Coral Springs, Fla. -- October 29, 2019 -- NAV-TV Corp., a leading innovator and manufacturer of OEM integration and safety products for the automotive aftermarket, announces the ZEN-AVB-GM preamplifier. The ZEN-AVB-GM is the newest addition to the competition- proven ZEN Audio family of digital preamplifiers and is the first aftermarket automotive product utilizing AVB.

The ZEN-AVB-GM is compatible with 2017 to 2020 Cadillac, Chevrolet and GM vehicles equipped with AVB infotainment radios IOT (8” with navigation) or IOS (8” without navigation) and Bose®. The preamplifier produces a completely flat audio output without any factory time delay or equalization, eliminating the need for summing devices, an audio correction DSP or the removal of the factory audio compensation microphones. Volume, Fade [1] and Balance are supported through the factory radio and steering wheel controls.

Utilizing a 128 bit per channel floating point DSP and 192 kHz 32 bit TI (Burr-Brown) DAC, the ZEN-AVB-GM produces a 6 channel analog output (Front L/R, Rear L/R, Sub and Center) with a peak voltage of 6.3V and a S/N Ratio of 112dB. All warning chimes and audible turn signal indications are attenuated to factory levels and, along with Onstar®, Navigation prompts and Bluetooth, are passed to the front output channels [2], eliminating the need for an external speaker. The unit provides a 500mA output for controlling aftermarket devices and, additionally, retains the factory three band equalizer (high, mid and bass).

For use with third party digital sound processors [3], the ZEN-AVB-GM includes a variable Toslink (optical) digital output which may be used simultaneously with the analog outputs, or by itself. The variable digital output allows for the system volume to be controlled via the factory radio and steering wheel controls without the need to access any third party controller.

For ease of use, the ZEN-AVB-GM is configurable through dip switch settings. User selectable features of the ZEN-AVB-GM are: 

·        Factory Bass control becomes a Subwoofer Level Controller or Controls Bass for the entire system (Analog output only) – eliminates the need for a sub control knob!
·        Loudness control for extended bass response at low levels or loudness off (Analog output only)
·        Selectable output level: 0dB or -6dB. Digital Output at 24 bit 48 kHz.

In order to make the Zen Audio compatibility process simple for General Motors vehicles, NAV-TV has produced a short video that will help qualify the vehicle infotainment system to ensure compatibility using a QR code reader. Vehicles with infotainment options IOT or IOS and Bose utilize the ZEN-AVB-GM and those with infotainment options IO4, IO5 or IO6 and Bose utilize the M650-GM. The video may be viewed at https://youtu.be/YMHfpRytPho.

Pre-orders of the ZEN-AVB-GM (sku# NTV-KIT955) are being accepted starting October 29th, 2019 and will begin shipping on November 4th, 2019 with a retail price of $599.00 USD.

For more information on the ZEN-AVB-GM, or our existing line of over 950 other integration and safety products, please contact your NAV-TV sales representative at  (866) 477-3336  (USA and Canada toll free) or (561) 955-9770 (International), or email our sales staff at This email address is being protected from spambots. You need JavaScript enabled to view it.

NAV-TV Corp is a solely owned and privately held corporation based in Coral Springs, FL, USA. Established in 1999, NAV-TV is a prime manufacturer, distributor and contract manufacturer of OEM and Aftermarket integration and electronic components. Additional information about NAV-TV is available at www.navtv.com or by emailing This email address is being protected from spambots. You need JavaScript enabled to view it.

[1] Fade is only supported through the analog outputs. When using the digital outputs, fade will need to be controlled via the third party product.
[2] When utilizing the analog outputs all warning chimes will be designated only to the front output. When utilizing digital outputs all chimes, etc will appear in both the front and rear channels.
[3] Please refer to the operation and installation manual of your 3rd party DSP or device, or contact the manufacturer directly. Although NAV-TV has tested numerous 3rd Party DSP devices for compatibility with the ZEN-AVB-GM, we cannot provide technical support on 3rd party products.

June 12, 2019 -- Coral Springs, Fla. and Seoul, South Korea -- Three seconds is not a long time; it’s about the time it takes the average individual to inhale and exhale. However, in a vehicle traveling at highway speeds, it’s enough time for your vehicle to cover 330 feet.

According to the National Highway Transportation Safety Association (NHTSA), which has collected data from all 50 states and the District of Columbia, 37,461 lives were lost on U.S. roads in 2016, an increase of 5.6 percent from calendar year 2015. 1 It is estimated that 94% of all accidents are caused by driver error and nearly 80 percent of crashes involved some form of driver distraction within three seconds before the incident. Therefore, it begs to reason that a driver who is distracted for as little as 3 seconds exponentially increases their chances of an otherwise avoidable collision.

To combat distracted driving and correct negative driving habits, Advanced Driver Assistance Systems (ADAS) have been deployed by almost every modern automotive vehicle manufacturer today. ADAS systems work by warning the driver of an unintentional lane change, following a vehicle in front of them too closely, a pedestrian in the path of the vehicle or a sudden and unexpected change in the flow of traffic ahead.  However, ADAS is not available in every new vehicle model and, with the average age of vehicles in the United States reaching 11.8 years old in 2019, tens of millions of cars on U.S. roadways do not have the benefit of ADAS technology.

In order to add life-saving technology to the millions of vehicles globally without ADAS, NAV-TV Corp®, has partnered with South Korean Tier-1 ADAS supplier Movon to launch the MDAS-9. The MDAS-9 is a commercial-grade aftermarket advanced driver assistance system with the added benefit of a built-in digital video recorder (DVR). The system is universal and may be installed on passenger vehicles, commercial vehicles or heavy equipment alike and operates on both 12 and 24 Volt DC charging systems.

