Cooler more powerful intake charge for improved engine performance

Avon Lake, OH (October 26, 2016)…DEI’s CryO2 Intercooler Sprayer Kit harnesses the super cooling cryogenic properties of CryO2 to dramatically lower intake charge temperatures for more horsepower at lower long term cost than nitrous. Less expensive to purchase and refill than nitrous, this cost effective alternative for a boost in HP can be used for any vehicle including diesels that could use more power for the buck. A non-invasive system, it enhances the thermal transfer ability of the intercooler to lower air temperatures as much as 35% and as low as 50°F.

For turbo or supercharged systems, the sprayer mounts directly to the front of the intercooler and vents CO2 directly onto the cooling fins. The system can be configured to be activated by either a full WOT micro-switch, or controlled manually with a momentary push button. The complete bolt-on kit now offers an optional CryO2 adjustable duration timer switch (Part # 080203) for automatic on/off pulsing and a water sprayer kit (Part # 080140) for even greater I/C efficiency. 

CryO2 Intercooler Sprayer kit includes:

• 10 lb. tank and mounting brackets
• Cryogenic solenoid valve
• 14 ft. stainless steel braided supply line
• Full WOT and arming switches with momentary push button
• CO2 fittings and electrical hardware
• 16” x 5” front-mount intercooler sprayer and hardware
• Stainless steel zip ties

For more information about Design Engineering’s Intercooler Sprayer Kit (Part # 080108) and complete line of CryO2 products, visit www.DesignEngineering.com, call DEI at 800-264-9472 or e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.. To review the product first-hand at the 2016 SEMA show stop by booth number 20013, or at PRI visit booth #1734.

City of Avon Lake joins DEI to host free Cruise-in car show at new location

Avon Lake, Ohio (May 10, 2017)…DEI hosted its first cruise-in last year to such success that the City of Avon Lake, Ohio took notice and asked to join in for this year’s event. Combining forces, they plan to make the 2nd Annual Cruise-in the best ever with a new more visible downtown location at the Weiss Field.

Like last year, there will be a collection of hot rods, lifted trucks, classics and race cars to view. Many Team DEI race teams will be on hand to show off their race cars and talk to the public.

The event, free and open to the public, is scheduled for Saturday, June 10 beginning at 10 a.m. and concluding at 5:00 p.m. at a new location - Weiss Baseball Fields located at 33401 Webber Rd. A rain date has been set for Sunday, June 11 in the event of inclement weather.

The GeezCats will provide musical entertainment featuring classic songs of the pre-Beatle days of the late 50s and 60s, followed by entertainment from Its Show Time D.J. services. Later in the day, Revolution Pie, a popular Beatles tribute band will perform. Jones Bones BBQ will be on site with tasty barbeque. Also this year, the cruise-in will feature Fountain Blue Food Trucks, Brick Oven Pizza, and an ice cream truck for cool delicious treats. Like last year there will be raffles, dash plaques, and DEI merchandise available for sale in a new and improved vendor area.   A 50/50 raffle will be held during the Cruise-In to benefit the Love-A-Stray Animal Shelter.

Tom Miller, DEI director of marketing and sales, says, “Last year’s event was a phenomenal success. We are very appreciative of the support we have from the City of Avon Lake. Our goal to build on this event every year and connect with all the enthusiasts we have in Ohio that have a passion for automotive.”

For more information about DEI’s Cruise-In event, visit www.DesignEngineering.com, call 800-264-9472, or e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.. To keep up with the very latest DEI product introductions and company news connect on Facebook, Twitter, Pinterest or subscribe to DEI’s You Tube channel.

Avon Lake, Ohio (March 13, 2017)…Design Engineering has invited racers from all series and level of participation to become a member of TEAM DEI. The Team DEI sponsorship program includes all levels and series of grassroots racing and all vehicles – truck, car, kart and powersports.

As a member of Team DEI, sponsored participants receive discounted product and merchandise in exchange for promotion of DEI products inclusive of all the company’s brands: DEI, Boom Mat, CryO2, Radiator Relief and DEI Powersports. The sponsorship agreement with DEI and the racer/race team is for one year and concludes at the end of the calendar year.

