Mobile Electronics Magazine

Switch to desktop

12-14-2016, Mobile Electronics -- As the mobile electronics industry evolves, 12-volt manufacturers and retailers are constantly addressing the product categories that are most effective, those that are underperforming, and most importantly, the ones which represent where the business is headed.

None of that is lost on Bob Goodman, Director of Sales and Marketing, for Torrance, Calif.-based Rydeen Mobile Electronics, an aftermarket manufacturer that counts vehicle safety and convenience products among its core competencies.

“One of the challenges the 12-volt industry is facing is that we’re getting away from speakers and amplifiers, something we’ve been doing for 40-plus years,” Goodman said. “These days, the challenges of driver safety are becoming far more critical. If you make a mistake on the road or while driving, you could lose lives. If someone’s radio doesn’t work correctly, no one dies. It’s important that we get this right the first time—not the second time.”

Goodman, who considers himself an ambassador of sorts for the vehicle safety category, is trying to get the word out about its importance—not just to retailers, but to the industry as a whole. He may have more of a chance to do that, now that he’s been recently elected to the Vehicle Technology Division board of the Consumer Technology Association (CTA). Its key initiatives are to raise consumer awareness of automotive technologies and installation, and to serve as a leading voice on safe driving and vehicle-related legislative and regulatory issues.

“The challenge for us as a manufacturer is to create awareness within the category,” Goodman said. “The 12-volt retailers have not globally embraced this category, but they are starting to get it.”

In 2015, more than 38,000 people died in motor vehicle crashes, according to the National Safety Council. According to the Council’s annual report on unintentional injuries, the three biggest causes of fatalities on the road included alcohol (30.8 percent), speeding (30 percent), and distracted driving (26 percent).

All of the new technology in vehicles is causing more driver distraction behind the wheel than ever before, but part of it stems from the fact that 53 percent of drivers believe if manufacturers have loaded all this entertainment into their cars, then it must be safe.

Enhancing car security systems for occupants as well as pedestrians has become a greater priority for automakers worldwide. It also presents tremendous potential for aftermarket manufacturers.

 “We have shored up our resources and we’re adding new products that will get traction with consumers,” Goodman said.

Blind Sight

At the Specialty Equipment Manufacturers Association (SEMA) show held last month, Rydeen showcased four new products—three of which represented new product categories for the company.

One of the key introductions, according to Goodman, is the BSS1, the Blind Spot Detection System, with an MSRP of $599. “We have been selling side cameras as a solution for the blind spot issue, but we came up with an alternative in terms of sensors,” he said.

For the most part, Goodman explained, vendors use ultrasonic sensors for these types of blind spot devices that are similar to what is used for parking sensors. It has been the only alternative, until recently.

“Now we’re starting to see more microwave radar systems, which are far more accurate and easier to install for the 12-volt specialty retailer,” Goodman said. Rydeen’s new system employs microwave technology to warn drivers of any vehicles within their blind zones and, Goodman added, is more accurate than competitors’ systems employing ultrasonic sensors. The two compact microwave sensors mount behind the bumper, eliminating drilling into the bumper of the vehicle. Alerts are displayed with mini LED icons on each A pillar and a buzzer mounted behind or under the dashboard.

With installation being less complicated, it may open up more opportunities for the category. “In talking to installers and retailers over the last two to three years, blind spot detection is one of those things that the OE has offered on higher-end vehicles and parts of technology packages,” Goodman said. “The consumer is aware of it and has asked about it, yet many retailers we’ve spoken to have shied away from it because it required drilling into the vehicle. First of all, that can be time consuming, but the other issue was, if the consumer didn’t like the result, if their expectations and what the product actually delivered were not in sync, then they had an issue that there were holes in their vehicle that had to be addressed.”

Read the rest of the article HERE.

TORRANCE, CA. – December 10, 2018 – Rydeen Mobile Electronics is proud to announce the all new Roadgear RBC1 advanced second-generation radar blind spot detection system with built in rearview camera. The system can be installed on any passenger or commercial vehicle, offering superior safety with state-of-the-art protection in today’s driving environment!

The Roadgear RBC1 Radar Blind Spot Detection System with backup camera uses microwave radar technology with highly accurate Doppler effect sensing for distances of up to 35 feet for detecting objects within the driver’s blind spot. This microwave system provides the driver a flash warning when there are vehicles approaching either in the driver's left or right blind spot. Advanced second-generation radar sensors within the unit provide much more accuracy than previous ultrasonic based sensor solutions from other companies. The system also uses GPS to initiate the operation above speeds ranging from 5/10/15/20 MPH that is user selectable, thus eliminating potential faulty alerts in slow moving environments such as parking lots. Unlike other systems, the RBC1 requires no drilling or removal of a vehicles bumper for installation. RBC1 installs on the top or bottom of a vehicle’s license plate. The unit has an alloy metal frame that holds two microwave radar sensors, with a waterproof plastic housing and a built in high dynamic range rearview camera. This system will also work on vehicles with metal bumpers, giving millions of vehicles the additional coverage needed. Trucks and commercial vehicles with metal panels that never had an option for aftermarket blind spot systems before can now take advantage of this advanced technology. In addition, the system includes an advanced algorithm for cross traffic detection--perfect for use in parking spots when cars are quickly approaching while backing up!