Unlike other aftermarket ADAS systems, the MDAS-9 requires no special calibration or alignment aids, making the installation simple and fast. Vehicle speed, turn signal and brake information are obtained either through CAN, analog inputs, or a combination of the two. The included inductive CAN interface allows the vehicle data to be read without modifying the vehicle wiring or voiding the warranty.

Utilizing both audible and visual alerts, the MDAS-9 monitors and records the road ahead and alerts the driver to changing road patterns or potentially hazardous driving habits. Alerts of the MDAS-9 include:

Forward Collision Warning (FCW): Assists the driver in maintaining a safe distance to vehicles ahead. Provides the driver with a distance to the vehicle ahead and gives an audible and visual warning if a potential collision is identified

Lane Departure Warning (LDW): Alerts the driver with an audible and visual warning if a lane departure is identified without the driver using their turn signals. This enables the driver to quickly correct potentially unsafe or unintentional lane changes.

Pedestrian Collision Warning (PCW): Warns the driver by sending out an audible and visual alert whenever a pedestrian, bicyclist or motorcycle is identified. Alerts are active from 0-24 mph.

Forward Proximity Warning (FPW): Identifies vehicles ahead during low speed operation. The FPW features alerts the driver when it detects a vehicle ahead at low speeds. The distance is configurable from 4’ to 10’ and speed can be configured from 0-18 mph.

Front Vehicle Start Alarm (FVSA): Notifies the driver if the vehicle ahead moves forward from a complete stop yet the driver does not move forward after 2 seconds. This feature helps to avoid driver distraction at stop sign and stop lights.

Digital Video Recorder (DVR): Records HD video of the road ahead and displays the video with all ADAS warnings and alerts upon playback. Supports loop recording to the on-board SD card every minute. With the optional driver facing or rear view camera, the driver or rear of the vehicle is displayed in a picture-in-picture mode along with the front camera and all ADAS warnings and alerts. The on-board DVR is compatible with micro SD cards up to 128 GB.

The MDAS-9 comes standard with a composite video output which can be used to display the front camera image on a vehicle-specific NAV-TV video integration device, a hidden external DVR or video streaming device, an aftermarket radio or monitor. The optional haptic vibration alert device provides an additional layer of protection by adding a vibration alert to the driver’s seat, seatbelt or steering column. For use in older vehicles, or vehicles that utilize a mechanical speedometer, vehicle speed information may be obtained from the available GPS Antenna.

For fleets and commercial applications that may desire immediate notification of alerts, the MDAS-9 is compatible with third party asset allocation systems. The on-board Fleet Management System (FMS) port delivers digital communication of an alert, the frequency of an alert, and the time of the alert to the third party device which is then transmitted through cellular data to the fleet manager or responsible party. Currently supported third party asset allocation devices include Geotab, Servision,Traffilog and Ituran.

A video presentation of the MDAS-9, as well as a sneak peek of the upcoming MDSM-7 distracted driver alerts system, may be viewed HERE.

The MDAS-9 is exclusively available in the USA and Canada through authorized NAV-TV dealers. For more information on the MDAS-9, or for a referral to a certified NAV-TV dealer in your area, please contact us at 1-866-477-3336 (toll free USA and Canada), 1-561-955-9770 (international) or by emailing us at . 

NAV-TV Corp is a solely owned and privately held corporation based in Coral Springs, FL, USA. Established in 1999, NAV-TV is a prime manufacturer, distributor and contract manufacturer of OEM and Aftermarket integration and electronic components. NAV-TV’s intellectual property is protected by US Patents #’s 7,917,261 and 8,103,407. Additional information about NAV-TV is available at www.navtv.com or by emailing 

Movon Corporation was founded as a testing laboratory office of Cetecom Germany in Seoul, Korea in 1998. With the strength in in-field testing, Movon established a wireless R&D center in 2001 and launched the first Bluetooth module the following year. Presently, Movon is presently a Tier-2 Bluetooth supplier for General Motors.

In 2004, Movon expanded into specialized automotive testing and built a testing laboratory which has been accredited by auto makers such as Volkswagen, General Motors, Ford, Jaguar Land Rover, FCA, Hyundai, Renault, etc.

In 2011 Movon launched their Advanced Driver Assistance System division. Since its inception, the ADAS division has been focused on developing an affordable camera safety system, using advanced ADAS algorithms for accurate detection of Lane Departure Warning (LDW), Forward Collision Warning (FCW), and Pedestrian Collision Warning (PCW). Movon is presently a Tier-1 ADAS supplier for TATA Daewoo Commercial Vehicles.

March 25, 2021 -- Coral Springs, Florida -- NAV-TV Corp., a leading innovator and manufacturer of OEM integration and safety products for the automotive aftermarket, announces that Audi MIB3 has been added to the ZEN-V compatibility list.

 The ZEN-V advance amplifier interface is now compatible with 2020 and 2021 Audi vehicles equipped with the MIB3 system. The ZEN-V allows the seamless addition of aftermarket amplifiers into compatible vehicles, delivering audiophile-quality sound without compromising the vehicle’s factory fit, finish or features. ZEN-V is the first aftermarket product utilizingMOST®150 globally.

Utilizing the same processing power as NAV-TV’s competition proven M650-GM, the ZEN-V produces a completely flat audio output without any factory time delay or equalization, eliminating the need for summing devices, an audio correction DSP or the removal of the factory audio compensation microphones. Installation of the interface requires no modification to the vehicle and is compatible with both amplified and non amplified factory systems. Volume, [1], Balance and Bass/Treble tone controls are retained through the factory radio and echo cancelation for the factory Bluetooth hands-free system is supported.

