumination: 0.1 lux
  • IP69
  • Selectable parking lines
  • 26 feet of extension cable
  • 3-year limited warranty

Universal Micro Camera

The TE-MIPI from iBEAM is a small but impressive camera with a resolution of 800 TV lines. This is a 55-degree fixed angled camera and the image can be mirrored or rotated for vertically or horizontally mounted cameras placed on side-view mirrors, front or rear bumpers, or almost any other location. It has an optional parking lines feature when used as a reverse camera or can be independently triggered. A hole saw and wiring harness are included.

TE-MIPI Product Specifications

  • Resolution: 800 TV lines
  • Viewing angle: 188° diagonal, 155° horizontal, 113° vertical
  • IP69K
  • Switchable mirror/normal image
  • Ability to trigger parking lines separately from camera power
  • Vertical image switching for different camera mounting positions
  • Hole saw included
  • 3-year limited warranty

Universal Interior Rear Window Mount

iBEAM is making it easier for installers to mount an interior rearview camera without drilling holes. The new TE-ISCMB is a universal mount that works with all of iBEAM’s square-style cameras. It attaches to the rear window with 3M® double-sided tape and includes mounting hardware.

These new products are now shipping from Metra Electronics and all of iBEAM’s new solutions launched at SEMA can be seen online at iBEAMusa.com.

At Metra, 12-volt installation and integration is our passion. We strive to continuously offer the highest quality products to meet the fluctuating technological challenges of the automotive world. We actively listen to our customers’ requests and invest resources in developing the highest quality dash kit and harness solutions. We make dash kits for more vehicle applications than anyone else in the world. That’s why we’ve been known as “The Installer’s Choice” ® for more than 75 years. Our other brands include: Axxess®, T-SPEC®, The Install Bay®, Heise LED Lighting Systems®, iBEAM Vehicle Safety Systems®, Shuriken High Performance Batteries®, Raptor®, Ballistic®, AmmoTenna®, Metra PowerSports®, Saddle Tramp®, Metra Marine® and Daytona Lights®. Metra’s expertise in connectivity solutions is also applied to its division of premium AV and surveillance products from MetraAV™. For ordering information and pricing, visit Metra Electronics online at MetraOnline.com or call 386-257-2956.

Holly Hill, FL – July 17, 2019 – Metra Electronics® is excited to be hosting six training sessions at the 2019 KnowledgeFest™ event in Dallas, Texas, for mobile electronics installers. As a Diamond Ultra sponsor, Metra is proud to support the industry by providing in-depth training sessions for installers which will outline upgraded vehicle safety systems, selling and installing lighting solutions, simplified installs with sound processors and the future of vehicle integration. Metra will also have product giveaways at each session for attendees. Installer Institute® will also be at the show, promoting their mobile electronics training programs and continuing education courses for existing installation professionals.

Both of the iBEAM training sessions, “Upgrading Vehicle Safety Systems with iBEAM,” will assist installers in identifying the essential selling points of safety and convenience, and will be held on Saturday, August 10th at 4:45 pm and Sunday, August 11th at 3:30 pm. Installing aftermarket cameras and Advanced Driver Assistance Systems in both consumer and commercial vehicles has become a significant revenue source for mobile electronics shops. Attendees will learn about iBEAM’s latest vehicle cameras, dashboard cameras with DVRs, replacement rearview mirrors, vehicle-specific solutions and commercial safety line. They’ll also learn about the hot-button selling points and features that consumers and fleet owners are asking for, plus installation tips for a better understanding of what is involved in an upgrade. Attendees will also have the chance to win product giveaways from iBEAM.

Heise will also be hosting two training sessions, “Selling and Installing Heise LED Lighting Solutions,” on Friday, August 9th at 1:45 pm and Sunday, August 11th at 4:45 pm. The recent popularity in aftermarket LED lighting presents a valuable opportunity for installers to go beyond car audio services, giving consumers a way to customize their ride and increase visibility in the dark. However, not all LED lights on the market are the same. This session will allow installers to learn about Heise’s unique features and selling points that have set this brand apart from the rest. This training will cover the new DRL lightbars, replacement LED headlights, RGB backlit lightbars, RGB accent lights and the new Municipality Series of safety lights for commercial equipment and fleet vehicles. Attendees will also have the chance to win product giveaways from Heise.