To apply for TEAM DEI an application for acceptance is required in the form of a proposal package. The proposal package should include driver/owner contact information, driver/rider resume, vehicle information including photos, specifications, all modifications to the vehicle, and information about the transporter, driver, and owner.

The proposal should also include the year’s show schedule, past media coverage or expected media coverage, and how the owner/rider will promote DEI. As with all sponsorship programs, there is a commitment to provide win updates, and how the DEI decals will be applied to the vehicle. Monthly follow-up emails are required. If accepted, updates of shows and race events can be submitted online. Also, participants must sign an authorization to allow DEI to use the person’s name and image for potential advertising or literature.

Dan Stark, DEI Team manager says, “As the industry’s leading supplier of heat and sound control products for racers, street performance enthusiasts and hobbyists, we are always looking for ways to mutually support grassroots motorsports and promote our brands at events and on the track. This has been a highly successful program and one that we believe has the greatest benefit in terms of on-site promotion.”

To begin the process to be a sponsored member of TEAM DEI, simply fill out the online form at DesignEngineering.com, or download the application as a PDF and fax to 440-930-7967. Each sponsored racer or builder will receive DEI decals, and a DEI tee shirt and hat.  

For more information about DEI’s race sponsorship program, or DEI products, visit www.DesignEngineering.com, call DEI at 800-264-9472 or e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.. To keep up with the very latest DEI product introductions and company news connect on Facebook, Twitter, Pinterest, or subscribe to DEI’s You Tube channel.

Avon Lake, Ohio (March 23, 2016) -- Design Engineering, Inc. has announced the company’s inaugural Cruise-In car show planned for Saturday, June 18 at the company’s headquarters at 604 Moore Road, Avon Lake, OH. DEI is located three miles from Interstate 90.

The event begins at 10 a.m. and concludes at 3 p.m. This show will bring some of the area’s most exciting custom cars and hot rods to DEI as part of the 2016 Cruisin’ Times Lucky 7 Road Show.

“DEI is very excited to host this custom car show at our facility. In the past we enjoyed hosting a stop for race cars and drivers who were competing in the annual Tire Rack’s One Lap of America and invited the local community and media to visit the event at the DEI facility," said Tom Miller, DEI’s V.P. of Marketing and Sales "That event was so successful that we wanted to develop more events that will allow DEI to share our passion with others.”

A 50/50 raffle will be held during the Cruise-In to benefit the Friendship Animal Protective League in memory and deep respect for Ken Moore, a prior DEI employee who lost his battle with cancer in February.

The DEI Cruise-In will include music provided by Its Show Time D.J. services, great barbeque with all the fixin’s can be purchased from Jones Bones BBQ, raffles, DEI T-shirts and hats will be for sale and a scratch and dent sale area will be open.   

A rain date has been set for Sunday, June 19 in the event of inclement weather. Admission and parking is free for this public event.

For more information about DEI’s Cruise-In event, visit www.DesignEngineering.com, call 800-264-9472, or e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.. To keep up with the very latest DEI Cruise-In announcements, connect with DEI at Facebook.com/DEIcruisein.

Avon Lake, Ohio (April 13, 2016)…DEI’s Exhaust Wrap Kit is designed to wrap a set of small block or V-6 headers in one package. The kit includes two rolls of 2-inch by 50 ft. wrap designed to protect up to 1500° F, one can of HT Silicone Coating that coats, protects and preserves the wrap after installation, and eight 8 inch and four 14 inch 304 Stainless Steel Locking Ties to ensure long-lasting durability and hold. A free Locking Tie Tool is included to lock the ties tight and works with any ¼” drive. DEI’s stitched-in wrap guide line protects against overlapping for a professional and tight fit.

"Easy to install," this kit is recommended to use whenever there is a need to reduce underhood temperatures, improve exhaust flow, or protect against potential burns to arms and legs such as on motorcycles, ATVs or UTVs, according to the company.

DEI now offers its popular all in one kit in multiple combinations of wrap color and silicone coating colors including: tan wrap and white coating (#010091), tan wrap and aluminum coating (#010093), and black wrap and black coating (#010094).

For more information about DEI’s Made in the USA Exhaust Wrap Kits, visit www.designengineering.com, call 800-264-9472, or e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.. To keep up with the very latest DEI product introductions and company news connect on Facebook, Twitter and Pinterest, or subscribe to DEI’s You Tube channel.