Utilizing a 128 bit floating point DSP and 192 kHz 32 bit DAC, the ZEN-V produces a 12 channel analog output with a S/N Ratio of 112dB. For vehicles with video playback capability, the ZEN-V supports 7.1 and 5.1 audio[1}. The unit provides a 500mA output for controlling aftermarket devices and, additionally, retains the factory equalizer.

For use with third party digital sound processors [2], the ZEN-V includes a variable TOSlink digital output which may be used simultaneously with the analog outputs, or by itself. The variable digital output allows for the system volume to be controlled via the factory radio and steering wheel controls without the need to access any third party controller.

For ease of use, the ZEN-V is configurable through dip switch settings.  User selectable features of the ZEN-Vare:

·         Optional time alignment to driver

·         Full scale audio or -12dB attenuation

·         7.1 downmix to stereo on TOSlink or TOSlink mapped to the front outputs

·         Loudness on or off

·         Enables factory subwoofer control

Vehicles will require the additional MIB3-MOST PRG programmer prior to the installation of the ZEN-V[3]. The MIB3-MOST PRG is included in the MIB3 bundle and comes with unlimited usage.

The ZEN-V  MIB3 Bundle (NTV-KIT997) is currently available and shipping. 

To place an order, or for more information on the ZEN-V, please contact your NAV-TV sales representative at (866) 477-3336  (USA and Canada toll free) or +1(561) 955-9770 

NAV-TV Corp is a solely owned and privately held corporation based in Coral Springs, FL, USA. Established in 1999, NAV-TV is a prime manufacturer, distributor and contract manufacturer of OEM and Aftermarket integration and electronic components. Additional information about NAV-TV is available at www.navtv.com or by emailing This email address is being protected from spambots. You need JavaScript enabled to view it.

[1] 7.1 and 5.1 audio and fade are supported on the analog outputs only.

[2] Please refer to the operation and installation manual of your 3rd party DSP or device, or contact the manufacturer directly. Although NAV-TV has tested numerous 3rd Party DSP devices for compatibility with the ZEN-V, we cannot provide technical support on 3rd party products. On 7.1 downmix Fade is not supported. If TOSlink is mapped to the front it will support front channel audio output only.

Coral Springs, Florida - April 5, 2018 - NAV-TV Corp., a leading innovator and manufacturer of OEM integration and safety products for the automotive aftermarket, announces that Volkswagen has been added to the ZEN-Vcompatibility list. In addition, base-model and older Audi infotainment systems MIB and MIB HS have been qualified and are now completely compatible with the ZEN-V audio interface. 

Announced on March 26th, 2018, the ZEN-V advance amplifier interface is compatible with select Audi, Bentley, Porsche and VW vehicles utilizing MOST®150. The ZEN-V allows the seamless addition of aftermarket amplifiers into compatible vehicles, delivering audiophile-quality sound without compromising the vehicle’s factory fit, finish or features. ZEN-V is the first aftermarket product utilizing MOST®150 globally. 

Utilizing the same processing power as NAV-TV’s competition proven M650-GM, the ZEN-Vproduces a completely flat audio output without any factory time delay or equalization, eliminating the need for summing devices, an audio correction DSP or the removal of the factory audio compensation microphones.  Installation of the interface requires no modification to the vehicle and is compatible with both amplified and non amplified factory systems[1]. Volume, Fade[3], Balance and Bass/Treble tone controls are retained through the factory radio and echo cancelation for the factory Bluetooth hands-free system is supported. 

Utilizing a 128 bit floating point DSP and 192 kHz 32 bit DAC, the ZEN-Vproduces a 12 channel analog output with a S/N Ratio of 112dB. For vehicles with video playback capability, the ZEN-V supports 7.1 and 5.1 audio[2}. The unit provides a 500mA output for controlling aftermarket devices and, additionally, retains the factory equalizer. 

For use with 3rd party digital sound processors[3], the ZEN-V includes a variable TOSlink digital output which may be used simultaneously with the analog outputs, or by itself. The variable digital output allows for the system volume to be controlled via the factory radio and steering wheel controls without the need to access any 3rd party controller.

The updated ZEN-V compatibility list now supports the following vehicle infotainment platforms:

• 2015 up Audi with MIB, MIB HS and MIB2 infotainment system
• 2016 and up Porsche Panamera with PCM4.1
• 2017 and up Porsche Cayman, Boxster, 911, Macan and Cayenne with PCM4.0
• 2017 Bentley Bentayga with MIB2
• 2016 and up Volkswagen vehicles with MIB & MIB2 (must verify the presence of a MOST fiber optic connector on all VW MIB and MIB2 systems to verify compatibility) 

For ease of use, the ZEN-V is configurable through dip switch settings. User selectable features of the ZEN-Vare:

• Optional time alignment to driver
• Full scale audio or -12dB attenuation
• Loudness on or off
• Vehicle selection for Audi, Porsche, Bentley or VW
• Enables factory subwoofer control (Audi, Bentley and VW)
  
  

Vehicles without a factory amplified system will require the additional ZEN-V-PRG programmer prior to the installation of the ZEN-V[4]. The ZEN-V-PRG is sold separately and comes with unlimited usage, allowing both programming and unprogramming in multiple vehicles. Alternatively, NAV-TV will provide programming instructions to enable the amplifier setting utilizing a VAG-COM or VAG-CAN PRO, free of charge. Vehicles with factory amplified systems do not require any programming. 

The ZEN-V (NTV-KIT860) and ZEN-V-PRG(NTV-KIT861)are currently available and shipping. To place an order, or for more information on the ZEN-V, please contact your NAV-TV sales representative at (866) 477-3336  (USA and Canada toll free) or +1(561) 955-9770 (International), or email our sales staff at This email address is being protected from spambots. You need JavaScript enabled to view it.. European customers with inquires may contact NAV-TV UK at +44-333-700-1515 or by emailing This email address is being protected from spambots. You need JavaScript enabled to view it.. 