The RBC1 features include:

  • Second generation doppler effect radars sensors that are immune to the adverse effects of temperature, weather and road conditions to provide maximum safety.
  • Reverse cross traffic protection for backing out of parking spaces.
  • GPS functionality to eliminate false alerts in slow moving conditions.
  • Audible and visual alerts for vehicles within the drivers “Blind Spot”
  • Dynamic range rear view camera for a better total view while backing up.
  • The only solution for trucks and commercial vehicles where other blind spot systems are not an option due to metal panels and sensor position options.
  • Seamless integration in a totally self-contained unit for ease of installation.
  • Expert tech support from Rydeen’s dedicated support staff.

Rydeen Mobile Electronics, a manufacturer of Roadgear products for the automotive aftermarket, will be exhibiting at CES 2019 in Las Vegas, LVCC North Hall Booth #5606. For more information on Roadgear & Rydeen’s featured products, visit us at www.roadgearmobile.com and www.rydeenmobile.com.

As a result of continued growth and the introduction of technically advanced products Rydeen Mobile has created a new position and hired industry pro, Jordan Shahriary

TORRANCE, CALIF. – May 1, 2016 --  Rydeen Mobile Electronics announced that it has hired industry professional Jordan Shahriary as Technical Services Coordinator, a newly created position that will enable Rydeen to further support its existing dealer and distributor network.

Jordan's 10 year career in Mobile Electronics includes various sales, tech support and installation positions, most recently with Al & Ed's Autosound's in Southern California. Jordan has had hands on experience designing and selling solutions utilizing Rydeen Mobile products at retail during the past few years.

"Jordan's addition will provide a boost to our sales and technical support efforts both internally and in the field," said Bob Goodman, director of sales and marketing for Rydeen. "Jordan will work with our current team to improve existing systems to better serve our installers, retail & distributor salespeople, manufacturers representatives and consumers seeking solutions with our products. Jordan will not only be part of our technical support department, he will also be out in the field training our dealers, distributors and manufacturers representatives to support their sales efforts."

Additionally, Sharhriary will develop training materials, including video and PowerPoint presentations that will be accessible from our recently updated website, Goodman added. 

Latest Camera in Advanced Vehicle Technology Series features SuperWide Selectable Viewing

TORRANCE, CALIF. – August 1, 2016 -- Rydeen Mobile Electronics has announced it is now shipping the latest product in its Advanced Vehicle Technology series. The much anticipated CM-180SW SuperWide Camera is now arriving at Dealers and Distributors.

"Our CM-180SW may appear to be an ordinary vehicle camera but it's not, says Bob Goodman, Rydeen Mobile's Director of Sales & Marketing. We designed it so it has the same form factor as all our MINy Series cameras, insuring it will snap into our highly popular BL01 Hidden License Plate Bracket." Drivers of all vehicles can now get "The Whole Picture", front or rear, when parking or leaving a parking spot, day or night.

This camera has a 180° Viewing Angle with 6 selectable view options - Front, Rear, Left & Right, Rear & Top, Left, Right & Top and Full Forward. Views are selectable by a user controlled button. The CM-180SW has an Ultra HD CMOS Sensor enabling a resolution of 580 Lines and features CMOS II NightVision Technology yielding an extremely low <0.01 Lux Rating. These category leading specifications make it comparable to our top selling MINy HD camera. Housed in ABS it is Waterproof and as with all Rydeen cameras it has a 3 Year Warranty, added Goodman ". The Rydeen CM-180 SW Super Wide Camera has an MSRP of $250.

Rydeen Mobile Electronics announced the receipt of two prestigious Innovation Awards in the Vehicle Intelligence category.

"Our PVR15W and MD4BT are both honorees and will be on display at the Innovations Award Showcase in Booth 83319, Hall G, Level 1 at the Sands Convention Center,” says Bob Goodman, Rydeen Mobile's Director of Sales & Marketing. Both products are currently available and offer drivers advanced technology solutions for avoiding accidents caused by driver distraction. "This is a tremendous honor for Rydeen and validates our position as a leader in Vehicle Safety,” adds Goodman. Unlike “OFF THE SHELVES PRODUCT” available from any other company, Rydeen built the products from the ground up, utilizing high quality components and heavy testing conditions to ensure reliability.

The PVR15W incorporates the latest technology including Optical Recognition of the road ahead of your vehicle, making the unit a 3 in 1 solution that features Advanced Front Collision Warning, Lane Departure Warning and a full feature DVR with GPS and G-sensor, a combination of features not found even in the most expensive vehicles, all in a compact package with a consumer friendly MSRP of $499. With all of its advanced features and ability to be played back on any device, the PVR15W can truly be a life saver.

The MD4BT is another 3 in 1 solution housed in a Rear View Mirror featuring a 4.3" LCD screen. It features a Rear Camera Input to enhance safety awareness, Bluetooth for hands-free driving and Mi-Link digital inputs (HDMI/MHL) for connection to a Smartphone (Android or iOS), all without sacrificing picture quality through the high definition WGVA screen. While connected, the MD4BT screen displays the connected Smartphone's screen output for convenient and safe viewing, therefore avoiding driver distraction. The MD4BT employs a proximity sensor for activating commands by hand motion and voice commands such as SIRI and Google Now. It also can playback audio from a microSD (not included) through the line-out option to hear sound from car speakers. MSRP is $299. 