The Onyx Series™ Flexible Heat Shield is DEI’s next generation of heat protection performance.  Using a combination of advanced textiles and a reliable standoff bracket design, the ONYX Series™ Flexible Heat Shield with its rich, black finish, provides maximum cooling and heat dissipation; preventing heat soak and burns.

DEI’s new Onyx Series Heat Shield joins two durable materials together to form a dual-layer design. The outer layer is a heat-treated glass fiber impregnated with molten aluminum that is formed into a tight weave for durability and strength. The inside material is a specially treated, high temperature resistant fabric (89% silica) that withstands extreme heat – up to 1350°F.  The outer edge features a surge stitch and all hardware is stainless steel.

This proprietary textile technology combined with DEI’s unique standoff stainless steel bracket stand-off design provides maximum cooling and heat dissipation. Designed to be flexible, the shield fits many different applications and pipe diameters. In addition to use as a protective barrier on exhaust pipes, auto or motorcycle, the shield is recommended to use as a heat barrier between transmissions, brake lines, hoses, electrical wiring, gas tanks, body panels, bumpers and more. 

For more information about the Onyx Flexible Pipe Shield, part # 010496, visit www.DesignEngineering.com, call DEI at 800-264-9472 or e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.. To keep up with the latest new thermal performance products from Design Engineering, Inc. (DEI), like us on Facebook, or follow on Twitter.

The new EXO Series Exhaust and Pipe Wrap is a thermal wrap for headers and exhaust pipes that have repeated exposure to abrasion or high impact road or trail conditions. The EXO Series Wrap is designed to deliver both superior heat protection and resistance to harsh road, track or off road conditions, unlike any other wrap on the market today.

Developed for long-lasting durability, the EXO Series features a dual layer material constructed of high temperature glass fiber, encased in a 304 grade stainless steel exoskeleton—tough enough for the most extreme desert, dirt track or off-road conditions. With DEI’s new Air Gap technology, an insulating air barrier that keeps direct contact of the glass fiber wrap off the hot surface of the pipe, makes the EXO Series Exhaust and Pipe Wrap the preferred premium wrap for any truck or vehicle off-road or on the street.

The Exo Series Exhaust and Pipe Wrap is currently offered in both tan and black in a 1.5” width, and 10 and 20 foot lengths. Installation is made easier with the exterior exoskeleton that “locks in” when overlapped for a secure fit. Recommended use includes exhaust pipes, headers or for spot protection of pipes and components.

For more information about the EXO Series Exhaust and Pipe Wrap or other thermal control performance products, visit www.DesignEngineering.com, call DEI at 800-264-9472 or e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.. 

Avon Lake, OH (December 14, 2016) -- DEI recently introduced a new product brochure at the 2016 SEMA Show. The full color brochure features 18 all new parts, and nearly 60 new part numbers.

A few products featured in this brochure include: DEI’s protective Easy Loom™ Split Sleeves for protection of wire, hoses and cables, Boom Mat pre-cut Interior Heat and Sound Control Kits, and the DEI Form-A-Shield™ that can withstand direct temps up to 1800°F; making it a heat barrier for direct contact to hot surfaces.

This year, DEI introduced EXO Series™ Sleeving designed to protect wires, hoses and cables positioned near heat sources such as exhaust systems and headers. Made of 304 stainless steel mesh, the encapsulating DEI Fire Sleeve™ creates an air gap to provide abrasion resistance.

Also new is DEI’s Heat Reflective Arm Band to be worn over the shoulder of a Go Kart driving suit for protection against heat from hot exhaust pipes. All products featured in the new product brochure are Made in the USA and developed at the company’s headquarters in Avon Lake, OH.

To receive the 2017 DEI New Products Brochure, call 800-264-9472, or send an email requesting the brochure at This email address is being protected from spambots. You need JavaScript enabled to view it. more information about Design Engineering and its full line of heat and sound control products visit www.DesignEngineering.com, or view this video from the 2016 SEMA Show.

A new multi-purpose acoustical tape designed for automotive, yet equally useful for non-automotive applications.