Axxess will be hosting two different training sessions. The first session, “Simplify your Installs with Axxess Digital Sound Processors,” will cover the entire Axxess AX-DSP product line and how these solutions can increase sales in the showroom and decrease time in the bay. The session will be hosted on Friday, August 9th at 3:00 pm. This session will show installers that upgrading a sound system doesn’t have to be complicated. This training will also go over and explain how to use the different types of applications offered within the AX-DSP line, including CAN-based systems, new A2B systems, MOST25, and MOST50 vehicle technology. As vehicle technology becomes more and more complex, installers can look for Metra’s patented DSP products to help simplify installation and provide affordable audio solutions for their customers.

The second Axxess training session on Saturday, August 10th at 6:00 pm, “The Future of Vehicles Integration with New Axxess Products,” explains that integration is the future of the aftermarket 12 volt industry - and it’s only getting more complex. With the reduction in OE radio chassis sizes, the rising popularity of tablet-style screens, and many of the personalization features controlled through the OE radio, it is difficult for shops to offer simple aftermarket solutions. Attendees will learn about new products from Axxess that have been engineered specifically to address the complexity of today’s integrated vehicle technology systems and retain key convenience and safety features when upgrading a radio. For consumers who want to keep their radio but add safety, navigation, smart device mirroring, or simply override the annoying STOP/START engine feature, installers can learn about these new products from Axxess that will make their customer’s ride much more enjoyable. Attendees will have the chance to win product giveaways from Axxess.

Metra’s customers can register for KnowledgeFest at no cost using Metra’s VIP code, available by request from their sales representative. Once registered for the event, attendees will also need to register online at KnowledgeFest.org for each training session they will attend. Metra will be at booth #601 from August 9-11, 2019 at the Dallas Convention Center. Additional information about the show, produced by the Mobile Electronics Association (MEA), is available at KnowledgeFest.org

At Metra, 12-volt installation and integration is our passion. We strive to continuously offer the highest quality products to meet the fluctuating technological challenges of the automotive world.  We actively listen to our customers’ requests and invest resources into developing the highest quality dash kit and harness solutions. We make more dash kits for the most vehicle applications than anyone else in the world. That’s why we’ve been known as “The Installer’s Choice” ® for more than 72 years. Our other brands include: Axxess®, T-Spec®, The Install Bay®, Heise LED Lighting Systems®, iBEAM Vehicle Safety Systems®, Shuriken High Performance Batteries®, Raptor®, Ballistic®, AmmoTenna®, Metra PowerSports®, Saddle Tramp™ and Metra Marine®. Metra’s expertise in connectivity solutions is also applied to its division of premium home theater and surveillance products, Metra Home Theater Group®.  For ordering information and pricing, visit Metra Electronics online at MetraOnline.com or call 800.221-0932.

Holly Hill, Fla. – May 26, 2021 – iBEAM Vehicle Safety Systems® by Metra Electronics® has just released a new replacement camera designed for 2020-up* Jeep® Gladiator JT models. When replacing the radio on these vehicles, the factory LVDS backup camera presents a challenge for aftermarket screens and can be expensive to retain using an interface. iBEAM’s JP-JTKT camera replaces the factory camera to provide an affordable solution that allows the driver to see their backup video on a compatible aftermarket screen when in reverse. This new solution adds to Metra’s growing product line of aftermarket Jeep® accessories.

The JP-JTKT has an RCA output for aftermarket radios or monitors with selectable parking lines and a 160-degree viewing angle. Two different types of camera mounting brackets are available to cover models equipped with either a standard backup camera or models equipped with surround or 360 systems. (Surround or 360 systems are not retained with this kit.) To help with installation, the camera comes with detailed instructions and Metra also has an installation video at https://youtu.be/NLXRKsRFArM. The JP-JTKT is available now and will be included in Metra’s Jeep® accessories and iBEAM training sessions at KnowledgeFest in Orlando.