NAV-TV Corp is a solely owned and privately held corporation based in Coral Springs, FL, USA. Established in 1999, NAV-TV is a prime manufacturer, distributor and contract manufacturer of OEM and Aftermarket integration and electronic components. Additional information about NAV-TV is available at www.navtv.com or by emailing This email address is being protected from spambots. You need JavaScript enabled to view it.

[1] Vehicles without factory amplified systems will require the ZEN-V_PRG (sold separately) or the use of a VAG-COM or VAG-CAN Pro to enable the MOST network and amplifier setting prior to installation. 

[2] 7.1 and 5.1 audio are supported on the analog outputs only. 

[3] Please refer to the operation and installation manual of your 3rd party DSP or device, or contact the manufacturer directly. Although NAV-TV has tested numerous 3rd Party DSP devices for compatibility with the ZEN-V, we cannot provide technical support on 3rd party products. On 7.1 downmix Fade is not supported. If TOSlink is mapped to the front it will support front channel audio output only. 

[4]  Programmer is sold separately and is not included with the ZEN-V. It may be ordered as NAV-TV part NTV-KIT861 ZEN-V-PRG and includes unlimited usage to both program a vehicle and return it back to stock, if needed.

09/01/2017 - Coral Springs, Florida -- NAV-TV Corp., a manufacturer of OEM integration and safety products for the automotive aftermarket, announces a revolutionary new amplifier integration solution that allows the seamless addition of aftermarket amplifiers into General Motors Vehicles equipped with MOST®50. With the M650-GM, installers can now deliver the audiophile-quality sound their customers demand without compromising the vehicle’s factory fit, finish or features.

The M650-GM produces a completely flat audio output without any factory time delay or equalization, eliminating the need for summing devices, an audio correction DSP or the removal of the factory audio compensation microphones. It is 100% plug-and-play, installing at the factory tuner in both amplified and non amplified GM vehicles. Installation of the interface requires absolutely no modification to the vehicle or the removal of any factory equipment and can be used when completely replacing the factory speakers, or in any combination utilizing the factory audio components. Volume, Fade[2], eliminating the need for an external speaker. The unit provides a 500mA output for controlling aftermarket devices and, additionally, retains the factory 3 band equalizer (high, mid and bass).

For use with 3rd party digital sound processorsFactory Bass control becomes a Subwoofer Level Controller or Controls Bass for the entire system (Analog output only) – eliminates the need for a sub control knob!

• Time alignment to driver (Full-Sized SUV and Truck Only) or no time alignment (Analog output only)
• Loudness control for extended bass response at low levels
• Digital Output at 24 bit 48 kHz or 24 bit 96 kHz (Digital outputs only. Refer to your DSP for compatibility with digital audio above 48 kHz)

The M650-GM (SKU# NTV-KIT838) will be available and shipping on September 4th, 2017. A demonstration video of the M650-GM may be viewed at https://youtu.be/1ud3lRElaxA .

For more information on the M650-GM, or our existing line of over 800 other integration and safety products, please contact your NAV-TV sales representative at  (866) 477-3336  (USA and Canada toll free) or (561) 955-9770 (International), or email our sales staff at This email address is being protected from spambots. You need JavaScript enabled to view it.

Coral Springs, Fla. -- February 20, 2019 -- First announced during the Dallas Knowledgefest trade show in 2018, NAV-TV Corp., a leading innovator and manufacturer of OEM integration and safety products for the automotive aftermarket, has implemented new lower price points for the Zen Audio line of audiophile-quality audio integration products. The interfaces allow the seamless addition of aftermarket amplifiers into compatible vehicles, delivering audiophile-quality sound without compromising the vehicle’s factory fit, finish or features.

October 14, 2021 -- Coral Springs, Fla. -- NAV-TV Corp., a leading innovator and manufacturer of OEM integration and safety products for the automotive aftermarket, announces the Wireless Charger Pro automotive grade phone charging system.

The Wireless Charger Pro is an automotive-grade charging device for phones and other Qi-compatible devices. Utilizing a triple-coil design, it allows for greater flexibility in positioning the phone without needing to find that "sweet spot." A built-in audible alert will let the customer know when their phone has been detected and charging has begun, so they don't need to look at the phone's screen to know that it's working.

The device will charge through up to 3mm of plastic or rubber, and can be mounted out of sight (under existing trim or a pad.)  The unit has passed rigorous OEM tests, and a version of it is currently in use by a luxury automobile manufacturer.

The Wireless Charger Pro is available and shipping now at an extremely attractive price.  For more information on the Wireless Charger Pro, or to place an order, please contact your NAV-TV sales representative at (866) 477-3336  (USA and Canada toll free) or +1(561) 955-9770 (International), or email our sales staff at This email address is being protected from spambots. You need JavaScript enabled to view it..  

NAV-TV Corp is a solely owned and privately held corporation based in Coral Springs, FL, USA. Established in 1999, NAV-TV is a prime manufacturer, distributor and contract manufacturer of OEM and Aftermarket integration and electronic components. Additional information about NAV-TV is available at www.navtv.com or by emailing This email address is being protected from spambots. You need JavaScript enabled to view it..

June 10, 2020 -- Coral Springs, Florida -- NAV-TV Corp., a leading innovator and manufacturer of OEM integration and safety products for the automotive aftermarket, announces the ZEN-25 preamplifier interface for select 2004 to 2019 BMW vehicles with M.O.S.T.® 25 factory amplified sound systems.