April 2, 2018, Avon Lake, Ohio - DEI’s Boom Mat acoustic products provide multiple and innovative ways to improve sound and reduce noise for vehicles of all makes and models. Now,Boom Mathas introduced a new multi-purpose damping tape designed for automotive and non-automotive applications. Ideal for any tool box, Boom Mat multi-purpose damping tape is handy to have in the car, a home garage or professional shop as a preventative solution to aggravating sounds or road noise.

For automotive, it can be used to cover and protect wire and cable harnesses along floorboards, and improve stereo acoustics, add it to any place where plastic against plastic creates chaffing. Boom Mat Tape can also be used to eliminate rattles along door panels, floor pans, deck lids and trunk areas.

For use in the home or shop, it can be used any place where there is unwanted noise. For example, suggested functional uses include on the bottom of an aluminum or metal sink to eliminate ringing, on water pipes to prevent vibration, or on a noisy sump pump. Other home uses include heating and cooling ducts, drain gutter seams, use along metal doors or under metal workbenches. It is also ideal for or use with home stereo systems or in a theatre room for enhanced sound. For RV campers, Boom Mat Tape covers seams and can be applied to the RV roof to fix leaks.

Made of 2.5mm thick butyl rubber with aluminum facing, Boom Mat Damping Tape, #050215, comes as a 2” x 20’ roll. The easy to remove clear plastic release liner makes application a quick peel and stick process. 

 Boom Mat Tape adheres securely to most any material including metal, aluminum, fiberglass, plastic as well as foam padding and fabric. Easy to cut, it conforms and can be applied to any shape surface without use of special tools.

For more information about DEI’s full line of heat and sound products,visit www.DesignEngineering.com, call 800-264-9472, or e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it..To keep up with the very latest DEI product introductions and company news connect with DEI on Facebook or Twitter or subscribe toDEI’s You Tube channel.

Custom Underhood Sleeve Protection for Wires, Cables & Hoses In One Convenient Kit 

Avon Lake, Ohio - The DEI Easy Loom™ Split Line Sleeving Master Kit has everything you need in one convenient kit to add protective split line sleeving for an entire vehicle. Ideal for wrapping wiring harnesses for an EFI conversion, DEI’s Easy Loom Split Line Sleeve Master Kit offers a solution to protect exposed wires, hoses and cables from heat and the elements. This can be especially important for high performance modified vehicles exposed to swings in temperature. 

The kit provides a method to professionally customize an engine bay for show vehicles and builds, and can be used for any vehicle from hot rods, street rods, race vehicles, trucks/SUVs, as well as marine and ATV and UTV powersport vehicles. They are also ideal for replacing OEM wire looms or dressing up an engine bay, and are approved for use by most automotive OEMs.   

Self-wrapping Easy Loom is lightweight, flexible and simple to install. Resistant to high temperatures and most automotive fluids, DEI’s Easy Loom Split Line Sleeves have a peak temp rating of 345°F temperature and maintains integrity at a continuous 300°F with a melting point of 500°F. The sleeving has a self-closing split design that has a 30% overlap to ensure a strong secure install. Easy to remove for maintenance and repair. 

The kit includes five different diameter split sleeves (3/16”, 5/16”, ½”, ¾” and 1”) in addition to quality 3:1 shrink tube ends, silicone tape, nylon zip ties and electrical tape; ensuring that all required sizes are included and no return trips to get the right size. 

For more information about DEI’s protective Easy Loom Master Kit, visit www.DesignEngineering.com, call 800-264-9472, or e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.. To keep up with the very latest DEI product introductions and company news connect on Facebook, Twitter, Pinterest or subscribe to DEI’s You Tube channel.

Formed in 1995, Design Engineering, Inc.™ (DEI) is a major U.S. manufacturer and supplier of high performance automotive aftermarket products selling worldwide to a large number of commercial markets – automotive and racing, V-Twin, Sportbike/Metric, ATV/UTV/Off-road, 12 Volt/Car Audio, Industrial, Marine, and Aeronautical. DEI, located in Avon Lake, OH, specializes in the development of thermal and acoustic performance products as well as cryogenic intake systems and related accessories under the CryO2™ brand, acoustical insulation, sound deadening products under the popular Boom Mat™ brand, as well and a full line of performance coolant additives under the brand Radiator Relief™.