Torrance, Calif. – January 7, 2019 -- Rydeen Mobile, the leader in mobile electronics innovations and Advanced Driver Safety Systems (ADAS), is proud to announce the development of the world’s first self-speed sensing radar blind spot detection system without the use of vehicle speed sensor or GPS. Rydeen mobile has developed the new BSS2x Ultra Advanced blind-zone detection system.  The next generation of system based on Rydeen’s years of product history starting with BSS1 then recently released BSS2 and BSS2LPB (License plate bar) along with the BSS2LPBC (bar with a built-in camera). The BSS2LPBC has been awarded the Innovation Award at this year’s CES.

This new BSS2x system incorporates the latest in high output radar sensing technologies that greatly improves the accuracy and detection range.  The system has been designed to equal or exceed OEM factory specifications that is easy to install in an aftermarket environment. “The new BSS2x also detects when your car is coming up on others in traffic, so you will get a warning when coming up and passing vehicles as well.  While we always recommend the safe use of mirrors, with the BSS2x will almost make them obsolete,” said Phil Maeda, president and CEO of Rydeen Mobile Electronics.

The BSS2x uses sensor technology to detect vehicle speed rather than GPS or a connection to the vehicles speed sensor through the CAN/OBD in-vehicle network. This provided ease of installation and the system is always ready and does not have to wait for a good GPS lock required in older systems. The system will not alert in situations under 15 MPH that can be annoying in slow moving traffic and parking lots.

The unit is expected to ship in March 2019 at an MSRP price of $ 899.00.

Features:

  • Self-speed detection without the use of GPS or OBD2, using 2-way (1-transmitter, 2-receiver) sensing technology offering the ability to detect vehicles up to 80-feet behind even when the range is closing quickly
  • Detects when your vehicle is approaching others from behind issuing a programmable warning until it is safe.
  • Superior to OE products in both sensitivity and performances.
  • Represents exactly the same product behavior found in OEM Blindspot detection radar installed on high-end new vehicles.

Rydeen is a premier supplier of safety, lifestyle and convenience products for the automotive aftermarket, continuing its leadership role in in-vehicle electronics product innovations.

Please visit Rydeen at CES North Hall booth #5606.                                                                                               

Without change, there is no innovation. Rydeen is the leader in mobile electronics focused on creating products with the latest in science and technology, changing people’s lives one day at a time. Rydeen commits to the latest in technology through a scientific, industrial processes and product validation. Headquartered in Torrance, Calif., with a local staff that lives and breathes consumer electronics, we create unique products focused on driver safety, convenience and lifestyle enhancement. Visit our website at www.rydeenmobile.com.

Torrance, Calif. – September 27, 2018 -- Rydeen Mobile, the leader in mobile electronics innovations and Advanced Driver Safety Systems (ADAS), is proud to announce the introduction of BSS2, the second generation radar blind-spot detection system. This new product is the advancement of accuracy and features from the reputable BSS1 radar blind-spot detection system introduced over a year ago. This new system incorporates the latest in radar sensing technologies; it greatly improves the accuracy and detection range of the system and adds true cross traffic detection when reversing from a parking stall. The BSS2 system has been designed to equal or exceed OEM factory specifications in an aftermarket solution.

The system incorporates the following new features:

  • The latest in second generation radar sensing technology.
  • Adjustable angled sensor brackets for better coverage and performance in all types of vehicles and customized applications.
  • Supplied angle tools - Two angle tools are now included to facilitate finding optimal sensor angles for customized applications. 20° for a wider detection area or 17° for a narrower more defined detection area.
  • GPS with selectable speed restriction (5/10/15/20 mph) to eliminate triggers in low speed high traffic areas such as parking lots similar to OEM systems.

This new system will allow aftermarket installers to achieve the same quality blind spot detection as many OEM factory installed systems.

“This will help our dealers and expediters offer superior safety systems to many vehicles that are not equipped with these systems from the factory and will offer these lifesaving systems to older cars that were produced before this technology was available," stated Phil Meada, President and Principle of Rydeen Mobile.

The BSS2 will be available at all Rydeen dealers, distributors and expediters in October 2018 and has an estimated MSRP of $749.

For more information, please contact your Rydeen Mobile representative or visit us at www.rydeenmobile.com.

Without change, there is no innovation. Rydeen is the leader in mobile electronics focused on creating products with the latest in science and technology, changing people’s lives one day at a time. Rydeen commits to the latest in technology through a scientific, industrial processes and product validation. Headquartered in Torrance, Calif., with a local staff that lives and breathes consumer electronics, we create unique products focused on driver safety, convenience and lifestyle enhancement. Visit our website at www.rydeenmobile.com.

Torrance, Calif. – January 7, 2019: Rydeen Mobile, the leader in mobile electronics innovations and Advanced Driver Safety Systems (ADAS), is proud to announce the introduction of new camera products at CES 2019.

Rydeen invented and introduced the small diameter mini-din cable connector about 10-year ago, which greatly improved the installation efficiency, shortened the backup camera installation time, installers no longer need to worry about making a hole big enough to run a RCA video connector through the vehicle body panel.