Traditional audio integration devices convert a high- level output from the factory radio or amplifier to low- level, or manipulate a fixed preamp level audio signal. However, this method relies on the factory radio or amplifier to perform the digital to analog conversion (D/A) and may lead to less than ideal sound quality.  Unlike traditional devices, the ZEN-25 for BMW extracts the audio directly from the M.O.S.T.®  25 digital audio stream and performs the D/A conversion internally. Utilizing a 32 bit floating point DSP and 44.1kHz 32 bit DAC, the ZEN-25 produces a 12 channel analog output at 17 volts peak-to-peak with an extremely low noise floor and a S/N Ratio of 114dB. 

Utilizing the same processing power as NAV-TV’s competition-proven M650-GM, the ZEN-25 produces a completely flat audio output without any factory time delay or equalization, eliminating the need for summing devices, an audio correction DSP or the removal of the factory audio compensation microphones. Volume, Fade[1], Balance, Bass/Treble and the factory 7-band EQ are retained through the BMW factory radio and echo cancellation for the factory phone system is supported.

To maximize system flexibility, the ZEN-25 comes standard with a software suite that allows the user to assign warning chimes and phone audio to any channel they desire. The chime and phone volume are adjustable per channel and are independent from the audio stream. For use in BMW systems where a DSP is not installed, the ZEN-25 contains two different time alignment settings that can be selected through the factory Logic 7 button. This allows the user to assign two different optimum listening positions in the vehicle and, combined with the factory 7-band EQ, offers the user greater system tuning flexibility, at an affordable price.

For use with third-party digital sound processors[2], the ZEN-25 includes a variable TOSlink digital output which may be used simultaneously with the analog outputs, or by itself. For use with processors that support simultaneous TOSlink and analog audio inputs, the ZEN-25 allows the user to strip audio from any analog output, assign the TOSlink to either Front Fading or fixed, and to use the analog outputs to only mix in warning chimes. The variable digital output allows for the system volume to be controlled via the factory radio and steering wheel controls without the need to access any third-party controller.

In BMW vehicles that have the ability to play a DVD movie, The ZEN-25 supports Dolby® and DTS® 5.1 playback[3]. For system designs that do not include a center channel speaker, NAV-TV has enabled a “mix down” feature that puts the vocals in a Dolby or DTS encoded audio stream into the left and right front speakers while maintaining stereo separation.

The ZEN-25 (NTV-KIT969) for BMW is available and shipping now. For more information on the ZEN-25, or to place an order, please contact your NAV-TV sales representative at (866) 477-3336  (USA and Canada toll free) or +1(561) 955-9770 (International), or email our sales staff at This email address is being protected from spambots. You need JavaScript enabled to view it.." style="color: #000000;">This email address is being protected from spambots. You need JavaScript enabled to view it..  

NAV-TV Corp is a solely owned and privately held corporation based in Coral Springs, FL, USA. Established in 1999, NAV-TV is a prime manufacturer, distributor and contract manufacturer of OEM and Aftermarket integration and electronic components. Additional information about NAV-TV is available at www.navtv.com or by emailing This email address is being protected from spambots. You need JavaScript enabled to view it.

This email address is being protected from spambots. You need JavaScript enabled to view it.">[1] Fade is supported on all analog outputs. Fade is supported for Toslink only when “front fade” is selected. When TOSlink front fade is selected the TOSlink must be used for the front speakers only. The rear, center and sub channels, in this configuration, are fed from the ZEN-25 analog rear, center and sub outputs.

[2] Please refer to the operation and installation manual of your 3rd party DSP or device, or contact the manufacturer directly. Although NAV-TV has tested numerous 3rd Party DSP devices for compatibility with the ZEN-A2B, we cannot provide technical support on 3rd party products.

[3] Dolby and DTS 5.1 is only supported using the analog outputs. If only TOSlink is used, select “downmix on” in the system configuration settings. 

December 2, 2020 -- Coral Springs, Fla. -- NAV-TV Corp., a leading innovator and manufacturer of OEM integration and safety products for the automotive aftermarket, announces the ZEN-F preamplifier interface for the 2017 to current Ferrari Portofino with M.O.S.T.® 150 factory amplified sound systems.

Utilizing the same ultra-high quality components and manufacturing that have been proven in the Zen-V, ZenM and Zen-25 interfaces, NAV-TV is very excited to add the ZEN-F to its portfolio of high-end amplifier replacement interfaces. Traditional audio integration devices convert a high- level output from the factory radio or amplifier to low-level, or manipulate a fixed preamp level audio signal. However, this method relies on the factory radio or amplifier to perform the digital to analog conversion (D/A) and may lead to less than ideal sound quality.

Unlike traditional devices, the ZEN-F for Ferrari extracts the audio directly from the M.O.S.T.® fiber-optic digital audio stream and performs the D/A conversion internally. Utilizing a 32 bit floating point DSP and 48 kHz 32 bit DAC, the ZENF produces a 12 channel analog output at 6 volts peak-to-peak with an extremely low noise floor and a S/N Ratio of 114dB. Utilizing the same processing power as NAV-TV’s competition-proven M650-GM, the ZENF produces a completely flat audio output without any factory time delay or equalization, eliminating the need for summing devices, an audio correction DSP or the removal of the factory audio compensation microphones.

Volume, Fade[1], Balance, and Bass/Treble are retained through the Ferrari factory radio and echo cancellation for the factory phone system is supported. For use with 3rd party digital sound processors[2], the ZEN-F includes a variable TOSlink digital output which may be used simultaneously with the analog outputs, or by itself. The variable digital output allows for the system volume to be controlled via the factory radio and steering wheel controls without the need to access any 3rd party controller.

The ZEN-F (NTV-KIT987) is available and shipping now.

For more information on the ZEN-F, or to place an order, please contact your NAV-TV sales representative at (866) 477-3336 (USA and Canada toll free) or +1(954) 323-1010 (International), or email our sales staff at This email address is being protected from spambots. You need JavaScript enabled to view it.. 