DEI has now introduced heat reflective Fuel Injector and Sensor Covers that are available in packs of two, four, six or eight, that efficiently reflects direct and radiant heat away from injectors and sensors. Constructed of high-temperature rated glass fiber material bonded to a heat reflective aluminized material, DEI’s Fuel Injector and Sensor Covers work well on most any engine configuration with stock or aftermarket injectors and sensors.

The heat reflective covers are made with a split design allowing each to wrap around the individual injector/sensor and then secured with a sewn-in hook and loop fastening edge. There is no need to remove the injector.

Excessive heat can cause performance and factory fuel injectors and sensors to be at risk of vapor lock or heat soak which can cause rough idling, slow starting or other potential serious engine problems. Also, cooler injectors perform more efficiently with a more consistent throttle response.

• Part# 010380 – 2 pack
• Part# 010381 – 4 pack
• Part# 010382 – 6 pack
• Part# 010383 – 8 pack

For more information about DEI’s Made in the USA Fuel Injector and Sensor Covers or other thermal protective products, visit www.DesignEngineering.com, call DEI at 800-264-9472 or e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.. To keep up with the latest new thermal performance products from Design Engineering, Inc. (DEI), like us on Facebook, or follow us on Twitter.

Avon Lake, Ohio  - Heat and sound control specialist, DEI, now offers a sharp looking sound deadening headliner kit that improves interior comfort and sound quality for the Jeep® Wrangler JL. With the introduction of the JL model Jeep Wrangler in 2018, it has quickly become a popular off-road vehicle, despite the problems associated with interior noise that makes it difficult to have a conversation or listen to music. DEI’s solution is a sound deadening headliner kit that both insulates the interior from extreme heat and cold while reducing the transfer of noise for much improved interior sound quality.

DEI’s new headliner kit is now available for the 2018-2019, 4-door model in two finishes – Original and Leather Look. Original finish comes in three attractive colors: black, gray and white. Leather Look is available in black and gray only. This nine-piece headliner kit is also available with a matching four piece side window kit, also in either an Original or Leather Look finish. Two door models will be available later in 2019.

Made from marine grade foam that resists mold and mildew, and custom cut for the JL model, DEI’s JL Sound Deadening/Insulating Headliner Kit transforms the hard top to a sharp finished look; all while greatly improving sound quality and insulating the interior from extreme heat and cold. CNC machined for a perfect OE fit, this headliner includes full installation instructions to make this a simple and easy install in just a few hours. Simply peel, position in place and stick for a professional look that will dress up the interior and add value.

For more information about DEI’s JL Jeep Wrangler Sound Deadening/Insulating Headliner Kit and other heat and sound solutions, please visit DesignEngineering.com, call 800-264-9472, or e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.. To keep up with the very latest DEI product introductions and company news connect with DEI on Facebook or Twitter or subscribe to DEI’s You Tube channel.

Design Engineering, Inc.® (DEI) is the leading manufacturer and supplier of high performance innovative heat and sound control products selling worldwide to a large number of commercial markets – Automotive, Race, V-Twin, Sportbike/Metric, ATV/UTV/Off-road, 12 Volt/Car Audio, Industrial, Marine, and Aeronautical. Formed in 1995, the company is located in Avon Lake, OH. Additional DEI related brands marketed worldwide are CryO2™ cryogenic intake systems and related accessories, Boom Mat® acoustical insulation and sound deadening products and Radiator Relief™ performance coolant additives.

2/29/2016 -- DEI’s new Heat Screen is made of Mylar laminated to a glass fiber matting backed with an aggressive pressure sensitive adhesive for easy peel and stick application with high cohesion strength.

Designed to protect against excessive direct or radiant heat, it is developed to withstand 1200°F direct heat, or up to 2000°F radiant. To apply, simply cut and trim to cover body panels, floor boards, gas tanks, fairings, and other areas requiring thermal protection. It can also be used as a low profile protection under carpeting to lessen floorboard heat.  Measuring only .060 inches in thickness, this versatile, thin profile reflective material adheres quickly and easily to any surface, even or uneven, painted or unpainted.

Use wherever there is need for thermal control and minimal clearance for race and show vehicles, or any car or truck, stock or modified to reduce radiant heat. Heat Screen is available for purchase in options of five square feet, 36” x 20” (part #010399), or 10 square feet, 36” x 40” (part #010400).