Rydeen innovated the cube camera picture quality by introducing MINy HD 7-year ago, is innovating the camera wire harnesses this year. “We are introducing the Quick Disconnect wire harnesses that allows installers ease of replacing the voltage reducer found in today’s camera products,” said Phil Maeda, president CEO of Rydeen Mobile Electronics. "Today’s Rydeen cameras became so much more reliable, due to the use of lower voltage operating CMOS sensors. Compare it to more than 10 years ago, when cameras were driven by 12-volt directly, thus easily burned camera modules due to overheating, therefore, we invented the short camera pig-tail cable with mini-din connector, allowed the ease of exchanging cameras."

"In recent years," Maeda continued, "in-line voltage reducer found on backup camera harness, may have caused issues under long hours of continuous operations, so we came up with the idea of “Quick Disconnect” so installers do not need to pull out entire wire harness from a vehicle."

“The advantage is very clear, with the use of higher gauge copper cable and added trigger lines and the introduction of the Quick Disconnect idea, the difference is clear!” said Jeramiah Mayeda, an owner at Al & Ed’s Autosound Lawndale Store. “Rydeen cameras are number one in quality and with the new Quick Disconnect wire harnesses, would ensures the peace of mind when installing cameras to our valued customers, even if anything may happen down the road, it would be quick to service customers."

Quick Disconnect wire harnesses are found in below camera models:

CM-HD4 --- The top of line HD MINy (960 TV Lines) camera with Quick Disconnect Wire Harness Mirror/Positive image.

CM-MINy3 --- MINy Camera with Quick Disconnect Wire Harness with Mirror /Standard Image & Parking Line On/Off Options

CM-APL3 --- MINy Camera with Trajectory Parking Lines with Quick Disconnect Wire Harness Mirror Image Only, White LED’s for Night Vision

CM-LED4 --- Infrared/Invisible LED illuminated MINy Camera with Quick Disconnect Wire Harness with Mirror/Standard Image & Parking Line On/Off Options

CM-DUO3 HD --- HD (960 TV Lines) Stud Mount Camera with Quick Disconnect Wire HarnessMirror/Flip Image, Parking Line ON/OFF Options

CM-LIP3 APL --- HD LIP (580 TV Lines) Camera with Trajectory Parking Lines with Quick Disconnect Wire Harness, Mirror/Standard Image, Active Parking Line ON/OFF Option

Rydeen is a recipient of the 2019 CES Innovation Award for its BSS2LPBC, the second-generation vehicle radar blind-zone detection system with built-in camera, continuing its leadership role in in-vehicle electronics product innovations. Please visit Rydeen at CES North Hall booth #5606.

Without change, there is no innovation. Rydeen is the leader in mobile electronics focused on creating products with the latest in science and technology, changing people’s lives one day at a time. Rydeen commits to the latest in technology through a scientific, industrial processes and product validation. Headquartered in Torrance, Calif., with a local staff that lives and breathes consumer electronics, we create unique products focused on driver safety, convenience and lifestyle enhancement. Visit our website at www.rydeenmobile.com.

Rydeen Mobile Electronics announced the release of the latest addition to its Advanced Vehicle Technology series. "The addition of the MD4BT Digital Mirror Monitor demonstrates our commitment to offering leading edge products that combine Safety and Entertainment for today's lifestyle," said Bob Goodman, Rydeen Mobile's Director of Sales & Marketing. The MD4BT is a 3 in 1 solution that incorporates a 4.3-inch LCD display Mirror Monitor for rear camera viewing, a Bluetooth "Hands Free" system and Mi-Link, our digital link to any Smartphone Device.

The MD4BT features Mi-Link, Rydeen's digital link system utilizing a built in HDMI connector. "Mi-Link enables any Smartphone, Apple or Android based, to output it's screen content to an ultra bright 4.3" LCD display.  The built-in Bluetooth enables Hands-Free phone calls and Audio Streaming of content available on a Micro SD Card. The Backup Camera input also has the capability to overwrite the video screen when the car goes into reverse”, added Goodman.

Safe operation is assured with a "Proximity Sensor" that activates Voice Command (Siri & Google Now) as well as Screen On & Off functions. MD4BT is a pioneer for all of Smartphone functionality within your vehicle. It allows drivers to operate their vehicle while utilizing their Smartphone in the safest way while the vehicle is in motion. MD4BT is a bridge to bring the internet to one's in-vehicle environment, and it is designed to fit thousands of vehicle applications, utilizing our patent pending windshield mounting system with many vehicle specific options available.

MHL / HDMI Adaptors for iPhone and Android based phones are available separately. MSRP is $299.00.

Las Vegas, NV (December 27, 2016) – Rydeen Mobile Electronics, manufacturer of vehicle safety and driver assistance products announces a partnership with Automotive Data Solutions. This new partnership will deliver new safety products compatible with iDatalink Maestro audio interface products from ADS.

The Maestro PS1 is a parking assistance system that can be installed as a standalone, audible assistance system or a fully integrated audio-visual system when installed with a Maestro RR radio replacement interface and compatible aftermarket radio. In the standalone mode, Maestro PS1 can be installed in a variety of applications: (1) as a rear sensor add-on (2) as a front sensor add-on, (3) with the Maestro PS2 4-sensor expansion pack as front and rear add-ons. In all cases, the Maestro "PS1" chime speaker accessory is required and sold separately.