NAV-TV Corp is a solely owned and privately held corporation based in Coral Springs, FL, USA. Established in 1999, NAV-TV is a prime manufacturer, distributor and contract manufacturer of OEM and Aftermarket integration and electronic components. Additional information about NAV-TV is available at www.navtv.com or by emailing This email address is being protected from spambots. You need JavaScript enabled to view it. [1] Fade is supported on all analog outputs. Fade is not supported for Toslink. [2] Please refer to the operation and installation manual of your 3rd party DSP or device, or contact the manufacturer directly. Although NAV-TV has tested numerous 3rd Party DSP devices for compatibility with the Zen, we cannot provide technical support on 3rd party products.

Coral Springs, Florida - April 23, 2018 -  

NAV-TV Corp., announces the ZEN-M amplifier interface for select Mercedes Benz vehicles utilizing MOST®150. The ZEN-M allows the seamless addition of aftermarket amplifiers into compatible vehicles, delivering audiophile-quality sound without compromising the vehicle’s factory fit, finish or features. ZEN-M is the second MOST®150 digital preamp solution from NAV-TV®,expanding compatibility to now include select Audi, Bentley, Mercedes Benz, Porsche and VW models.

The ZEN-M produces a completely flat audio output without any factory time delay or equalization, eliminating the need for summing devices, an audio correction DSP or the removal of the factory audio compensation microphones. Installation of the interface requires no modification to the vehicle and is compatible with both amplified and non amplified factory systems[1]. Volume, Fade[3], Balance and Bass/Treble tone controls are retained through the factory radio and echo cancelation for the factory Bluetooth hands-free system is supported.

Utilizing a 128 bit floating point DSP and 192 kHz 32 bit DAC, the ZEN-M produces a 12 channel analog output with a S/N Ratio of 123dB. For vehicles with video playback capability, the ZEN-M supports 7.1 and 5.1 audio[2]. The unit provides a 500mA output for controlling aftermarket devices and, additionally, retains the factory equalizer.

For use with 3rd party digital sound processors[3], the ZEN-M includes a variable TOSlink digital output which may be used simultaneously with the analog outputs, or by itself. The variable digital output allows for the system volume to be controlled via the factory radio and steering wheel controls without the need to access any 3rd party controller.

The ZEN-M currently supports the following Mercedes Benz models with NTG5, NTG5*1, NTG5*2 and NTG5*5 infotainment platforms:

Click Here for more information.

Introduces ZEN-A2B Advanced Amplifier Interface for Ford and Lincoln Vehicles with Bang & Olufsen®, Revel® and Revel Ultima® Sound Systems

05/03/2018 - Coral Springs, Florida - NAV-TV Corp., a leading innovator and manufacturer of OEM integration and safety products for the automotive aftermarket, announces the ZEN-A2B amplifier interface for select Ford and Lincoln vehicles with the Bang & Olufsen®, Revel® and Revel Ultima® Sound Systems.

Ford and Lincoln’s new Premium Sound Systems use Automotive Audio Bus® (A2B)[1] digital audio bus technology, which delivers high fidelity audio for automobiles while significantly reducing weight. A2B is a high bandwidth (50 Mbps) digital bus capable of transferring audio and control data with clock and power using a single, 2-wire, unshielded, twisted pair cable over distances up to 32 feet (10 meters) between devices. It supports multiple microphone arrays in vehicles to enable applications such as voice recognition, active noise cancellation, and in-car communications. However, due to the complex nature of A2B audio systems, vehicles utilizing the technology have been difficult to integrate with, leading to poor sound quality, reoccurring come backs and customer dissatisfaction.

NAV-TV is proud to announce that there is now a solution for A2B audio integration! The ZEN-A2B allows the seamless addition of aftermarket amplifiers into compatible vehicles, delivering audiophile-quality sound without compromising the vehicle’s factory fit, finish or features. 

Utilizing the same processing power as NAV-TV’s competition proven M650-GM, the ZEN-A2B produces a completely flat audio output without any factory time delay or equalization, eliminating the need for summing devices, an audio correction DSP or the removal of the factory audio compensation microphones. Volume, Fade[2], Balance and Bass/Treble tone controls are retained through the factory radio and echo cancellation for the factory Bluetooth hands-free system is supported.

Traditional audio integration devices convert a high level output from the factory radio or amplifier to low level, or manipulate a fixed preamp level audio signal. However, this method relies on the factory radio or amplifier to perform the digital to analog conversion (D/A) and may lead to less than ideal sound quality.  Unlike traditional devices, the ZEN-A2B extracts the audio directly from the A2B digital audio stream and performs the D/A conversion internally. Utilizing a 128 bit floating point DSP and 384 kHz 32 bit DAC, the ZEN-A2B produces a 12 channel analog output with an extremely low noise floor and a S/N Ratio of 114dB. 

For use with 3rd party digital sound processors[2], the ZEN-A2B includes a variable TOSlink digital output which may be used simultaneously with the analog outputs, or by itself. The variable digital output allows for the system volume to be controlled via the factory radio and steering wheel controls without the need to access any 3rd party controller.

For ease of use, the ZEN-A2B  is configurable through dip switch settings.  User selectable features of the ZEN-A2B are:

• Full scale audio or -12dB attenuation
• Loudness on or off

Pre-orders of the ZEN-A2B (NTV-KIT873) are being accepted now with a shipping date of May 15th, 2018. To place a pre-order, or for more information on the ZEN-A2B, please contact your NAV-TV sales representative at (866) 477-3336  (USA and Canada toll free) or +1(561) 955-9770 (International), or email our sales staff at This email address is being protected from spambots. You need JavaScript enabled to view it.. European customers with inquiries may contact NAV-TV UK at +44-333-700-1515 or by emailing This email address is being protected from spambots. You need JavaScript enabled to view it..