Versa Shield protects starters and other components from the damaging effect of heat soak.

Avon Lake, Ohio (May 4, 2016)…Constructed of an aluminized heat reflective material backed with a high temperature rated glass fiber insulation barrier, the new mini DEI Versa Shield™ protects starters and other components from failure due to heat soak. Capable of reflecting radiant heat up to 2000°F and direct heat up to 500°F, this innovative thermal product installs easily and can be trimmed to size.

Its convenient hook and loop closure design allows the shield to wrap around the starter and attach in minutes. Most starters will not require removal. Simply wrap the starter with the aluminized side out, trim length to fit and secure the edges by pressing the black loop material sewn into the material into the sewn in strip of black hook material.

Developed with a universal design to fit most mini sized starters (5.25” wide x 16.5” long) the shield is also ideal for multiple components where heat can affect performance—master cylinders, distributors, fuel pumps and more.  

Thermal protective wire sleeving is now available in 50 ft. spools with multiple options in color and size.

Avon Lake, Ohio (May 26, 2015)…DEI’s Protect-A-Wire™ offers a cost effective way to protect expensive spark plug wire sets from burning, cracking or hardening. It is also an "excellent" choice for wire looms for a clean wiring installation.  Excessive under hood heat can cause arching, engine misfire or damage. Protect-A-Wire is constructed of high temp resistant glass fiber material developed to handle 500°F direct heat or 1200°F radiant heat; Ideal for all electrical wiring, speedometer cable, or hose up to 10mm in diameter, Protect-A-Wire is resistant to hot oil and chemical spills, and adds protection against dirt and abrasion.

Now, DEI offers seven bulk spool options in colors; black, red and blue; all in 50’ lengths. Diameter sizes range from 3/16”, 5/16” and 1/2”, ideal for race teams, engine builders and race shops for a clean, professional look that works with any electrical wiring, hose or fuel line.

For more information about Protect-A-Wire or other DEI high performance thermal products, visit www.DesignEngineering.com, call 800-264-9472, or e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.. To keep up with the very latest DEI product introductions and company news connect on Facebook, Twitter, Pinterest or subscribe to DEI’s You Tube channel.

Ideal for pit or paddock, it reflects radiant heat to keep fuel cool

Avon Lake, Ohio (January 31, 2017)…DEI now offers a protective heat reflecting Fuel Can Cover in a new 11 gallon dump can size.

Race fuel manufacturers and suppliers typically recommend fuel to be covered or kept in the shade at the pit or paddock as heat exposure effects the performance and shelf life of race fuels, especially expensive oxygenated fuels. DEI’s new Reflective Dump Can Cover prevents the need to constantly move fuel into the shade to stay cool or covering it with a blanket. Lightweight and durable with a custom fit for an 11 gallon dump can, it slips on and off in seconds allowing the can to be placed where it is most needed; even if in direct sunlight.

This new convenient size may fit other brands of 11 gallon dump cans and joins DEI’s previously introduced 5 gallon race metal can cover, #010467.

For more information about DEI’s Made in the USA 11 Gallon Dump Can Reflective Fuel Cover, part #010498, visit www.DesignEngineering.com, call 800-264-9472, or e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.. To keep up with the very latest DEI product introductions and company news connect on Facebook, Twitter, Pinterest or subscribe to DEI’s You Tube channel.

Protects starters and other components from the damaging effect of heat soak.

Avon Lake, Ohio (May 4, 2016) -- Constructed of an aluminized heat reflective material backed with a high temperature rated glass fiber insulation barrier, the new mini DEI Versa Shield™ protects starters and other components from failure due to heat soak. Capable of reflecting radiant heat up to 2000°F and direct heat up to 500°F, this thermal product installs easily and can be trimmed to size.

Its convenient hook and loop closure design allows the shield to wrap around the starter and attach in minutes. Most starters will not require removal. Simply wrap the starter with the aluminized side out, trim length to fit and secure the edges by pressing the black loop material sewn into the material into the sewn in strip of black hook material.

Developed with a universal design to fit most mini sized starters (5.25” wide x 16.5” long) the shield is also ideal for multiple components where heat can affect performance—master cylinders, distributors, fuel pumps and more.  