"We are excited with this product development and manufacturing relationship with ADS", said Phil Maeda, founder and CEO of Rydeen, "We are eager to support and bring to market advanced safety systems that consumers are demanding," Maeda continues. While the Maestro PS1’s standalone applications are quite versatile, its true power is realized when installed with a Maestro RR interface and a compatible Alpine, JVC, Kenwood or Pioneer radio. This combination offers customers with older vehicles or lower trim packages a way to add technology comparable to the best factory systems available today.

"ADS seeks partnerships with leaders in their product category," said Frank Barassi, President of Automotive Data Solutions. “Rydeen is at the forefront of advanced safety systems and getting these systems into the Maestro ecosystem has been one of our top priorities.”The Maestro PS1 parking assistance system and PS2 sensor expansion pack will be available to order from existing distribution partners in early 2017. Retail prices to be announced.

The BSS2LPBC has been selected for the Innovations award in Vehicle Intelligence category.

TORRANCE, Calif. - November 11, 2018 – Rydeen Mobile Electronics announced today the receipt of a prestigious CES Innovation Award in the Vehicle Intelligence category. "Our BSS2LPBC is an honoree and will be on display in Rydeen Booth 5606, North Hall as well as Innovations Award Showcase in Booth 83319, Hall G, Level 1 at the Sands Convention Center," said Phil Maeda, Rydeen Mobile's President and founder. “This product is currently available and offers drivers an advanced technology solution for avoiding accidents caused by blind spot during lane changes."

"It is a tremendous honor for Rydeen and validates our position as a leader in vehicle safety,” Maeda added. “Unlike most “OFF THE SHELF PRODUCTS” available from any other manufacturers, Rydeen has designed and built these products from the ground up, utilizing the highest quality components and extreme testing conditions to ensure superior quality and reliability.”

The BSS2LPBC incorporates the latest radar sensing technology and can easily be added to any vehicle for the extra protection needed in todays driving environment.

The BSS2LPBC Radar Blind Spot System “the BAR” uses microwave radar technology with highly accurate sensitivity sensing for distances of up to 35 feet for detecting objects within the driver’s blind spot. The system gives the driver a warning when vehicles are located within the driver’s blind spot. This microwave system provides the driver a flash warning when there are vehicles approaching either in the left or right blind spot. Advanced second-generation radar sensors within the unit provide much more accuracy than previous ultrasonic based sensor solutions from other companies. The system also uses GPS to initiate the operation above speeds ranging from 5/10/15/20 MPH that is user selectable eliminating potential faulty alerts in slow moving environments such as parking lots. Unlike other systems, it requires no drilling or removal of a vehicle's bumper for installation.

“BSS2LPBC installs on the top or bottom of a vehicle license plate, more importantly, it works on vehicles with metal bumpers giving millions of vehicles the additional coverage needed,” Maeda said. “Trucks and commercial vehicles with metal panels that never had an option for aftermarket blind spot systems before can now take advantage of this advanced technology." In addition, the system includes a backup camera and cross traffic detection features offering the total vehicle safety solutions for vehicle drivers TODAY!

Rydeen Mobile Electronics, a premier supplier of safety, lifestyle and convenience products for the automotive aftermarket, will be exhibiting at CES 2019 in Las Vegas. All products will be on display January 8-11 in the North Hall, Booth 5606 of the Las Vegas Convention Center. For more information on Rydeen’s featured products, visit www.rydeenmobile.com. To schedule a one-on-one product tour during CES, call (877) 777-8811 to schedule an appointment.

ADAS product supplier is introducing a comprehensive restructuring of its 2019 business programs.

TORRANCE, CALIF., April 10, 2019 – Rydeen Mobile Electronics has introduced Opportunity 2019, effective April 15.

“Opportunity 2019 is precisely that; it’s an opportunity for us to reconnect with our 12-volt specialist, expeditor and distributor partners and focus on the opportunities that exist in the aftermarket ADAS category,” said Bob Goodman, Rydeen’s Vice President of Sales and Marketing. "It is my belief that 2019 is the tipping point for this category and we want to be certain that our customers are prepared to take advantage of it. Since my return to Rydeen we have been tirelessly negotiating with our manufacturing and parts partners to help us reduce costs without affecting quality or functionality. The result has been positive and we will be announcing reduced pricing on many items effective April 15th. Additionally, we will be restructuring our Profit Sharing business program for our distributor partners to increase their profitability plus a new prepaid freight program for our Premier dealers.”

Rydeen is also increasing in-store visibility with new POP and additional functional and passive displays to create consumer awareness in showrooms. Every customer is an ADAS customer, but we need to educate them and make them aware these solutions exist for their vehicles; Rydeen ADAS solutions are universal and not limited to a handful of vehicles.

“We’ve made a huge investment in R&D of sensor technology for our new Blind Spot Warning and Digital Park Assist systems and it’s paying off handsomely. Each week we receive dozens of calls from satisfied 12-volt specialists and expeditors who have tried one or another of our different solutions with excellent results. Many of these were actual replacement installs of competitors products,” Goodman added.

Rydeen further announced increased training sessions and materials will be available for their more advanced product categories with an “Opportunity 2019” installer and sales personnel certification program that will reward those certified with points for product and other incentives.