NAV-TV Corp is a solely owned and privately held corporation based in Coral Springs, FL, USA. Established in 1999, NAV-TV is a prime manufacturer, distributor and contract manufacturer of OEM and Aftermarket integration and electronic components. Additional information about NAV-TV is available at www.navtv.com or by emailing This email address is being protected from spambots. You need JavaScript enabled to view it.

[1] A2B is a registered trademark of Analog Devices, Inc.

[2] Please refer to the operation and installation manual of your 3rd party DSP or device, or contact the manufacturer directly. Although NAV-TV has tested numerous 3rd Party DSP devices for compatibility with the ZEN-A2B, we cannot provide technical support on 3rd party products.

Advanced Amplifier Interface for Ford and Lincoln Vehicles with Bang & Olufsen®, Revel® and Revel Ultima® Sound Systems

May 9, 2018 -- NAV-TV Corp., a leading innovator and manufacturer of OEM integration and safety products for the automotive aftermarket, announces the ZEN-A2B amplifier interface for select Ford and Lincoln vehicles with the Bang & Olufsen®, Revel® and Revel Ultima® Sound Systems.

Ford and Lincoln’s new Premium Sound Systems use Automotive Audio Bus® (A2B)[1] digital audio bus technology, which delivers high fidelity audio for automobiles while significantly reducing weight. A2B is a high bandwidth (50 Mbps) digital bus capable of transferring audio and control data with clock and power using a single, 2-wire, unshielded, twisted pair cable over distances up to 32 feet (10 meters) between devices. It supports multiple microphone arrays in vehicles to enable applications such as voice recognition, active noise cancellation, and in-car communications. However, due to the complex nature of A2B audio systems, vehicles utilizing the technology have been difficult to integrate with, leading to poor sound quality, reoccurring come backs and customer dissatisfaction.

NAV-TV is proud to announce that there is now a solution for A2B audio integration! The ZEN-A2B allows the seamless addition of aftermarket amplifiers into compatible vehicles, delivering audiophile-quality sound without compromising the vehicle’s factory fit, finish or features. 

• Full scale audio or -12dB attenuation
• Loudness on or off

August 1, 2019 -- Coral Springs, Fla. and St. Petersburg, Russia -- NAV-TV Corp® has partnered with Author Alarm, a leading developer of CAN based vehicle security, convenience and comfort products, to provide exclusive distribution and support for Author Alarm products in the USA. The Companies will be debuting the entire Author Alarm lineup this month during the Dallas, Texas KnowledgeFest event in booths 443 and 843.

Author Alarm products are vehicle agnostic and are flashed with vehicle-specific software upon installation. This allows the authorized dealer to stock less inventory, yet cover a wide range of vehicles at the same time. 

March 11, 2020 - Coral Springs, Fla. and Rocky Mount, NC -- NAV-TV Corp., a leading innovator and manufacturer of OEM integration and safety products for the automotive aftermarket, and Kaba Ilco Corp., the largest US-based manufacturer of key blanks and remote transponders for the automotive aftermarket, announce that they have entered into a strategic partnership.  

Under the partnership, authorized NAV-TV dealers will have access to the complete line of Kaba Ilco automotive Futura key cutting and duplicating machines, Keyfob programming units, Key Blanks, and Look-Alike® Remotes, enabling US-based 12 Volt Retailers with the ability to cut, program and clone automotive key fobs and remote controls.

“This opportunity opens up a completely new category for 12-volt retailers,” said NAV-TV Account Executive, Richard Flynn. “Not only does this provide NAV-TV dealers with a new profit center, but it will help to drive customers into their stores that would otherwise not be exposed to what our industry has to offer.”

Ilco and NAV-TV have been running test markets with select NAV-TV dealers since December 2019. Vik Moolchandani, General Manager of Long Island, NY based Avenue Sound, said, “We brought the Ilco system into our Patchogue location in December of last year and have had tremendous success with the product. We are seeing attachment sales of the key fobs to existing customer tickets, as well as increased foot traffic as a direct result of the category. The key fob programming and key cutting services have opened up a new, high-profit revue stream for us and we will be adding an additional Ilco system at our Freeport location soon.”

Setup and product training is provided at no additional charge and attractive equipment financing and lease options are available. For dealers that may have an existing key cutting machine and/or key fob programmers, the Ilco key blanks and look-alike remotes may be ordered a-la-cart. According to Ilco, their products are not affected by the coronavirus parts availability shortage, and their products may be directly substituted for competing products that may be in limited availability.

“Our new partnership with NAV-TV has not only opened our eyes to a brand new channel, but has provided exposure to a new information stream that will no doubt help us in the development of new products,” said Kaba Ilco Account Manager, Jeff Brown. “We are excited and look forward to the future of our partnership.”

NAV-TV representative Phil Chartier and Ilco’s Jeff Brown will be visiting NAV-TV dealers with the Ilco demonstration van throughout the New England and New York area during late April and early May, with additional territories to be announced shortly. To schedule a free product demonstration at your facility, please email Phil at This email address is being protected from spambots. You need JavaScript enabled to view it. for an appointment.  

For more information on Kaba Ilco products, or NAV-TV’s existing line of over 950 other integration and safety products, please contact your NAV-TV sales representative at (866) 477-3336  (USA and Canada toll free) or (561) 955-9770 (International), or email our sales staff at This email address is being protected from spambots. You need JavaScript enabled to view it..

NAV-TV Corp is a solely owned and privately held corporation based in Coral Springs, FL, USA. Established in 1999, NAV-TV is a prime manufacturer, distributor and contract manufacturer of OEM and Aftermarket integration and electronic components. Additional information about NAV-TV is available at www.navtv.com or by emailing This email address is being protected from spambots. You need JavaScript enabled to view it..