Product Specifications

  • Direct OE replacement camera for 2020-up* Jeep® Gladiator JT
  • Resolution: 550 TV lines
  • Field of view: 160 degrees horizontal, 185 degrees diagonal
  • Rated IP68
  • High-performance power circuit
  • Camera extension cable included (26ft length)
  • Two types of ABS mounting brackets included
  • Does not retain the 360 surround view system in vehicles with this option

*See iBEAMusa.com for up-to-date, vehicle specific information.

At Metra, 12-volt installation and integration is our passion. We strive to continuously offer the highest quality products to meet the fluctuating technological challenges of the automotive world. We actively listen to our customers’ requests and invest resources in developing the highest quality dash kit and harness solutions. We make dash kits for more vehicle applications than anyone else in the world. That’s why we’ve been known as “The Installer’s Choice” ® for more than 75+ years. Our other brands include: Axxess®, T-SPEC®, The Install Bay®, Heise LED Lighting Systems®, iBEAM Vehicle Safety Systems®, Shuriken High Performance Batteries®, Raptor®, Ballistic®, AmmoTenna®, Metra PowerSports®, Saddle Tramp®, Metra Marine® and Daytona Lights®. Metra’s expertise in connectivity solutions is also applied to its division of premium AV and surveillance products from MetraAV™. For ordering information and pricing, visit Metra Electronics online at MetraOnline.com or call 386-257-2956.

Holly Hill, Fla. – November 17, 2020 – iBEAM Vehicle Safety Systems® by Metra Electronics® launched new aftermarket automotive safety products at SEMA360 that provide reliable OE-quality upgrades with easy to install options. Now shipping are two new ADAS products; a universal parking sensor system that requires no drilling, along with a two-way blind spot and lane change alert system that can be installed without removing the bumper. iBEAM is also now shipping a new wide-angle camera, a 1080p dash camera, and third brake light cargo cameras for Chevrolet/GMC and Ford trucks.

Two-Way Rear Blind Spot and Lane Change Alert System

iBEAM’s new rear two-way blind spot detection kit brings high-tech safety without the lengthy installation. The TE-BSM2 is mounted entirely inside the vehicle with one sensor mounted on the rear windshield, providing a clean and easy installation that eliminates the need for bumper removal. Unlike other systems, everything is built into a single sensor for an easy DIY installation, with no additional control modules or parts needed. This system provides both audible and visual alerts for rear blind spot detection within a 65.5ft field. An LED visual-only alert is shown if there is a vehicle in the blind spot and then the visual and audible alert is triggered if the blinker is on and a vehicle is in the blind spot, alerting the driver immediately.

No Drill Two-Sensor Parking System

Without drilling into the bumper, iBEAM’s new two-sensor parking solution, the TE-2PSK, provides enhanced accuracy and easy installation. Its reliable technology uses a higher frequency than current sensors on the market to allow for a more precise 3-foot sensing field with fewer false triggers. The TE-2PSK has everything built into the sensors with no additional control modules or parts needed, resulting in an easy to install kit that doesn’t require drilling into the bumper - simply mount the sensors and run wires. A three-zone setup for audible alerts helps drivers navigate difficult parking situations with ease. Designed for rear plastic bumpers.

Wide Angle Camera

iBEAM’s TE-190 is a 190-degree wide-angle camera that provides more visibility due to its larger field of view. This camera lens is adjustable, it is rated IP69, and has selectable parking lines. The resolution is 600 TV lines, it has a minimum illumination of 0.01 lux and can be mounted in the front, rear, or side of the vehicle.

1080p Dash Camera

The TE-DVR1080 is a new suction-cup mounted dash camera that is powered by a cigarette adapter, allowing for an easy to install solution. It has 1080p resolution at 30 fps and a 150-degree wide-angle lens. The 2-inch LCD screen shows menu options to allow the user to take video, photos, or playback media on the screen, with motion detection and parking mode features available. The G-sensor will lock video recordings if a crash is detected to avoid overwriting video footage in the event of an accident.