Rydeen Mobile is seeking the best of the best to take advantage of “Opportunity 2019.” Please call us for the name of your local representative if you would like to come along for the ride.

Rydeen Mobile Electronics' mission is to provide the safest vehicle driving experience with solution based products and technologies, aiming for ZERO auto accidents and auto thefts, thus creating “peace of mind everyday” to consumers worldwide! For more information, visit our website at www.rydeenmobile.com.

Torrance, Calif. – April, 2018  Rydeen Mobile just completed and unveiled a new website for Rydeen Mobile Electronics. The homepage and all the new product pages have all new graphics and are much easier to navigate than the previous website. The new site is using a new web platform which enables viewing from mobile devices with easy to use new category menus.

Go to www.rydeenmobile.com to check it out. Rydeen is placing an all new emphasis on ADAS (Advanced Driver Assistance Systems) which is clearly evident when you see the new home page with scrolling graphics and featured product categories.

All the new Rydeen products for 2018 are featured in the website including the new ADAS product which includes the BSS1LPB Blind Spot Safety System for vehicles with metal bumper applications as well as any vehicle where the bumper cannot be removed.

An entire category is focused on the new cameras including the New Black Diamond cameras lenses with low light viewing capability and Super HD resolution for detail picture reproduction with vibrant colors.

Whether you are looking for product manuals, tech support or checking out the FAQs on popular products, it is all there and is easy to navigate.

Innovation and Value aren’t usually two words you find in the same sentence, but that’s what Rydeen is all about: melding the best of today’s technology into smart, practical devices that are easy to use, and make them available to consumers at an affordable price. Headquartered in Torrance, Calif., with a local staff that lives and breathes consumer electronics, we create unique products focused on driver safety, convenience and lifestyle enhancement.

 

7-18-2017 -- Rydeen Mobile Electronics has announced the arrival of new in-store POP for retail dealers purchasing the new BSS1 Blind Spot Safety System. Available now is a counter top display easel as well as a floor standing BSS1 banner for all dealers and distributors who purchase the BSS1 system.

Soon to arrive is a retail dealer window display to assist in attracting potential new customers to the store. All of these items are provided at free of charge to support the sales of the BSS1 at the store level.

“These new POP items will be effective in creating in-store consumer awareness of the blind spot safety category and specifically the BSS1 from Rydeen” says Mike Northup, Director of Sales and Marketing for Rydeen Mobile.

The BSS1 was introduced at 2017 CES.  “It works much the same as the OEM systems using the microwave radar technology for sensing traffic approaching in adjacent lanes specifically in the driver’s blind spot” says Northup, “it sees what the driver may not see in the side view mirrors.” It comes equipped with LEDs for visual alert and a beeper for audible alert. The GPS antenna is included for increased accuracy of driver alerts by sensing speed.

As an added bonus, the BSS1 gives a cross traffic alert when backing out of a parking space. The BSS1 and the POP is now available from Rydeen Mobile. To become a dealer or to locate distributors call Rydeen at 877-777-8811 or visit our Rydeen website at www.rydeenmobile.com.

MSRP: $599

5-9-2017 -- Rydeen Mobile Electronics is now releasing its new entry-level lineup of mirrors and cameras brand, RoadGear Mobile. The new RoadGear brand which comes in stylish and colorful gift boxes, is now shipping from the Rydeen Mobile facility in Torrance, CA. 

“Rydeen has the reputation as a high quality brand of safety products, however, our customers have been asking for product with entry level price points. The new RoadGear brand gives Rydeen presence in the entry level category and will be important to meeting our customer demand and increasing market share for Rydeen,” stated Mike Northup, Director of Sales and Marketing for Rydeen Mobile.

The line-up includes three new Rear View Mirrors with monitors. 

  • RN03 is a 3.5”navigation mirror monitor with Bluetooth hands-free.
  • RB01 Bluetooth hands free mirror with 4.3” monitor.
  • RM02 low cost entry mirror with 4.3” monitor. 

All three models have inputs for a rear view back up camera.  In addition to the rear view mirrors, RoadGear includes two rear view monitors: 

  • The SM70 is a 7” monitor and the SM50 is a new 5” monitor.

Back up cameras are an integral part of the RoadGear brand, which includes the following:

  • RC1 Mini camera with HD CMOS
  • RC2 Keyhole camera with wing mount for convertible options plus HD CMOS with night vision
  • RC3 Mini LED camera with white lights for improved night vision
  • RC4 “LIP” camera with Night Vision Technology, surface mount installation, mirror image & 90 degree flip option
  • LB1 Hidden License Plate bracket
  • LP5 License Plate camera with white LEDs for Night Vision

All the RoadGear back up cameras include optional parking lines On/Off.

Also included in the RoadGear brand is a variety of commercial cameras, ultrasonic parking sensors and a huge selection of Mirror Mounting Systems and accessories.

For more information on the new RoadGear brand call the Rydeen Mobile Sales department at 1-877-777-8811.  The newwww.RoadGearMobile.com website is coming soon.

Torrance, Calif. – October 18, 2017: Rydeen Mobile Electronics announced the shipping of the new PSR4000D Digital Parking Sensor System. This system works on the rear and/or front bumper applications.  It comes standard with four (4) standard digital sensor heads that can be used for the rear and/or the front applications.   