For more information about DEI’s Made in the USA Versa Shield (part # 010384), visit www.DesignEngineering.com, call 800-264-9472, or e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.. 

A growing list of DEI part numbers is now available at more than 4500 AutoZone stores 

Avon Lake (August 2, 2016)…DEI, the leading brand for automotive thermal protection, is proud to announce the availability of two new thermal protection products at AutoZone® stores nationwide.

DEI’s Titanium Protect-A-Sleeve with LR Technology and Reflect-A-GOLD are now available at more than 4500 AutoZone stores joining DEI’s flagship thermal wrap product - Titanium Exhaust Wrap with LR Technology™ in the 2” x 50 ft. length.

The newly added Titanium Protect-A-Sleeve with LR Technology provides thermal protection for wires, lines and cables from the damaging effect of direct and radiant heat; up to 1800°F direct heat, and 2500°F radiant. It is available at AutoZone in the ½” ID x 4 ft. length (part #010065).  

The material used in DEI’s Titanium Exhaust Wrap and Protect-A-Sleeve is composed of pulverized lava rock extruded into fibers and woven into a proprietary tight weave to provide a titanium-like strength and longlasting durability. It has a cool carbon fiber look that works well in any vehicle – show, race or daily driver; and provides protection of sensitive components at risk of heat soak.

Reflect-A-GOLD is a metalized polyamide polymer backed by a high temperature pressure sensitive adhesive used to reflect heat on firewalls, air boxes, air induction tubing, bulkheads, engine covers, floors, seat bottoms and other area’s needing thermal protection. Lightweight and low profile, Reflect-A-GOLD resists UV degradation and can be trimmed to size. Reflect-A-GOLD is available at AutoZone in a 12” x 12” sheet (part #010066.)

For more information about DEI’s thermal protection products available through AutoZone call DEI at 800-264-9472, or e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.. To keep up with the latest new thermal performance products from Design Engineering, Inc.™ (DEI), like us on Facebook, or follow on Twitter. For more information about AutoZone, go to www.autozone.com.

Turbos are designed to be one of the easiest and most effective ways to add horsepower. DEI’s ONYX Series Turbo Shield maintains consistent temperature in the turbo to maximize efficiency and reduce lag.

Building on the popularity of DEI’s ONYX Series product offerings, DEI is now introducing the ONYX Series Black Turbo Shield for smaller sized turbos including Garrett, Mitsubishi and others. The ONYX Series Shield is available for the GT22 (part #010161) or the GT25 (part #010163), or as a kit: GT22 Kit (part #010162) or GT25 (part #010164).  For correct sizing, DEI recommends referring to the sizing chart located at www.designengineering.com.

The kit includes the black turbo shield made of premium heat resistant textiles and newly designed stainless steel attachment anchors, a 2” x 15’ premium roll of DEI black exhaust wrap, two stainless steel locking ties, and a roll of stainless steel locking wire.

DEI’s newly released EXO Series™ Protect-A-Boot is designed maximum spark plug boot and wire heat protection. Ideal for all grassroots and professional motorsports, including extreme sports, the EXO Series spark plug boot provides top-of-the-line protection for your spark plug wires against high direct or radiant heat.

The EXO Series boot features dual layer material construction of two layers of high temperature Silica glass fiber encased in a tough outer exoskeleton of 304 grade stainless steel mesh.  The mesh prevents direct contact with the inner Silica lining and additionally provides an insulating air gap barrier. The dual layer construction and tough exterior provides a higher level of heat dissipation and abrasion resistance for high heat or abrasion prone environments such as off-road and desert racing.

The EXO Series boot is sized 1” ID x 6” L and is now available in packs of 2 (part #010088), 4 (part #010087) 8 (part #010086), or in bulk (010506B).  So whether there’s a need to protect a few spark plug boots from a high-heat area such as exhaust headers, or protecting a complete 8 cylinder application, DEI offers quantity choices to fit the vehicle owner’s needs.

For more information about the new EXO Series Protect-A-Boot, visit www.DesignEngineering.com, call DEI at 800-264-9472 or e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.. To keep up with the latest new thermal performance products from Design Engineering, Inc. (DEI), like us on Facebook, or follow on Twitter.