Third Brake Light Cargo Camera Frames

Two new third brake light cargo camera frames are now available from iBEAM. The TE-3BLCFD is designed for 2015-2020 Ford F-150, 2019-2020 Ford Ranger, and 2017-2020 Ford Superduty trucks. The TE-3BLCGM is designed for 2014-2020 Chevrolet Silverado and 2014-2020 GMC Sierra trucks. These frames add a blind spot/cargo camera to the third brake light of the vehicle with 480 TV lines resolution, selectable parking lines, and a 136-degree horizontal field of view. Both of these cameras are rated IP69 and improve rear visibility, allowing the driver to keep an eye on their cargo and rear blindspot areas.

All of these new products are now shipping with additional details available at iBEAMusa.com.

At Metra, 12-volt installation and integration is our passion. We strive to continuously offer the highest quality products to meet the fluctuating technological challenges of the automotive world. We actively listen to our customers’ requests and invest resources in developing the highest quality dash kit and harness solutions. We make dash kits for more vehicle applications than anyone else in the world. That’s why we’ve been known as “The Installer’s Choice” ® for more than 73 years. Our other brands include: Axxess®, T-SPEC®, The Install Bay®, Heise LED Lighting Systems®, iBEAM Vehicle Safety Systems®, Shuriken High Performance Batteries®, Raptor®, Ballistic®, AmmoTenna®, Metra PowerSports®, Saddle Tramp®, Metra Marine® and Daytona Lights™. Metra’s expertise in connectivity solutions is also applied to its division of premium home theater and surveillance products, Metra Home Theater Group®. For ordering information and pricing, visit Metra Electronics online at MetraOnline.com or call 386-257-2956.

Holly Hill, FL - April 2018 – iBeam Vehicle Safety Systems by Metra Electronics® has released a new DVR kit that simultaneously captures video in both the front and rear of the vehicle, with infrared assisted night vision on the front camera. The TE-IFD kit will improve driver visibility, both day and night, supporting 1080p HD recording in the front and 720p recording for the rear camera. For front night vision recording, 720p is supported.

iBeam’s latest DVR kit connects to the vehicle display from the DVR’s video RCA output. Drivers can select to view the front day, front night, or rear-view camera feed. This kit also connects to a smartphone, where users who are connected to Wi-Fi can view a live recording of the vehicle’s surroundings via the free mobile app, available for Apple and Android devices. The mobile app also allows the user to adjust settings or view videos and pictures recorded from the DVR.

For security purposes, a motion sensor can be activated to monitor activity while the vehicle is parked and left unattended*. A built-in g-force sensor detects collisions and locks the captured video content to prevent it from being overwritten. This is especially useful in the event of an accident, where video recordings can be used as potentially vital evidence.

The high-tech TE-IFD kit includes an infrared LED bar that mounts behind the front license plate to improve night recording, a control box, front camera with night vision, rear camera, infrared driver, Wi-Fi USB cable and power/switch button. The kit installs seamlessly into any vehicle application while maintaining an OEM-style look and feel. Learn more about iBeam Vehicle Safety Systems at iBeamUSA.com.

*Installers should read the instruction manual on how to enable or disable the motion detection function, as the software will need to be updated. The instruction manual can be seen at: http://metraonline.com/files/products/TE-IFD_Manual.pdf

At Metra, 12 volt installation and integration is our passion. We strive to continuously offer the highest quality products to meet the fluctuating technological challenges of the automotive world. We actively listen to our customers’ requests and invest resources into developing the highest quality dash kit and harness solutions. We make more dash kits for the most vehicle applications than anyone else in the world. That’s why we’ve been known as “The Installer’s Choice®” for over 70 years. Our brands include: Axxess®, T-Spec®, The Install Bay®, Heise LED Lighting Systems®, iBeam Vehicle Safety Systems®, Shuriken High Performance Batteries®, Raptor®, Ballistic® and AmmoTenna®.  Metra’s expertise in connectivity solutions is also applied to their division of premium home theater and surveillance products, Metra Home Theater Group®.