Also available are two different additional sensor head kits. The “PSK4” comes with four standard mount sensors. The “PSK4 Flush” comes with four flush style sensors heads, to install most like OEM luxury and exotic vehicles. The digital sensors are paintable and come with a painting mask kit in the box.

“The PSR4000D gives the installer total flexibility in meeting the many potential applications. Our dealers and distributors should have no dilemma determining what kit to employ; this new system is truly a one kit fits all” states Jordan Shahriary, Rydeen’s Product Trainer.

Each sensor head comes with its own digital circuit board that can plug into any location specific position on the main unit. There are eight (8) ports that are separated front and rear as well inside and outside locations on the bumper. More importantly there are special programming options for provided external LED display, one being able to remove the distance number to mimic OEM found solutions.

The PSR4000D is shipping now and carries a very affordable MSRP of $99 not including installation. The PSK4 and PSK4 Flush kits have an MSRP of $79 each.

Rydeen Mobile Electronics, recipient of  two CES 2016 Innovation Awards, will debut many new products to augment their existing lineup of Vehicle Safety & Driver Assistance products. On display in North Hall Booth 3106 will be an array of products showcasing the latest aftermarket technologies available to consumer's vehicles for 2016 and beyond. There will be many additions to Rydeen Mobile's popular & successful Advanced Vehicle Technology series as well as enhancements to existing products.

Premiering at CES 2016:

  • PVR5D:  1080P Dash Cam with Motion Sensing. The PVR5D offers full DVR functionality plus the addition of Motion Sensing for continuous monitoring even while parked unattended.                  
  • MA4BT: Bluetooth Mirror Monitor.  The MA4BT offers a 4'3" LCD monitor and full function Bluetooth for hands free phone use. It includes 2 Video Inputs.
  • CM-SP2000P:  Pro Grade 3rd Brake Light camera replaces existing 3rd brake light for Chrysler / Mercedes Sprinter Vans. 
  • CM-NV2000P:  Pro Grade 3rd brake light camera for Nissan NV Vans.
  • CM-FT2000P:  Pro Grade 3rd brake light camera for Ford Transit Vans.
  • CM-CE 2000P:  Pro Grade 3rd brake light camera for Chevy Express Vans.
  • V7:  Mech-less Head Unit featuring Mi-Link, Rydeen's Digital Smartphone Interface that allows any Smartphone to connect via HDMI / MHL Digital Input. Includes Bluetooth, Rear Camera Input and 7" Capacitive Touch Screen.
  • MVSW8 Mirror Monitor:  Super Wide 9" LCD Screen with 2 Video Inputs.
  • CM-SW:  Super Wide Camera with selectable view options.
  • MV Series Mirrors:  MV series mirrors now feature Self- Dimming of the LCD Monitor.
  • MN312D:  Next generation Navigation Mirror features Self-Dimming Mirror with our patented "SmartGlass"  Mirror and an additional video input.
  • RY-FD-001:  Tailgate Latch Camera for Ford F150 Series Trucks.
  • RY-GM-001:  Tailgate Latch Camera for Chevy Silverado / GMC Sierra Trucks.
  • RY-RAM-001:  Tailgate Latch Camera for Dodge Ram Trucks.
  • RY-TUN-001:  Tailgate Latch Camera for Tundra Trucks.
  • RY-TAC-001:  Tailgate Latch Camera for Toyota Tacoma Series Trucks.

Rydeen will be demonstrating these products in the Rydeen's Acura NSX  located in Booth 3106 of the LVCC North Hall.  Also on display will be the newly updated RDV360 II, Surround View System, now featuring simplified calibration.

“CES 2016 is an important show for us as we kick off the new year and introduce new products to both potential and existing customers," said Bob Goodman, Director of Sales & Marketing. "It also gives us an opportunity to meet with our Manufacturers Representatives and plan our business for 2016." For more information on Rydeen’s featured products, visit www.rydeenmobile.com. To schedule a one-on-one product tour during CES, call (877) 777-8811.

Torrance, Calif. – January 7, 2019 -- Rydeen Mobile Electronics, premier supplier of advanced driver safety products (ADAS) for the automotive aftermarket, will be displaying the world’s first 360 Mirror DVR Surveillance System with built-in Blind Zone indicators. A 360-degree Panorama Surround View fish-eye camera with viewing angle of 220-degree is placed at the bottom of the interior mirror which can conveniently capture surrounding video of a vehicle’s interior as well as exterior views through windshields.

“Unlike conventional vehicle DVR systems, Rydeen’s new 360 Mirror DVR has no blind zone,” said Phil Maeda, president and CEO of Rydeen Mobile Electronics. “This is the world’s most innovative in-vehicle electronics product offered today, with a huge potential of expendabilities.” The system also features full-size 9.3-inch screen TFT with touch screen controls. “With abilities of incorporating various IoT devices, such as GPS vehicle tracking systems, Wi-Fi transmitter/receivers, external cameras, 4G/5G modems, etc., this 360 Mirror DVR can truly be the core of in-vehicle features and technologies consumers are looking for, including facial recognition technology. It becomes the platform for technologies similar to smartphones, which were invented more than 10 years ago."