Kaba Ilco Corp. is the largest US-based key blank manufacturer located in Rocky Mount, North Carolina. In our 300,000 sq. ft. vertically integrated (brass foundry to finish goods) state-of-the-art ISO Certified manufacturing facility we produce millions of keys each week. These keys range from original equipment keys manufactured for the lock and automobile industry to aftermarket keys sold to security and automotive professionals, retail and service stores throughout North America.

The Ilco brand is known for exceptional quality at competitive prices. Our company and employees are committed to high-quality standards and innovative technology. We are a leader in key blanks as well as in automotive transponder technology, key cutting/duplication machines, look-alike remotes, and automotive programming equipment.

Our sister companies, Silca and Advanced Diagnostics add to our group’s overall strength making us the prime single direct source for the broadest and deepest product range in the industry worldwide.

Silca, located in Italy provides innovative, top-performing key duplication equipment and as well as a line of key blanks.  When this line is combined with the Ilco line of Key Blanks, our customer base has access to over 80,000 different key blanks.

Advanced Diagnostics, located in the UK is the world’s leader in Automotive Programming equipment. The technologically advanced systems, developed and supported by Advanced Diagnostics, assures customers of the most up to date and accurate programming systems available.

Our combined companies provide not only the broadest line of keys, extensive line of key cutting machines and technologically advanced automotive programming and cloning systems but in North America.

Daytona Beach, Fla. -- March 5, 2019 -- Daytona Beach Bike Week is almost here and motorcycle enthusiasts from around the country are dusting off their bikes in preparation for the upcoming event. Besides a tune up, a few last minute customizations and a good detailing, many Harley owners are flocking to their local audio specialist to upgrade their stereo system.

According to Peter Jensen, owner of Soundz, Inc. located in Daytona Beach, “One of the most popular requests has been to add Apple Carplay® to 2014 to 2018 Harleys. Harley Davidson® introduced the GTS radio with Carplay® in 2019 and customers with older bikes are looking for a way to retrofit them. Unfortunately, the GTS radio will not work in the 2014 to 2016 models at all, and the 2017-2018 models require first changing out the ECM, BCM, ABS module and instrument cluster to 2019 model year equipment. These parts are about $2,000.00 alone and take about 5 hours to install and code properly; and that does not include the $1899.00 additional cost of the GTS radio. Plus, the retrofitted 2019 ABS module throws codes which could become problematic, or even affect the factory warranty. We knew we had to find a way to offer our clients a seamless GTS radio retrofit and reached out to NAV-TV for help.”

After months of product development, NAV-TV® and Soundz are pleased to announce the release of the SC-GTSi head unit replacement interface for 2014 to 2018 Harley Davidson® motorcycles. The SC-GTSi, offered exclusively through Soundz, is a plug-and-play interface that allows the 2019 GTS radio with Apple Carplay® to be seamlessly installed into 2014 to 2018 motorcycles. The interface requires no control unit replacement, no coding and does not affect the factory warranty. The module is transparent to both the factory Harley Davidson® and Techno Research® diagnostic, troubleshooting and tuning computer systems.  In addition, all factory functions of the radio and motorcycle are retained.

The SC-GTSi is available at an MSRP of $449.99, including a plug-and-play T-harness to integrate with the factory wiring and a mounting bracket for the interface. For a complete turn-key solution, Soundz also offers a package that includes the GTS Radio with Carplay®, model specific coding for the radio, the SC-GTSi interface, T-harness and mounting bracket for $2,348.99.

The SC-GTSi interface is compatible with the following Model and Year Harley Davidson® Motorcycles:

2018

NAV-TV® to Support Canadian Dealers Directly in 2019

Coral Springs, Fla. -- January 17, 2019 -- NAV-TV Corp., a leading innovator and manufacturer of OEM integration and safety products for the automotive aftermarket, will begin offering direct dealer purchases of NAV-TV products to Mobile Electronics Retailers in Canada effective immediately.

“With our SKU count now exceeding 900 products and vehicle complexity increasing at an exponential rate, we have decided that a direct approach for both sales and support is in the best interest of NAV-TV dealers. Beginning this month we will be discontinuing distribution of NAV-TV products throughout Canada and offering direct sales and support. We wish to thank Automobility Distribution for over a decade of support and service to the NAV-TV Brand and will be working with them to ensure a simple and seamless transition,” stated NAV-TV Vice President, Derek Schmiedl.

By establishing a vendor-direct relationship with NAV-TV, Canadian Dealers will have access to factory-direct sales and technical support. In addition, dealer programs and incentives will be extended to Canadian NAV-TV dealers without any opening order requirement.

NAV-TV dealer programs include:

·         3 Year Warranty

·         4 levels of DFI (discount from invoice) Silver, Gold, Platinum and Diamond

·         Shipping Discounts

·         Stock Rotations

·         Point of Purchase Literature

·         Customized Sell Sheets with the Dealer’s Logo

·         Priority Access to NAV-TV Technical & Sales Support

·         Discounted Demo and Employee Purchase Accommodations

Direct dealer setup is fast and free. To sign up as a dealer, or for more information, please contact our sales and support department toll free from the US or Canada at 1-866-477-3336 or email us at This email address is being protected from spambots. You need JavaScript enabled to view it..

NAV-TV Corp is a solely owned and privately held corporation based in Coral Springs, FL, USA. Established in 1999, NAV-TV is a prime manufacturer, distributor and contract manufacturer of OEM and Aftermarket integration and electronic components. Additional information about NAV-TV is available at www.navtv.com or by emailing This email address is being protected from spambots. You need JavaScript enabled to view it..