For ordering information and pricing, visit Metra Electronics online at MetraOnline.com or call 800.221-0932. For Metra Home Theater Group ordering information and pricing, visit MetraHomeTheater.com or call 866.839.9187.

Holly Hill, FL – September 13, 2018 – Metra Electronics®, the leading manufacturer of aftermarket automotive solutions, introduces the new TE-STM98 by iBEAM Vehicle Safety Systems®. This kit includes a live video streaming rearview mirror monitor, backup camera, forward-facing camera, and HD DVR to provide a high-tech safety upgrade that improves driver visibility. Additional convenience features include an integrated compass and clock, built-in speaker for DVR playback and a reverse trigger for the backup visual.

High-Quality Rearview Mirror with 9.8-Inch Built-in Monitor and Forward-Facing Camera - The rearview mirror provides the driver peace of mind by giving them the exact same view they would have as if they were standing outside of the vehicle. At 60 frames per second, the full-sized touchscreen monitor provides a fluid visual with almost no lag, thanks to the LVDS signal. The built-in forward-facing camera has a 170-degree view with 1080p resolution.

Rearview Camera - The kit includes a dedicated 1080p HD rearview camera with a 130-degree viewing angle. This outside mounted camera increases the field of vision by an estimated 300 percent over traditional rearview mirrors.

1080p HD DVR - The DVR can automatically record both the forward-facing and rearview camera simultaneously while driving. It also offers a menu option to start and record any activity (forward and rear) for the amount of time selected by the user. While this DVR supports up to 64GB of storage on a Micro-SD card (sold separately), it is also equipped with a G-sensor that activates in the event of a collision to lock in the recording, preserving potentially vital video evidence of the accident. The built-in GPS antenna also provides a DVR timestamp for additionally critical video evidence.

Installation Accessories - A universal footprint mount is included to allow an easy and seamless install. (Use the TE-M06 to work with other vehicle applications, sold separately. Vehicle-specific options are available for Ford, GM, Honda, Hyundai, Toyota, Kia, Subaru, VW, Mercedes, Fiat, Iveco, and Peugeot.)

This TE-STM98 is now shipping, visit iBeamUSA.com for additional details.

TE-STM98 Specifications

  • Replacement mirror with 9.8-inch touchscreen built-in monitor
  • 1080p HD DVR recording
  • Integrated compass with clock
  • Real-time rearview visual at a 130-degree viewing angle
  • Built-in speaker for DVR playback
  • Universal footprint mount included (if the vehicle does not have a universal footprint, installers need to use the TE-M06, sold separately)
  • 1080p HD rearview camera included
  • Reverse trigger for backup visual
  • GPS antenna for DVR timestamp
  • Allows up to a 64GB SD card (TE-16SD available, sold separately)
  • 60 fps LVDS digital signal at the rear camera for less lag and a fluid visual

At Metra, 12-volt installation and integration is our passion. We strive to continuously offer the highest quality products to meet the fluctuating technological challenges of the automotive world. We actively listen to our customers’ requests and invest resources into developing the highest quality dash kit and harness solutions. We make more dash kits for the most vehicle applications than anyone else in the world. That’s why we’ve been known as “The Installer’s Choice” ® for more than 72 years. Our other brands include: Axxess®, T-Spec®, The Install Bay®, Heise LED Lighting Systems®, iBEAM Vehicle Safety Systems®, Shuriken High Performance Batteries®, Raptor®, Ballistic®, AmmoTenna®, Metra PowerSports®, and Metra Marine®. Metra’s expertise in connectivity solutions is also applied to its division of premium home theater and surveillance products, Metra Home Theater Group®. For ordering information and pricing, visit Metra Electronics online at MetraOnline.com or call 800.221-0932.

Copyright - Mobile Electronics Association 2020

Top Desktop version