Features:

  • Built-in 4K 360°Panorama Surround View Recording
  • Full View 9.3” TFT Mirror Monitor with Touch Screen
  • Multi-view Split Screen Monitoring
  • Parking Monitoring (Time-Lapse Video)
  • Using Sony 4K Hi-Res CMOS Sensor for Excellent HDR
  • Optional IoT devices connection (GPS tracking, 4G/5G modem etc.)
  • Optional Remote Monitoring Access using Cell Phone/WiFi
  • Optional Blind Zone Radar Connection
  • Digital Video Input with Reverse Tigger for Backup Camera

MSRP and availability are not yet determined. For more information, please contact your Rydeen Mobile representative at toll-free 877-777-8811 or visit us at www.rydeenmobile.com.

Without change, there is no innovation. Rydeen is the leader in mobile electronics focused on creating products with the latest in science and technology, changing people’s lives one day at a time. Rydeen commits to the latest in technology through a scientific, industrial processes and product validation. Headquartered in Torrance, Calif., with a local staff that lives and breathes consumer electronics, we create unique products focused on driver safety, convenience and lifestyle enhancement. Visit our website at www.rydeenmobile.com.

Rydeen Mobile Electronics will display solutions and conduct training sessions                                 

TORRANCE, CALIF. – August 1, 2016 -- Rydeen Mobile Electronics will be exhibiting for the first time at this year's MERA Knowledgefest 2016 with the theme, Your On Ramp To Advanced Technologies.               

This industry event is being held from August 19 through August 22nd at The Hilton Anatole in Dallas and features leading Consumer Electronics manufacturers in Mobile Electronics. Jordan Shahriary, Rydeen's National Trainer will conduct 2 Classroom Trainings on profiting from presenting and selling Rydeen's Vehicle Safety and Driver Awareness solutions. Here is the schedule for the 2 Sessions at Knowledgefest 2016.

                  Saturday August 20, 2016 @5:30Pm - 6:30Pm in “DeSoto B Room”

                  Monday August 22, 2016 @8:30Am – 9:30Am in “DeSoto B Room”

"This will be a tremendous opportunity to expose our products first hand to those retailers that do not usually attend SEMA or CES. We hope to engage Retailers in discussions on merchandising and selling the many solutions Rydeen can offer their customers.This year, more than any other, it is critical  for the 12 Volt Specialist to embrace the category of Driver Awareness and Vehicle Safety.

"With the Vehicle Manufacturers growing emphasis on Driver Awareness and Vehicle Safety it's important that Retailers and Distributors create awareness within the confines of their selling areas that the solutions we offer are available as an aftermarket option, stated Bob Goodman, Rydeen's Director of Sales & Marketing. More importantly, we need to do stress the importance of active demonstrations with potential customers. We will have promotions available that are designed specifically for the 12 volt specialist that enable them to enter this profitable and fast growing category quickly. At the event we will have our Nissan NV Cargo Van capable of demonstrating the latest items in our Advanced Vehicle Technology series. Making its debut at Knowledgefest will be the next generation of our 360 ° Surround View System, RDV360 3D.The RDV 360 now features enhanced 3D imagery and an improved calibration process. Also on display will be our newest camera, the CM-180SW Super Wide with 6 selectable viewing options and our solution for eliminating 'Blind Zones,' the Dual Side Camera CM-D500. Also on display will be a full array of existing solutions focused on Driver Awareness and Vehicle Safety." 

TORRANCE, CALIF., August 8, 2019 –Rydeen Mobile, the leader in mobile electronics innovations and driver safety, is proud to announce the release of its new website with easier navigation, enhance product offerings and a commitment to consumer awareness.

The site offers six new product category icons, making navigation easier for dealers and consumers alike. New products are showcased in an easy to navigate format that will draw attention to the benefits of the product line. 

The story line emphasizes “THE INNOVATION OF CHANGE" in the product offering that has been designed for a new era in the automotive aftermarket.

“At Rydeen Mobile we are trying to drive a further understanding and consumer awareness to our category of driver safety products. This has always been lacking in the past and our industry has not done a good job of driving consumer awareness. We will try to change that and will focus on driving business to our dealers by educating our customers, both dealers and end users, to the benefits of this category. Our site will evolve periodically in an attempt to educate the public to the benefits of driver safety products," said president and founder Phil Maeda. Our goal as a company is to bring the best products to our dealers and to further educate the buying public that these products can be expertly added to any vehicle with professional and possibly lifesaving results.

“We are innovating a category within our industry we can all be proud of. Now it’s time to get the word out to the buying public," said Oliver Grunhold, director of product planning and development. “With the help of our dedicated staff, dealers and sales representatives we will continue to innovate and push the narrative to the buying public.  Driver safety is a category we all need to be involved in." 

Rydeen mobile will be happy to show and demonstrate these products at MERA KnowledgeFest Dallas, TX, booth 1241. Please stop by and let us show you the amazing products that will change the way you think of driver safety.

At Rydeen Mobile Electronics, our mission is to provide the safest vehicle driving experience with solution-based products and technologies... aiming for ZERO auto accidents & auto thefts...thus creating “peace of mind everyday” to consumers worldwide! For more information, visit our website at www.rydeenmobile.com.

Copyright - Mobile Electronics Association 2020

Top Desktop version